From: Thomas Petazzoni Date: Fri, 28 Jul 2017 21:14:28 +0000 (+0200) Subject: arch/sh: allow building in big-endian mode X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=90340c87e5eed344f6f947661ff170c8369635db;p=u-boot.git arch/sh: allow building in big-endian mode The SuperH architecture allows to be run in either little or big endian mode. Some SuperH SoCs get the little vs. big endian decision through mode pins sampled at reset, so if big endian has been choosen by HW designers, it cannot be easily changed. Therefore, it makes sense to allow building U-Boot for SuperH in big endian mode. To allow this, the only change needed is to adjust the OUTPUT_FORMAT() in the linker script. Signed-off-by: Thomas Petazzoni --- diff --git a/arch/sh/cpu/u-boot.lds b/arch/sh/cpu/u-boot.lds index 7fc91bc4aa..bd4fde9f2c 100644 --- a/arch/sh/cpu/u-boot.lds +++ b/arch/sh/cpu/u-boot.lds @@ -9,7 +9,12 @@ #include "config.h" +#ifdef CONFIG_SYS_BIG_ENDIAN +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-sh-linux") +#else OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#endif + OUTPUT_ARCH(sh) MEMORY