From: Heiko Schocher Date: Sat, 10 Oct 2020 08:28:05 +0000 (+0200) Subject: env: Access Environment in SPI flashes before relocation X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=92765f45bb950c24b8997752ab94f35c1fb4425f;p=u-boot.git env: Access Environment in SPI flashes before relocation Enable the new Kconfig option ENV_SPI_EARLY if you want to use Environment in SPI flash before relocation. Call env_init() and than you can use env_get_f() for accessing Environment variables. Signed-off-by: Heiko Schocher Reviewed-by: Simon Glass --- diff --git a/env/Kconfig b/env/Kconfig index aa63fae021..67ce93061b 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -376,6 +376,14 @@ config ENV_SPI_MODE Value of the SPI work mode for environment. See include/spi.h for value. +config ENV_SPI_EARLY + bool "Access Environment in SPI flashes before relocation" + depends on ENV_IS_IN_SPI_FLASH + help + Enable this if you want to use Environment in SPI flash + before relocation. Call env_init() and than you can use + env_get_f() for accessing Environment variables. + config ENV_IS_IN_UBI bool "Environment in a UBI volume" depends on !CHAIN_OF_TRUST diff --git a/env/sf.c b/env/sf.c index 937778aa37..2eb2de1a4e 100644 --- a/env/sf.c +++ b/env/sf.c @@ -287,7 +287,10 @@ __weak void *env_sf_get_env_addr(void) #endif #if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0) -static int env_sf_init(void) +/* + * check if Environment on CONFIG_ENV_ADDR is valid. + */ +static int env_sf_init_addr(void) { env_t *env_ptr = (env_t *)env_sf_get_env_addr(); @@ -303,12 +306,103 @@ static int env_sf_init(void) } #endif +#if defined(CONFIG_ENV_SPI_EARLY) +/* + * early load environment from SPI flash (before relocation) + * and check if it is valid. + */ +static int env_sf_init_early(void) +{ + int ret; + int read1_fail; + int read2_fail; + int crc1_ok; + env_t *tmp_env2 = NULL; + env_t *tmp_env1; + + /* + * if malloc is not ready yet, we cannot use + * this part yet. + */ + if (!gd->malloc_limit) + return -ENOENT; + + tmp_env1 = (env_t *)memalign(ARCH_DMA_MINALIGN, + CONFIG_ENV_SIZE); + if (IS_ENABLED(CONFIG_SYS_REDUNDAND_ENVIRONMENT)) + tmp_env2 = (env_t *)memalign(ARCH_DMA_MINALIGN, + CONFIG_ENV_SIZE); + + if (!tmp_env1 || !tmp_env2) + goto out; + + ret = setup_flash_device(); + if (ret) + goto out; + + read1_fail = spi_flash_read(env_flash, CONFIG_ENV_OFFSET, + CONFIG_ENV_SIZE, tmp_env1); + + if (IS_ENABLED(CONFIG_SYS_REDUNDAND_ENVIRONMENT)) { + read2_fail = spi_flash_read(env_flash, + CONFIG_ENV_OFFSET_REDUND, + CONFIG_ENV_SIZE, tmp_env2); + ret = env_check_redund((char *)tmp_env1, read1_fail, + (char *)tmp_env2, read2_fail); + + if (ret == -EIO || ret == -ENOMSG) + goto err_read; + + if (gd->env_valid == ENV_VALID) + gd->env_addr = (unsigned long)&tmp_env1->data; + else + gd->env_addr = (unsigned long)&tmp_env2->data; + } else { + if (read1_fail) + goto err_read; + + crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == + tmp_env1->crc; + if (!crc1_ok) + goto err_read; + + /* if valid -> this is our env */ + gd->env_valid = ENV_VALID; + gd->env_addr = (unsigned long)&tmp_env1->data; + } + + return 0; +err_read: + spi_flash_free(env_flash); + env_flash = NULL; + free(tmp_env1); + if (IS_ENABLED(CONFIG_SYS_REDUNDAND_ENVIRONMENT)) + free(tmp_env2); +out: + /* env is not valid. always return 0 */ + gd->env_valid = ENV_INVALID; + return 0; +} +#endif + +static int env_sf_init(void) +{ +#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0) + return env_sf_init_addr(); +#elif defined(CONFIG_ENV_SPI_EARLY) + return env_sf_init_early(); +#endif + /* + * we must return with 0 if there is nothing done, + * else env_set_inited() get not called in env_init() + */ + return 0; +} + U_BOOT_ENV_LOCATION(sf) = { .location = ENVL_SPI_FLASH, ENV_NAME("SPIFlash") .load = env_sf_load, .save = CONFIG_IS_ENABLED(SAVEENV) ? ENV_SAVE_PTR(env_sf_save) : NULL, -#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0) .init = env_sf_init, -#endif };