From: Icenowy Zheng Date: Mon, 26 Oct 2020 14:19:34 +0000 (+0800) Subject: sunxi: allow to use AXP20[39] attached to I2C0 on V3 series X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8c51c65273628a3da3c18b258cecb27835e52727;p=u-boot.git sunxi: allow to use AXP20[39] attached to I2C0 on V3 series The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng Reviewed-by: Jagan Teki --- diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index a646ea6a3c..f817d328f4 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -158,6 +158,7 @@ enum sunxi_gpio_number { #define SUN5I_GPB_TWI1 2 #define SUN4I_GPB_TWI2 2 #define SUN5I_GPB_TWI2 2 +#define SUN8I_V3S_GPB_TWI0 2 #define SUN4I_GPB_UART0 2 #define SUN5I_GPB_UART0 2 #define SUN8I_GPB_UART2 2 diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e94139d6a8..708a27ed78 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -102,6 +102,10 @@ void i2c_init_board(void) sunxi_gpio_set_cfgpin(SUNXI_GPH(14), SUN6I_GPH_TWI0); sunxi_gpio_set_cfgpin(SUNXI_GPH(15), SUN6I_GPH_TWI0); clock_twi_onoff(0, 1); +#elif defined(CONFIG_MACH_SUN8I_V3S) + sunxi_gpio_set_cfgpin(SUNXI_GPB(6), SUN8I_V3S_GPB_TWI0); + sunxi_gpio_set_cfgpin(SUNXI_GPB(7), SUN8I_V3S_GPB_TWI0); + clock_twi_onoff(0, 1); #elif defined(CONFIG_MACH_SUN8I) sunxi_gpio_set_cfgpin(SUNXI_GPH(2), SUN8I_GPH_TWI0); sunxi_gpio_set_cfgpin(SUNXI_GPH(3), SUN8I_GPH_TWI0); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 5910926fac..02050f6f35 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -14,7 +14,7 @@ choice default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40 default AXP818_POWER if MACH_SUN8I_A83T - default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I + default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I || MACH_SUN8I_V3S config SUNXI_NO_PMIC bool "board without a pmic" @@ -32,7 +32,7 @@ config AXP152_POWER config AXP209_POWER bool "axp209 pmic support" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_V3S select AXP_PMIC_BUS select CMD_POWEROFF ---help---