From: Tim Harvey Date: Tue, 18 Jun 2024 21:06:08 +0000 (-0700) Subject: use fdt_kaslrseed function to de-duplicate code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=909321bc6b527d2464c24e94185a3585c105f5f7;p=u-boot.git use fdt_kaslrseed function to de-duplicate code Use the fdt_kaslrseed function to deduplicate code doing the same thing. Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now but left in place in case boot scripts exist that rely on this command existing and returning success. An informational message is printed to alert users of this command that it is likely no longer needed. Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for randomization and completely ignores the kaslr-seed for its own randomness needs (i.e the randomization of the physical placement of the kernel). It gets weeded out from the DTB that gets handed over via efi_install_fdt() as it would also mess up the measured boot DTB TPM measurements as well. Signed-off-by: Tim Harvey Reviewed-by: Simon Glass Cc: Michal Simek Cc: Andy Yan Cc: Akash Gajjar Cc: Ilias Apalodimas Cc: Simon Glass Cc: Patrick Delaunay Cc: Patrice Chotard Cc: Devarsh Thakkar Cc: Heinrich Schuchardt Cc: Hugo Villeneuve Cc: Marek Vasut Cc: Tom Rini Cc: Chris Morgan Acked-by: Michal Simek --- diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index b47d2d23f9..098738017b 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -702,11 +702,6 @@ phys_addr_t board_get_usable_ram_top(phys_size_t total_size) #define MAX_RAND_SIZE 8 int ft_board_setup(void *blob, struct bd_info *bd) { - size_t n = MAX_RAND_SIZE; - struct udevice *dev; - u8 buf[MAX_RAND_SIZE]; - int nodeoffset, ret; - static const struct node_info nodes[] = { { "arm,pl353-nand-r2p1", MTD_DEV_TYPE_NAND, }, }; @@ -714,41 +709,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) if (IS_ENABLED(CONFIG_FDT_FIXUP_PARTITIONS) && IS_ENABLED(CONFIG_NAND_ZYNQ)) fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - debug("No RNG device\n"); - return 0; - } - - if (dm_rng_read(dev, buf, n)) { - debug("Reading RNG failed\n"); - return 0; - } - - if (!blob) { - debug("No FDT memory address configured. Please configure\n" - "the FDT address via \"fdt addr
\" command.\n" - "Aborting!\n"); - return 0; - } - - ret = fdt_check_header(blob); - if (ret < 0) { - debug("fdt_chosen: %s\n", fdt_strerror(ret)); - return ret; - } - - nodeoffset = fdt_find_or_add_subnode(blob, 0, "chosen"); - if (nodeoffset < 0) { - debug("Reading chosen node failed\n"); - return nodeoffset; - } - - ret = fdt_setprop(blob, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (ret < 0) { - debug("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret)); - return ret; - } - return 0; } #endif diff --git a/boot/pxe_utils.c b/boot/pxe_utils.c index 5c1c962ff4..38ca9b81a4 100644 --- a/boot/pxe_utils.c +++ b/boot/pxe_utils.c @@ -324,10 +324,6 @@ static void label_boot_kaslrseed(void) #if CONFIG_IS_ENABLED(DM_RNG) ulong fdt_addr; struct fdt_header *working_fdt; - size_t n = 0x8; - struct udevice *dev; - u64 *buf; - int nodeoffset; int err; /* Get the main fdt and map it */ @@ -343,35 +339,7 @@ static void label_boot_kaslrseed(void) if (err <= 0) return; - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - printf("No RNG device\n"); - return; - } - - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen"); - if (nodeoffset < 0) { - printf("Reading chosen node failed\n"); - return; - } - - buf = malloc(n); - if (!buf) { - printf("Out of memory\n"); - return; - } - - if (dm_rng_read(dev, buf, n)) { - printf("Reading RNG failed\n"); - goto err; - } - - err = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (err < 0) { - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(err)); - goto err; - } -err: - free(buf); + fdt_kaslrseed(working_fdt, true); #endif return; } diff --git a/cmd/kaslrseed.c b/cmd/kaslrseed.c index 9acb8e1638..645cab2e74 100644 --- a/cmd/kaslrseed.c +++ b/cmd/kaslrseed.c @@ -16,56 +16,21 @@ static int do_kaslr_seed(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - size_t n = 0x8; - struct udevice *dev; - u64 *buf; - int nodeoffset; - int ret = CMD_RET_SUCCESS; + int err = CMD_RET_SUCCESS; - if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) { - printf("No RNG device\n"); - return CMD_RET_FAILURE; - } - - buf = malloc(n); - if (!buf) { - printf("Out of memory\n"); - return CMD_RET_FAILURE; - } - - if (dm_rng_read(dev, buf, n)) { - printf("Reading RNG failed\n"); - return CMD_RET_FAILURE; - } + printf("Notice: a /chosen/kaslr-seed is automatically added to the device-tree when booted via booti/bootm/bootz therefore using this command is likely no longer needed\n"); if (!working_fdt) { printf("No FDT memory address configured. Please configure\n" "the FDT address via \"fdt addr
\" command.\n" "Aborting!\n"); - return CMD_RET_FAILURE; - } - - ret = fdt_check_header(working_fdt); - if (ret < 0) { - printf("fdt_chosen: %s\n", fdt_strerror(ret)); - return CMD_RET_FAILURE; - } - - nodeoffset = fdt_find_or_add_subnode(working_fdt, 0, "chosen"); - if (nodeoffset < 0) { - printf("Reading chosen node failed\n"); - return CMD_RET_FAILURE; + err = CMD_RET_FAILURE; + } else { + if (fdt_kaslrseed(working_fdt, true) < 0) + err = CMD_RET_FAILURE; } - ret = fdt_setprop(working_fdt, nodeoffset, "kaslr-seed", buf, sizeof(buf)); - if (ret < 0) { - printf("Unable to set kaslr-seed on chosen node: %s\n", fdt_strerror(ret)); - return CMD_RET_FAILURE; - } - - free(buf); - - return ret; + return cmd_process_error(cmdtp, err); } U_BOOT_LONGHELP(kaslrseed,