From: Stefan Bosch Date: Sat, 23 Jan 2021 12:37:41 +0000 (+0100) Subject: mmc: fix response timeout after switch command X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8e2b0af7216d78b60fccb46a107a4a047938aea9;p=u-boot.git mmc: fix response timeout after switch command After issuing the switch command: Wait until 'current state' of the card status becomes 'tran'. This prevents from response timeout at the next command because of 'current state' = 'data'. Signed-off-by: Stefan Bosch Reviewed-by: Jaehoon Chung --- diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d67af80c01..b4c8e7f293 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -841,7 +841,8 @@ static int __mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value, value); return -EIO; } - if (!ret && (status & MMC_STATUS_RDY_FOR_DATA)) + if (!ret && (status & MMC_STATUS_RDY_FOR_DATA) && + (status & MMC_STATUS_CURR_STATE) == MMC_STATE_TRANS) return 0; udelay(100); } while (get_timer(start) < timeout_ms); diff --git a/include/mmc.h b/include/mmc.h index c12c7a0b5c..effccaaca0 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -178,6 +178,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx) #define MMC_STATUS_ERROR (1 << 19) #define MMC_STATE_PRG (7 << 9) +#define MMC_STATE_TRANS (4 << 9) #define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ #define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */