From: Tom Rini <trini@konsulko.com>
Date: Fri, 13 Jul 2018 13:05:05 +0000 (-0400)
Subject: Merge branch 'master' of git://git.denx.de/u-boot-socfpga
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=914bb7ea2f9373fa59285ff77a95df73848c8f66;p=u-boot.git

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

- Update SPDX tag in arch/arm/mach-socfpga/spl_a10.c

Signed-off-by: Tom Rini <trini@konsulko.com>
---

914bb7ea2f9373fa59285ff77a95df73848c8f66
diff --cc arch/arm/mach-socfpga/spl_a10.c
index 0000000000,e6fc766fca..fe4782c9cb
mode 000000,100644..100644
--- a/arch/arm/mach-socfpga/spl_a10.c
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@@ -1,0 -1,105 +1,104 @@@
++// SPDX-License-Identifier: GPL-2.0+
+ /*
+  *  Copyright (C) 2012 Altera Corporation <www.altera.com>
 - *
 - * SPDX-License-Identifier:	GPL-2.0+
+  */
+ 
+ #include <common.h>
+ #include <asm/io.h>
+ #include <asm/pl310.h>
+ #include <asm/u-boot.h>
+ #include <asm/utils.h>
+ #include <image.h>
+ #include <asm/arch/reset_manager.h>
+ #include <spl.h>
+ #include <asm/arch/system_manager.h>
+ #include <asm/arch/freeze_controller.h>
+ #include <asm/arch/clock_manager.h>
+ #include <asm/arch/scan_manager.h>
+ #include <asm/arch/sdram.h>
+ #include <asm/arch/scu.h>
+ #include <asm/arch/nic301.h>
+ #include <asm/sections.h>
+ #include <fdtdec.h>
+ #include <watchdog.h>
+ #include <asm/arch/pinmux.h>
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
+ static const struct socfpga_system_manager *sysmgr_regs =
+ 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+ 
+ u32 spl_boot_device(void)
+ {
+ 	const u32 bsel = readl(&sysmgr_regs->bootinfo);
+ 
+ 	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
+ 	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
+ 		return BOOT_DEVICE_RAM;
+ 	case 0x2:	/* NAND Flash (1.8V) */
+ 	case 0x3:	/* NAND Flash (3.0V) */
+ 		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+ 		return BOOT_DEVICE_NAND;
+ 	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
+ 	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
+ 		socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
+ 		socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
+ 		return BOOT_DEVICE_MMC1;
+ 	case 0x6:	/* QSPI Flash (1.8V) */
+ 	case 0x7:	/* QSPI Flash (3.0V) */
+ 		socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
+ 		return BOOT_DEVICE_SPI;
+ 	default:
+ 		printf("Invalid boot device (bsel=%08x)!\n", bsel);
+ 		hang();
+ 	}
+ }
+ 
+ #ifdef CONFIG_SPL_MMC_SUPPORT
+ u32 spl_boot_mode(const u32 boot_device)
+ {
+ #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+ 	return MMCSD_MODE_FS;
+ #else
+ 	return MMCSD_MODE_RAW;
+ #endif
+ }
+ #endif
+ 
+ void spl_board_init(void)
+ {
+ 	/* configuring the clock based on handoff */
+ 	cm_basic_init(gd->fdt_blob);
+ 	WATCHDOG_RESET();
+ 
+ 	config_dedicated_pins(gd->fdt_blob);
+ 	WATCHDOG_RESET();
+ 
+ 	/* Release UART from reset */
+ 	socfpga_reset_uart(0);
+ 
+ 	/* enable console uart printing */
+ 	preloader_console_init();
+ }
+ 
+ void board_init_f(ulong dummy)
+ {
+ 	/*
+ 	 * Configure Clock Manager to use intosc clock instead external osc to
+ 	 * ensure success watchdog operation. We do it as early as possible.
+ 	 */
+ 	cm_use_intosc();
+ 
+ 	socfpga_watchdog_disable();
+ 
+ 	arch_early_init_r();
+ 
+ #ifdef CONFIG_HW_WATCHDOG
+ 	/* release osc1 watchdog timer 0 from reset */
+ 	socfpga_reset_deassert_osc1wd0();
+ 
+ 	/* reconfigure and enable the watchdog */
+ 	hw_watchdog_init();
+ 	WATCHDOG_RESET();
+ #endif /* CONFIG_HW_WATCHDOG */
+ }