From: Frieder Schrempf Date: Wed, 24 Aug 2022 13:59:16 +0000 (+0200) Subject: imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8fd4c05ceca279630b547262e6584655e5c6d37f;p=u-boot.git imx: kontron-sl-mx8mm: Use the VSELECT signal to switch SD card IO voltage It turns out that it is not necessary to declare the VSELECT signal as GPIO and let the PMIC driver set it to a fixed high level. This switches the voltage between 3.3V and 1.8V by setting the PMIC register for LDO5 accordingly. Instead we can do it like other boards already do and simply mux the VSELECT signal of the USDHC interface to the pin. This makes sure that the correct voltage is selected by setting the PMIC's SD_VSEL input to high or low accordingly. Reported-by: Heiko Thiery Signed-off-by: Frieder Schrempf Reviewed-by: Heiko Thiery Reviewed-by: Fabio Estevam --- diff --git a/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi index 2c62f05cec..a42881d1a8 100644 --- a/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-kontron-bl-u-boot.dtsi @@ -62,11 +62,6 @@ &pinctrl_pmic { u-boot,dm-spl; - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - /* Disable Pullup for SD_VSEL */ - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x41 - >; }; &pinctrl_uart3 { diff --git a/arch/arm/dts/imx8mm-kontron-bl.dts b/arch/arm/dts/imx8mm-kontron-bl.dts index ca533baedc..a079322a37 100644 --- a/arch/arm/dts/imx8mm-kontron-bl.dts +++ b/arch/arm/dts/imx8mm-kontron-bl.dts @@ -321,6 +321,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -333,6 +334,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; @@ -345,6 +347,7 @@ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 >; }; }; diff --git a/arch/arm/dts/imx8mm-kontron-sl.dtsi b/arch/arm/dts/imx8mm-kontron-sl.dtsi index 11a50cffc8..7cfa747347 100644 --- a/arch/arm/dts/imx8mm-kontron-sl.dtsi +++ b/arch/arm/dts/imx8mm-kontron-sl.dtsi @@ -103,7 +103,6 @@ pinctrl-0 = <&pinctrl_pmic>; interrupt-parent = <&gpio1>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; regulators { reg_vdd_soc: BUCK1 { @@ -246,7 +245,6 @@ pinctrl_pmic: pmicgrp { fsl,pins = < MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 - MX8MM_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x141 >; };