From: Andre Heider <a.heider@gmail.com>
Date: Fri, 1 Oct 2021 18:29:00 +0000 (+0100)
Subject: sunxi: board: extract creating a unique sid into a helper function
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=928f4f48682a5277ca4efd0f3c4e79671dcc8e29;p=u-boot.git

sunxi: board: extract creating a unique sid into a helper function

Refactor setup_environment() so we can use the created sid for a
Bluetooth address too.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[rebased]
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 77e4647188..b7f527a0fa 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -789,6 +789,38 @@ static void parse_spl_header(const uint32_t spl_addr)
 	env_set_hex("fel_scriptaddr", spl->fel_script_address);
 }
 
+static bool get_unique_sid(unsigned int *sid)
+{
+	if (sunxi_get_sid(sid) != 0)
+		return false;
+
+	if (!sid[0])
+		return false;
+
+	/*
+	 * The single words 1 - 3 of the SID have quite a few bits
+	 * which are the same on many models, so we take a crc32
+	 * of all 3 words, to get a more unique value.
+	 *
+	 * Note we only do this on newer SoCs as we cannot change
+	 * the algorithm on older SoCs since those have been using
+	 * fixed mac-addresses based on only using word 3 for a
+	 * long time and changing a fixed mac-address with an
+	 * u-boot update is not good.
+	 */
+#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
+    !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
+    !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
+	sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
+#endif
+
+	/* Ensure the NIC specific bytes of the mac are not all 0 */
+	if ((sid[3] & 0xffffff) == 0)
+		sid[3] |= 0x800000;
+
+	return true;
+}
+
 /*
  * Note this function gets called multiple times.
  * It must not make any changes to env variables which already exist.
@@ -799,61 +831,40 @@ static void setup_environment(const void *fdt)
 	unsigned int sid[4];
 	uint8_t mac_addr[6];
 	char ethaddr[16];
-	int i, ret;
+	int i;
 
-	ret = sunxi_get_sid(sid);
-	if (ret == 0 && sid[0] != 0) {
-		/*
-		 * The single words 1 - 3 of the SID have quite a few bits
-		 * which are the same on many models, so we take a crc32
-		 * of all 3 words, to get a more unique value.
-		 *
-		 * Note we only do this on newer SoCs as we cannot change
-		 * the algorithm on older SoCs since those have been using
-		 * fixed mac-addresses based on only using word 3 for a
-		 * long time and changing a fixed mac-address with an
-		 * u-boot update is not good.
-		 */
-#if !defined(CONFIG_MACH_SUN4I) && !defined(CONFIG_MACH_SUN5I) && \
-    !defined(CONFIG_MACH_SUN6I) && !defined(CONFIG_MACH_SUN7I) && \
-    !defined(CONFIG_MACH_SUN8I_A23) && !defined(CONFIG_MACH_SUN8I_A33)
-		sid[3] = crc32(0, (unsigned char *)&sid[1], 12);
-#endif
-
-		/* Ensure the NIC specific bytes of the mac are not all 0 */
-		if ((sid[3] & 0xffffff) == 0)
-			sid[3] |= 0x800000;
+	if (!get_unique_sid(sid))
+		return;
 
-		for (i = 0; i < 4; i++) {
-			sprintf(ethaddr, "ethernet%d", i);
-			if (!fdt_get_alias(fdt, ethaddr))
-				continue;
+	for (i = 0; i < 4; i++) {
+		sprintf(ethaddr, "ethernet%d", i);
+		if (!fdt_get_alias(fdt, ethaddr))
+			continue;
 
-			if (i == 0)
-				strcpy(ethaddr, "ethaddr");
-			else
-				sprintf(ethaddr, "eth%daddr", i);
+		if (i == 0)
+			strcpy(ethaddr, "ethaddr");
+		else
+			sprintf(ethaddr, "eth%daddr", i);
 
-			if (env_get(ethaddr))
-				continue;
+		if (env_get(ethaddr))
+			continue;
 
-			/* Non OUI / registered MAC address */
-			mac_addr[0] = (i << 4) | 0x02;
-			mac_addr[1] = (sid[0] >>  0) & 0xff;
-			mac_addr[2] = (sid[3] >> 24) & 0xff;
-			mac_addr[3] = (sid[3] >> 16) & 0xff;
-			mac_addr[4] = (sid[3] >>  8) & 0xff;
-			mac_addr[5] = (sid[3] >>  0) & 0xff;
+		/* Non OUI / registered MAC address */
+		mac_addr[0] = (i << 4) | 0x02;
+		mac_addr[1] = (sid[0] >>  0) & 0xff;
+		mac_addr[2] = (sid[3] >> 24) & 0xff;
+		mac_addr[3] = (sid[3] >> 16) & 0xff;
+		mac_addr[4] = (sid[3] >>  8) & 0xff;
+		mac_addr[5] = (sid[3] >>  0) & 0xff;
 
-			eth_env_set_enetaddr(ethaddr, mac_addr);
-		}
+		eth_env_set_enetaddr(ethaddr, mac_addr);
+	}
 
-		if (!env_get("serial#")) {
-			snprintf(serial_string, sizeof(serial_string),
-				"%08x%08x", sid[0], sid[3]);
+	if (!env_get("serial#")) {
+		snprintf(serial_string, sizeof(serial_string),
+			"%08x%08x", sid[0], sid[3]);
 
-			env_set("serial#", serial_string);
-		}
+		env_set("serial#", serial_string);
 	}
 }