From: Xie Xiaobo Date: Mon, 3 Oct 2011 19:18:40 +0000 (-0700) Subject: powerpc/mpc8536ds: Invert SDHC_WP pin polarity X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8af3d22db9aaf1d05cd971940e577d420e9eae6f;p=u-boot.git powerpc/mpc8536ds: Invert SDHC_WP pin polarity MPC8536 Rev 1.0 silicon have NMG_eSDHC118 erratum, so that the SDHC write protected pin polarity does not follow the SD card standard in MPC8536 Rev 1.0 silicon. The MPC8536DS board invert the SDHC_WP pin as a workaround. However, this silicon erratum has been fixed in Rev 1.1, So need invert the SDHC_WP polarity again when use the MPC8536 Rev1.1 and greater on MPC8536DS board. Signed-off-by: Xie Xiaobo Signed-off-by: Kumar Gala --- diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 2beea345c5..c9f85c857b 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -51,6 +51,14 @@ int board_early_init_f (void) setbits_be32(&gur->pmuxcr, (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP)); + + /* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118, + * however, this erratum only applies to MPC8536 Rev1.0. + * So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/ + if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) && + (SVR_MIN(get_svr()) >= 0x1)) + || (SVR_MAJ(get_svr() & 0x7) > 0x1)) + setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV); #endif return 0; }