From: Patrick Delaunay Date: Tue, 28 Jan 2020 09:11:03 +0000 (+0100) Subject: ARM: dts: stm32m1: add reg for pll nodes X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8d93a9755f9648acd8406edc5f5ca9f06ffb0f1c;p=u-boot.git ARM: dts: stm32m1: add reg for pll nodes Fix the following DT dtc warnings for stm32mp1 boards: Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3: node has a unit name, but no reg property Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp157-u-boot.dtsi b/arch/arm/dts/stm32mp157-u-boot.dtsi index cb8d60e33d..8f9535a4db 100644 --- a/arch/arm/dts/stm32mp157-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157-u-boot.dtsi @@ -134,6 +134,8 @@ &rcc { u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <0>; }; &sdmmc1 { diff --git a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi index d8a4617d90..d6dc746365 100644 --- a/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi @@ -105,6 +105,8 @@ /* VCO = 1300.0 MHz => P = 650 (CPU) */ pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; u-boot,dm-pre-reloc; @@ -112,6 +114,8 @@ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; u-boot,dm-pre-reloc; @@ -119,6 +123,8 @@ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; u-boot,dm-pre-reloc; @@ -126,6 +132,8 @@ /* VCO = 480.0 MHz => P = 120, Q = 40, R = 96 */ pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 1 39 3 11 4 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index a7a125c087..a5cc01dd19 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -124,6 +124,8 @@ /* VCO = 1300.0 MHz => P = 650 (CPU) */ pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; u-boot,dm-pre-reloc; @@ -131,6 +133,8 @@ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; u-boot,dm-pre-reloc; @@ -138,6 +142,8 @@ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; u-boot,dm-pre-reloc; @@ -145,6 +151,8 @@ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 3 98 5 7 7 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 32d95b84e7..347edf7e58 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -121,6 +121,8 @@ /* VCO = 1300.0 MHz => P = 650 (CPU) */ pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; u-boot,dm-pre-reloc; @@ -128,6 +130,8 @@ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; u-boot,dm-pre-reloc; @@ -135,6 +139,8 @@ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; u-boot,dm-pre-reloc; @@ -142,6 +148,8 @@ /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 3 98 5 7 7 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi index 21aa4bfb86..6c952a57ee 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi +++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi @@ -156,6 +156,8 @@ /* VCO = 1300.0 MHz => P = 650 (CPU) */ pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; u-boot,dm-pre-reloc; @@ -163,6 +165,8 @@ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; u-boot,dm-pre-reloc; @@ -170,6 +174,8 @@ /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; u-boot,dm-pre-reloc; @@ -177,6 +183,8 @@ /* VCO = 600.0 MHz => P = 50, Q = 50, R = 50 */ pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 1 49 11 11 11 PQR(1,1,1) >; u-boot,dm-pre-reloc; }; diff --git a/doc/device-tree-bindings/clock/st,stm32mp1.txt b/doc/device-tree-bindings/clock/st,stm32mp1.txt index ec1d703f34..a3d427911d 100644 --- a/doc/device-tree-bindings/clock/st,stm32mp1.txt +++ b/doc/device-tree-bindings/clock/st,stm32mp1.txt @@ -12,6 +12,9 @@ describes the fields added for clock tree initialization which are not present in Linux binding for compatible "st,stm32mp1-rcc" defined in st,stm32mp1-rcc.txt file. +This parent node may optionally have additional children nodes which define +specific init values for RCC elements. + The added properties for clock tree initialization are: Required properties: @@ -78,13 +81,16 @@ Required properties: >; Optional Properties: -- st,pll : A specific PLL configuration, including frequency. +- children for a PLL configuration with "st,stm32mp1-pll" compatible - PLL children nodes for PLL1 to PLL4 (see ref manual for details) - are listed with associated index 0 to 3 (st,pll@0 to st,pll@3). - PLLx is off when the associated node is absent. + each PLL children nodes for PLL1 to PLL4 (see ref manual for details) + are listed with associated reg 0 to 3. + PLLx is off when the associated node is absent or deactivated. Here are the available properties for each PLL node: + - compatible: should be "st,stm32mp1-pll" + + - reg: index of the pll instance - cfg: The parameters for PLL configuration in the following order: DIVM DIVN DIVP DIVQ DIVR Output. @@ -118,18 +124,26 @@ Optional Properties: Example: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 1 53 0 0 0 1 >; frac = < 0x810 >; }; st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 1 43 1 0 0 PQR(0,1,1) >; csg = < 10 20 1 >; }; st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 2 85 3 13 3 0 >; csg = < 10 20 SSCG_MODE_CENTER_SPREAD >; }; st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 2 78 4 7 9 3 >; }; @@ -277,6 +291,8 @@ Example of clock tree initialization u-boot,dm-pre-reloc; compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; #clock-cells = <1>; #reset-cells = <1>; interrupts = ; @@ -347,6 +363,8 @@ Example of clock tree initialization /* VCO = 1300.0 MHz => P = 650 (CPU) */ pll1: st,pll@0 { + compatible = "st,stm32mp1-pll"; + reg = <0>; cfg = < 2 80 0 0 0 PQR(1,0,0) >; frac = < 0x800 >; u-boot,dm-pre-reloc; @@ -355,6 +373,8 @@ Example of clock tree initialization /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */ pll2: st,pll@1 { + compatible = "st,stm32mp1-pll"; + reg = <1>; cfg = < 2 65 1 0 0 PQR(1,1,1) >; frac = < 0x1400 >; u-boot,dm-pre-reloc; @@ -362,6 +382,8 @@ Example of clock tree initialization /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */ pll3: st,pll@2 { + compatible = "st,stm32mp1-pll"; + reg = <2>; cfg = < 1 33 1 16 36 PQR(1,1,1) >; frac = < 0x1a04 >; u-boot,dm-pre-reloc; @@ -369,6 +391,8 @@ Example of clock tree initialization /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */ pll4: st,pll@3 { + compatible = "st,stm32mp1-pll"; + reg = <3>; cfg = < 3 98 5 7 7 PQR(1,1,1) >; u-boot,dm-pre-reloc; };