From: Sergiu Moga Date: Fri, 13 May 2022 15:13:41 +0000 (+0300) Subject: configs: at91: sama5d2_icp: enable QSPI and SF command X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=92099e69a2943dc24675041222cfd8d6a43db44f;p=u-boot.git configs: at91: sama5d2_icp: enable QSPI and SF command Add the configurations required for enabling QSPI and the SF command to allow changes to be made dynamically to serial flash devices from the command line interface. Signed-off-by: Sergiu Moga Reviewed-by: Tudor Ambarus --- diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index 688fa00d23..57b76c3a5e 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -55,6 +55,7 @@ CONFIG_CMD_DM=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y # CONFIG_CMD_LOADS is not set +CONFIG_CMD_SF_TEST=y CONFIG_CMD_MMC=y CONFIG_CMD_DHCP=y CONFIG_BOOTP_BOOTFILESIZE=y @@ -83,6 +84,15 @@ CONFIG_SYS_I2C_AT91=y CONFIG_I2C_EEPROM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SF_DEFAULT_BUS=2 +CONFIG_SF_DEFAULT_SPEED=66000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y +CONFIG_SPI_FLASH_ATMEL=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_SST=y CONFIG_DM_ETH=y CONFIG_MACB=y CONFIG_PINCTRL=y @@ -94,6 +104,9 @@ CONFIG_ATMEL_USART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_AT91=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ATMEL_QSPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_ATMEL_TCB_TIMER=y