From: Tom Rini <trini@konsulko.com>
Date: Sat, 19 Nov 2022 23:45:29 +0000 (-0500)
Subject: Convert CONFIG_NAND_KMETER1 et al to Kconfig
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=9200011e9563c2deb71eae3c6769a92ea4e6c733;p=u-boot.git

Convert CONFIG_NAND_KMETER1 et al to Kconfig

This converts the following to Kconfig:
   CONFIG_NAND_ECC_BCH
   CONFIG_NAND_KIRKWOOD
   CONFIG_NAND_KMETER1

Signed-off-by: Tom Rini <trini@konsulko.com>
---

diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index a2781e25a2..a6de767629 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -34,7 +34,6 @@
  * NAND configuration
  */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
 #define CFG_SYS_NAND_BASE		0xD8000000	/* MV_DEFADR_NANDF */
 #define NAND_ALLOW_ERASE_ALL		1
 #endif
diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig
index 71d196533f..c2a17c6212 100644
--- a/configs/kmcoge5ne_defconfig
+++ b/configs/kmcoge5ne_defconfig
@@ -235,6 +235,7 @@ CONFIG_FLASH_CFI_MTD=y
 CONFIG_SYS_FLASH_PROTECTION=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_KMETER1=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_QE_UEC=y
 # CONFIG_PCI is not set
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index eb37b62759..338a3562a4 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -225,6 +225,19 @@ config NAND_FSL_IFC
 	help
 	  Enable the Freescale Integrated Flash Controller NAND driver.
 
+config NAND_KIRKWOOD
+	bool "Support for Kirkwood NAND controller"
+	depends on ARCH_KIRKWOOD
+	default y
+
+config NAND_ECC_BCH
+	bool
+
+config NAND_KMETER1
+	bool "Support KMETER1 NAND controller"
+	depends on VENDOR_KM
+	select NAND_ECC_BCH
+
 config NAND_LPC32XX_MLC
 	bool "Support LPC32XX_MLC controller"
 	select SYS_NAND_SELF_INIT
diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h
index e6a3613b7a..840a4d5401 100644
--- a/include/configs/km/km-mpc83xx.h
+++ b/include/configs/km/km-mpc83xx.h
@@ -57,7 +57,6 @@
 		{1, {I2C_NULL_HOP} } }
 
 #if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_KMETER1
 #define CFG_SYS_NAND_BASE		CFG_SYS_KMBEC_FPGA_BASE
 #endif
 
diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h
index 2be996aaaf..c24d6ad8bc 100644
--- a/include/configs/kmcoge5ne.h
+++ b/include/configs/kmcoge5ne.h
@@ -9,8 +9,6 @@
 #define __CONFIG_H
 
 #define CONFIG_HOSTNAME		"kmcoge5ne"
-#define CONFIG_NAND_ECC_BCH
-#define CONFIG_NAND_KMETER1
 #define NAND_MAX_CHIPS				1
 #define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */