From: Stephen Warren Date: Thu, 24 Apr 2014 23:52:37 +0000 (-0600) Subject: usb: ci_udc: set ep->req.actual after transfer X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8aac6e9c537a2dd0c76acc3a0768ae7af5e166ab;p=u-boot.git usb: ci_udc: set ep->req.actual after transfer At least drivers/usb/gadget/storage_common.c expects that ep->req.actual contain the number of bytes actually transferred. (At least in practice, I observed it failing to work correctly unless this was the case). However, ci_udc.c modifies ep->req.length instead. I assume that .length is supposed to represent the allocated buffer size, whereas .actual is supposed to represent the actual number of bytes transferred. In the OUT transaction case, this may happen simply because the host sends a smaller packet than the max possible size, which is quite legal. In the IN case, transferring fewer bytes than requested could presumably happen as an error. Modify handle_ep_complete() to write to .actual rather than modifying .length. Signed-off-by: Stephen Warren --- diff --git a/drivers/usb/gadget/ci_udc.c b/drivers/usb/gadget/ci_udc.c index 815ce7b262..832606f5e4 100644 --- a/drivers/usb/gadget/ci_udc.c +++ b/drivers/usb/gadget/ci_udc.c @@ -321,7 +321,7 @@ static void ci_debounce(struct ci_ep *ep, int in) if (addr == ba) return; /* not a bounce */ - memcpy(ep->req.buf, ep->b_buf, ep->req.length); + memcpy(ep->req.buf, ep->b_buf, ep->req.actual); free: /* Large payloads use allocated buffer, free it. */ if (ep->b_buf != ep->b_fast) @@ -388,7 +388,7 @@ static void handle_ep_complete(struct ci_ep *ep) num, in ? "in" : "out", item->info, item->page0); len = (item->info >> 16) & 0x7fff; - ep->req.length -= len; + ep->req.actual = ep->req.length - len; ci_debounce(ep, in); DBG("ept%d %s complete %x\n",