From: Tudor Ambarus <tudor.ambarus@microchip.com>
Date: Fri, 27 Sep 2019 13:09:07 +0000 (+0000)
Subject: board: sam9x60ek: Add NAND flash support
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8ed15e4a3a0a1cfce08e97904887f7bd6c2fb27b;p=u-boot.git

board: sam9x60ek: Add NAND flash support

- EBI Chip Select Register is now in SFR,
- the pins are set to default values,
- timings are matching MT29F4G08BABWP's nand flash requirements.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---

diff --git a/board/atmel/sam9x60ek/sam9x60ek.c b/board/atmel/sam9x60ek/sam9x60ek.c
index 62938741dd..e352afc67e 100644
--- a/board/atmel/sam9x60ek/sam9x60ek.c
+++ b/board/atmel/sam9x60ek/sam9x60ek.c
@@ -7,8 +7,10 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_sfr.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <debug_uart.h>
@@ -18,6 +20,62 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void at91_prepare_cpu_var(void);
 
+#ifdef CONFIG_CMD_NAND
+static void sam9x60ek_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+	unsigned int csa;
+
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1);	/* NAND OE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1);	/* NAND WE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0);	/* NAND ALE */
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0);	/* NAND CLE */
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
+	at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
+
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+	/* Enable CS3 */
+	csa = readl(&sfr->ebicsa);
+	csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
+
+	/* Configure IO drive */
+	csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
+
+	writel(csa, &sfr->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
+
+	writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
+	       AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
+	       &smc->cs[3].pulse);
+
+	writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+	       &smc->cs[3].cycle);
+
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+	       AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+	       AT91_SMC_MODE_DBW_8 |
+#endif
+	       AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
+	       &smc->cs[3].mode);
+}
+#endif
+
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
@@ -48,6 +106,9 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
+#ifdef CONFIG_CMD_NAND
+	sam9x60ek_nand_hw_init();
+#endif
 	return 0;
 }
 
diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h
index b778bd8e83..dbcbce3a2b 100644
--- a/include/configs/sam9x60ek.h
+++ b/include/configs/sam9x60ek.h
@@ -42,6 +42,26 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
 
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE	BIT(21)
+#define CONFIG_SYS_NAND_MASK_CLE	BIT(22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_MTD_DEVICE
+#endif
+
+/* PMECC & PMERRLOC */
+#define CONFIG_ATMEL_NAND_HWECC
+#define CONFIG_ATMEL_NAND_HW_PMECC
+#define CONFIG_PMECC_CAP		8
+#define CONFIG_PMECC_SECTOR_SIZE	512
+
 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
 
 #ifdef CONFIG_SD_BOOT
@@ -50,6 +70,14 @@
 			"fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \
 			"fatload mmc 0:1 0x22000000 zImage;" \
 			"bootz 0x22000000 - 0x21000000"
+
+#elif defined(CONFIG_NAND_BOOT)
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_OFFSET_REDUND	0x100000
+#define CONFIG_BOOTCOMMAND	"nand read " \
+				"0x22000000 0x200000 0x600000; " \
+				"nand read 0x21000000 0x180000 0x20000; " \
+				"bootz 0x22000000 - 0x21000000"
 #endif
 
 /*