From: Svyatoslav Ryhel Date: Tue, 23 Jan 2024 17:16:23 +0000 (+0200) Subject: video: tegra20: dc: configure behavior if PLLD/D2 is used X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8c0eb06fbe2cc9bca76a54c861852165c4888963;p=u-boot.git video: tegra20: dc: configure behavior if PLLD/D2 is used If DISP1 is a PLLD/D2 child, it cannot go over 370MHz. The cause of this is not quite clear. This can be overcomed by further halving the PLLD/D2 if the target parent rate is over 800MHz. This way DISP1 and DSI clocks will have the same frequency. The shift divider in this case has to be calculated from the original PLLD/D2 frequency and is passed from the DSI driver. Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565 Tested-by: Ion Agorria # HTC One X Tested-by: Svyatoslav Ryhel # Nvidia Tegratab T114 Tested-by: Jonas Schwöbel # Microsoft Surface 2 Signed-off-by: Jonas Schwöbel Signed-off-by: Svyatoslav Ryhel Acked-by: Thierry Reding --- diff --git a/drivers/video/tegra20/tegra-dc.c b/drivers/video/tegra20/tegra-dc.c index cc4b5b7001..2c9017807f 100644 --- a/drivers/video/tegra20/tegra-dc.c +++ b/drivers/video/tegra20/tegra-dc.c @@ -46,6 +46,7 @@ struct tegra_lcd_priv { fdt_addr_t frame_buffer; /* Address of frame buffer */ unsigned pixel_clock; /* Pixel clock in Hz */ int dc_clk[2]; /* Contains clk and its parent */ + ulong scdiv; /* Clock divider used by disp_clk_ctrl */ bool rotation; /* 180 degree panel turn */ bool pipe; /* DC controller: 0 for A, 1 for B */ }; @@ -124,8 +125,6 @@ static int update_display_mode(struct tegra_lcd_priv *priv) struct dc_disp_reg *disp = &priv->dc->disp; struct display_timing *dt = &priv->timing; unsigned long val; - unsigned long rate; - unsigned long div; writel(0x0, &disp->disp_timing_opt); @@ -148,21 +147,11 @@ static int update_display_mode(struct tegra_lcd_priv *priv) writel(val, &disp->disp_interface_ctrl); } - /* - * The pixel clock divider is in 7.1 format (where the bottom bit - * represents 0.5). Here we calculate the divider needed to get from - * the display clock (typically 600MHz) to the pixel clock. We round - * up or down as requried. - */ - rate = clock_get_periph_rate(priv->dc_clk[0], priv->dc_clk[1]); - div = ((rate * 2 + priv->pixel_clock / 2) / priv->pixel_clock) - 2; - debug("Display clock %lu, divider %lu\n", rate, div); - if (priv->soc->has_rgb) writel(0x00010001, &disp->shift_clk_opt); val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; - val |= div << SHIFT_CLK_DIVIDER_SHIFT; + val |= priv->scdiv << SHIFT_CLK_DIVIDER_SHIFT; writel(val, &disp->disp_clk_ctrl); return 0; @@ -312,6 +301,17 @@ static int tegra_display_probe(struct tegra_lcd_priv *priv, rate /= 2; #endif + /* + * The pixel clock divider is in 7.1 format (where the bottom bit + * represents 0.5). Here we calculate the divider needed to get from + * the display clock (typically 600MHz) to the pixel clock. We round + * up or down as required. + */ + if (!priv->scdiv) + priv->scdiv = ((rate * 2 + priv->pixel_clock / 2) + / priv->pixel_clock) - 2; + debug("Display clock %lu, divider %lu\n", rate, priv->scdiv); + /* * HOST1X is init by default at 150MHz with PLLC as parent */ @@ -373,6 +373,14 @@ static int tegra_lcd_probe(struct udevice *dev) } } + /* Get shift clock divider from Tegra DSI if used */ + if (!strcmp(priv->panel->name, TEGRA_DSI_A) || + !strcmp(priv->panel->name, TEGRA_DSI_B)) { + struct tegra_dc_plat *dc_plat = dev_get_plat(priv->panel); + + priv->scdiv = dc_plat->scdiv; + } + if (tegra_display_probe(priv, (void *)plat->base)) { debug("%s: Failed to probe display driver\n", __func__); return -1; diff --git a/drivers/video/tegra20/tegra-dc.h b/drivers/video/tegra20/tegra-dc.h index 75fc0fa4de..05042dab1c 100644 --- a/drivers/video/tegra20/tegra-dc.h +++ b/drivers/video/tegra20/tegra-dc.h @@ -23,6 +23,7 @@ struct tegra_dc_plat { struct udevice *dev; /* Display controller device */ struct dc_ctlr *dc; /* Display controller regmap */ bool pipe; /* DC number: 0 for A, 1 for B */ + ulong scdiv; /* Shift clock divider */ }; /* This holds information about a window which can be displayed */ diff --git a/drivers/video/tegra20/tegra-dsi.c b/drivers/video/tegra20/tegra-dsi.c index 72b91ed26b..de225ed376 100644 --- a/drivers/video/tegra20/tegra-dsi.c +++ b/drivers/video/tegra20/tegra-dsi.c @@ -743,6 +743,7 @@ static int tegra_dsi_panel_timings(struct udevice *dev, static void tegra_dsi_init_clocks(struct udevice *dev) { struct tegra_dsi_priv *priv = dev_get_priv(dev); + struct tegra_dc_plat *dc_plat = dev_get_plat(dev); struct mipi_dsi_device *device = &priv->device; unsigned int mul, div; unsigned long bclk, plld; @@ -754,6 +755,19 @@ static void tegra_dsi_init_clocks(struct udevice *dev) plld = DIV_ROUND_UP(bclk * 8, USEC_PER_SEC); + dc_plat->scdiv = ((plld * USEC_PER_SEC + + priv->timing.pixelclock.typ / 2) / + priv->timing.pixelclock.typ) - 2; + + /* + * BUG: If DISP1 is a PLLD/D2 child, it cannot go over 370MHz. The + * cause of this is not quite clear. This can be overcomed by + * halving the PLLD/D2 if the target rate is > 800MHz. This way + * DISP1 and DSI clocks will be equal. + */ + if (plld > 800) + plld /= 2; + switch (clock_get_osc_freq()) { case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */ case CLOCK_OSC_FREQ_48_0: /* OSC is 48Mhz */