From: pekon gupta Date: Fri, 11 Apr 2014 07:25:33 +0000 (+0530) Subject: mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9233279f8e33d1b3d21958d8afe10fbc3e46b3f2;p=u-boot.git mtd: nand: omap_gpmc: rename struct nand_bch_priv to struct omap_nand_info This patch renames 'struct nand_bch_priv' which currently holds private data only for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for all ECC schemes Signed-off-by: Pekon Gupta Reviewed-by: Stefan Roese --- diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 1972b0ecae..391a26858c 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -148,9 +148,9 @@ static int __maybe_unused omap_correct_data(struct mtd_info *mtd, uint8_t *dat, } /* - * Generic BCH interface + * Driver configurations */ -struct nand_bch_priv { +struct omap_nand_info { struct bch_control *control; enum omap_ecc ecc_scheme; }; @@ -161,7 +161,7 @@ struct nand_bch_priv { * library). * When some users with other BCH strength will exists this have to change! */ -static __maybe_unused struct nand_bch_priv bch_priv = { +static __maybe_unused struct omap_nand_info omap_nand_info = { .control = NULL }; @@ -191,7 +191,7 @@ __maybe_unused static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) { struct nand_chip *nand = mtd->priv; - struct nand_bch_priv *bch = nand->priv; + struct omap_nand_info *info = nand->priv; unsigned int dev_width = (nand->options & NAND_BUSWIDTH_16) ? 1 : 0; unsigned int ecc_algo = 0; unsigned int bch_type = 0; @@ -200,7 +200,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) u32 ecc_config_val = 0; /* configure GPMC for specific ecc-scheme */ - switch (bch->ecc_scheme) { + switch (info->ecc_scheme) { case OMAP_ECC_HAM1_CODE_SW: return; case OMAP_ECC_HAM1_CODE_HW: @@ -262,11 +262,11 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, uint8_t *ecc_code) { struct nand_chip *chip = mtd->priv; - struct nand_bch_priv *bch = chip->priv; + struct omap_nand_info *info = chip->priv; uint32_t *ptr, val = 0; int8_t i = 0, j; - switch (bch->ecc_scheme) { + switch (info->ecc_scheme) { case OMAP_ECC_HAM1_CODE_HW: val = readl(&gpmc_cfg->ecc1_result); ecc_code[0] = val & 0xFF; @@ -294,7 +294,7 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat, return -EINVAL; } /* ECC scheme specific syndrome customizations */ - switch (bch->ecc_scheme) { + switch (info->ecc_scheme) { case OMAP_ECC_HAM1_CODE_HW: break; #ifdef CONFIG_BCH @@ -330,7 +330,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { struct nand_chip *chip = mtd->priv; - struct nand_bch_priv *bch = chip->priv; + struct omap_nand_info *info = chip->priv; uint32_t eccbytes = chip->ecc.bytes; uint32_t error_count = 0, error_max; uint32_t error_loc[8]; @@ -360,7 +360,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, * while reading ECC result we read it in big endian. * Hence while loading to ELM we have rotate to get the right endian. */ - switch (bch->ecc_scheme) { + switch (info->ecc_scheme) { case OMAP_ECC_BCH8_CODE_HW: bch_type = BCH_8_BIT; omap_reverse_list(calc_ecc, eccbytes - 1); @@ -376,7 +376,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, } /* correct bch error */ for (count = 0; count < error_count; count++) { - switch (bch->ecc_scheme) { + switch (info->ecc_scheme) { case OMAP_ECC_BCH8_CODE_HW: /* 14th byte in ECC is reserved to match ROM layout */ error_max = SECTOR_BYTES + (eccbytes - 1); @@ -483,10 +483,10 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data, /* cannot correct more than 8 errors */ unsigned int errloc[8]; struct nand_chip *chip = mtd->priv; - struct nand_bch_priv *chip_priv = chip->priv; - struct bch_control *bch = chip_priv->control; + struct omap_nand_info *info = chip->priv; - count = decode_bch(bch, NULL, 512, read_ecc, calc_ecc, NULL, errloc); + count = decode_bch(info->control, NULL, 512, read_ecc, calc_ecc, + NULL, errloc); if (count > 0) { /* correct errors */ for (i = 0; i < count; i++) { @@ -522,15 +522,11 @@ static int omap_correct_data_bch_sw(struct mtd_info *mtd, u_char *data, static void __maybe_unused omap_free_bch(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; - struct nand_bch_priv *chip_priv = chip->priv; - struct bch_control *bch = NULL; + struct omap_nand_info *info = chip->priv; - if (chip_priv) - bch = chip_priv->control; - - if (bch) { - free_bch(bch); - chip_priv->control = NULL; + if (info->control) { + free_bch(info->control); + info->control = NULL; } } #endif /* CONFIG_BCH */ @@ -544,7 +540,7 @@ static void __maybe_unused omap_free_bch(struct mtd_info *mtd) */ static int omap_select_ecc_scheme(struct nand_chip *nand, enum omap_ecc ecc_scheme, unsigned int pagesize, unsigned int oobsize) { - struct nand_bch_priv *bch = nand->priv; + struct omap_nand_info *info = nand->priv; struct nand_ecclayout *ecclayout = &omap_ecclayout; int eccsteps = pagesize / SECTOR_BYTES; int i; @@ -554,11 +550,10 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, debug("nand: selected OMAP_ECC_HAM1_CODE_SW\n"); /* For this ecc-scheme, ecc.bytes, ecc.layout, ... are * initialized in nand_scan_tail(), so just set ecc.mode */ - bch_priv.control = NULL; + info->control = NULL; nand->ecc.mode = NAND_ECC_SOFT; nand->ecc.layout = NULL; nand->ecc.size = 0; - bch->ecc_scheme = OMAP_ECC_HAM1_CODE_SW; break; case OMAP_ECC_HAM1_CODE_HW: @@ -569,7 +564,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, (3 * eccsteps) + BADBLOCK_MARKER_LENGTH)); return -EINVAL; } - bch_priv.control = NULL; + info->control = NULL; /* populate ecc specific fields */ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl)); nand->ecc.mode = NAND_ECC_HW; @@ -590,7 +585,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - BADBLOCK_MARKER_LENGTH; - bch->ecc_scheme = OMAP_ECC_HAM1_CODE_HW; break; case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: @@ -603,8 +597,8 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, return -EINVAL; } /* check if BCH S/W library can be used for error detection */ - bch_priv.control = init_bch(13, 8, 0x201b); - if (!bch_priv.control) { + info->control = init_bch(13, 8, 0x201b); + if (!info->control) { printf("nand: error: could not init_bch()\n"); return -ENODEV; } @@ -631,7 +625,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - BADBLOCK_MARKER_LENGTH; - bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW_DETECTION_SW; break; #else printf("nand: error: CONFIG_BCH required for ECC\n"); @@ -649,6 +642,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, } /* intialize ELM for ECC error detection */ elm_init(); + info->control = NULL; /* populate ecc specific fields */ memset(&nand->ecc, 0, sizeof(struct nand_ecc_ctrl)); nand->ecc.mode = NAND_ECC_HW; @@ -666,7 +660,6 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, ecclayout->oobfree[0].offset = i + BADBLOCK_MARKER_LENGTH; ecclayout->oobfree[0].length = oobsize - ecclayout->eccbytes - BADBLOCK_MARKER_LENGTH; - bch->ecc_scheme = OMAP_ECC_BCH8_CODE_HW; break; #else printf("nand: error: CONFIG_NAND_OMAP_ELM required for ECC\n"); @@ -682,6 +675,7 @@ static int omap_select_ecc_scheme(struct nand_chip *nand, if (ecc_scheme != OMAP_ECC_HAM1_CODE_SW) nand->ecc.layout = ecclayout; + info->ecc_scheme = ecc_scheme; return 0; } @@ -785,7 +779,7 @@ int board_nand_init(struct nand_chip *nand) nand->IO_ADDR_R = (void __iomem *)&gpmc_cfg->cs[cs].nand_dat; nand->IO_ADDR_W = (void __iomem *)&gpmc_cfg->cs[cs].nand_cmd; - nand->priv = &bch_priv; + nand->priv = &omap_nand_info; nand->cmd_ctrl = omap_nand_hwcontrol; nand->options |= NAND_NO_PADDING | NAND_CACHEPRG; /* If we are 16 bit dev, our gpmc config tells us that */