From: Neil Armstrong Date: Thu, 26 Jan 2023 09:48:21 +0000 (+0100) Subject: ARM: meson: Add support for Odroid-N2L X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8f5e9de121003bfd9a64a5b3a503c0fbd02af823;p=u-boot.git ARM: meson: Add support for Odroid-N2L ODROID-N2L is a variant SBC in small form factor and some peripherals are removed from ODROID-N2PLUS based on S922X SoC. - On-board ethernet is removed - On-board RTC is removed - USB 3.0 hub is removed, so one USB 2.0 and one USB 3.0 host ports are available - Huge heatsink is replaced with 40x40mm heatsink, 5V active heatsink is recommended or a tall passive sink is optional - 3.5mm earjack is removed - IR remote receiver is removed - MIPI DSI port is added It doesn't use the odroid-n2 board support since ADC revision collides with Odroid-N2+ and since it doesn't have on-board ethernet no need to load the MAC address from eFuses. Link: https://lore.kernel.org/r/20230126-u-boot-odroid-n2l-v1-2-c60f695e0f6c@linaro.org Signed-off-by: Neil Armstrong --- diff --git a/arch/arm/dts/meson-g12b-odroid-n2l-u-boot.dtsi b/arch/arm/dts/meson-g12b-odroid-n2l-u-boot.dtsi new file mode 100644 index 0000000000..236f2468dc --- /dev/null +++ b/arch/arm/dts/meson-g12b-odroid-n2l-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong + */ + +#include "meson-g12-common-u-boot.dtsi" diff --git a/configs/odroid-n2l_defconfig b/configs/odroid-n2l_defconfig new file mode 100644 index 0000000000..7f9e64d942 --- /dev/null +++ b/configs/odroid-n2l_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="w400" +CONFIG_ARCH_MESON=y +CONFIG_TEXT_BASE=0x01000000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2l" +CONFIG_MESON_G12A=y +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" odroid-n2l" +CONFIG_SYS_LOAD_ADDR=0x1000000 +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000 +CONFIG_REMAKE_ELF=y +CONFIG_OF_BOARD_SETUP=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_MISC_INIT_R=y +CONFIG_SYS_MAXARGS=32 +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_ADC=y +CONFIG_SARADC_MESON=y +CONFIG_MMC_MESON_GX=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_VIDEO=y +# CONFIG_VIDEO_BPP8 is not set +# CONFIG_VIDEO_BPP16 is not set +CONFIG_SYS_WHITE_ON_BLACK=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_BMP_16BPP=y +CONFIG_BMP_24BPP=y +CONFIG_BMP_32BPP=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 11443d9f2c..f945f672dd 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -21,6 +21,7 @@ This matrix concerns the actual source code version. | | P201 | LibreTech-AC v2 | | | | GSKing-X | Odroid-HC4 | | | | JetHub J80 | | | | Odroid-Go- | BananaPi-M5 | | | | | | | | Ultra | | +| | | | | | | Odroid-N2L | | +-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | +-------------------------------+-----------+-----------------+--------------+-------------+------------+-------------+--------------+ @@ -106,6 +107,7 @@ Board Documentation odroid-c2 odroid-c4 odroid-n2 + odroid-n2l odroid-go-ultra p200 p201 diff --git a/doc/board/amlogic/odroid-n2l.rst b/doc/board/amlogic/odroid-n2l.rst new file mode 100644 index 0000000000..afd4409d1b --- /dev/null +++ b/doc/board/amlogic/odroid-n2l.rst @@ -0,0 +1,31 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for ODROID-N2L +===================== + +ODROID-N2L is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC + - 4GB DDR4 SDRAM + - HDMI 2.1 4K/60Hz display + - 40-pin GPIO header + - 1 x USB 3.0 Host, 1 x USB USB 2.0 Host + - eMMC, microSD + - MIPI DSI Port + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + +.. code-block:: bash + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-n2l_defconfig + $ make + +Image creation +-------------- + +For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `odroid-n2l`