From: Werner Böllmann <Werner.Boellmann@fh-dortmund.de>
Date: Fri, 10 Nov 2017 13:44:20 +0000 (+0530)
Subject: sunxi: SATA link timeout fix
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8e2c2d413c37b7fd13641730b706774c08982f0f;p=u-boot.git

sunxi: SATA link timeout fix

After updating u-boot from v2016.01 to 2017.09, issue with
"SATA link 0 timeout." on my Cubietruck board.

mdelay milled after moving satapwr code to board.
"sunxi: Turn satapwr on from board_init"
(sha1: 9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb)

After adding the "mdelay(500);"
line that was lost in the path the error is gone.

Signed-off-by: Werner Böllmann <Werner.Boellmann@fh-dortmund.de>
[Rebased and updated change and commit message]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
---

diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 6e13ee32c1..dcacdf3e62 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -217,6 +217,8 @@ int board_init(void)
 	satapwr_pin = sunxi_name_to_gpio(CONFIG_SATAPWR);
 	gpio_request(satapwr_pin, "satapwr");
 	gpio_direction_output(satapwr_pin, 1);
+	/* Give attached sata device time to power-up to avoid link timeouts */
+	mdelay(500);
 #endif
 #ifdef CONFIG_MACPWR
 	macpwr_pin = sunxi_name_to_gpio(CONFIG_MACPWR);