From: Simon Glass Date: Wed, 16 Feb 2011 19:14:33 +0000 (-0800) Subject: Add USB host ethernet adapter support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=89d48367edbc878f86db3008a4107331ef07f578;p=u-boot.git Add USB host ethernet adapter support This adds support for using USB Ethernet dongles in host mode. This is just the framework - drivers will come later. A new config option called CONFIG_USB_HOST_ETHER can be defined in board config files to switch this on. The was originally written by NVIDIA and was cleaned up for release by the Chromium authors. Signed-off-by: Simon Glass --- diff --git a/Makefile b/Makefile index 6133160409..dc2e3d8b31 100644 --- a/Makefile +++ b/Makefile @@ -235,6 +235,7 @@ endif LIBS += drivers/rtc/librtc.o LIBS += drivers/serial/libserial.o LIBS += drivers/twserial/libtws.o +LIBS += drivers/usb/eth/libusb_eth.a LIBS += drivers/usb/gadget/libusb_gadget.o LIBS += drivers/usb/host/libusb_host.o LIBS += drivers/usb/musb/libusb_musb.o diff --git a/common/cmd_usb.c b/common/cmd_usb.c index b04a8df764..b5731a7bb8 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -34,6 +34,9 @@ #ifdef CONFIG_USB_STORAGE static int usb_stor_curr_dev = -1; /* current device */ #endif +#ifdef CONFIG_USB_HOST_ETHER +static int usb_ether_curr_dev = -1; /* current ethernet device */ +#endif /* some display routines (info command) */ char *usb_get_class_desc(unsigned char dclass) @@ -522,11 +525,16 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) usb_stop(); printf("(Re)start USB...\n"); i = usb_init(); + if (i >= 0) { #ifdef CONFIG_USB_STORAGE - /* try to recognize storage devices immediately */ - if (i >= 0) + /* try to recognize storage devices immediately */ usb_stor_curr_dev = usb_stor_scan(1); #endif +#ifdef CONFIG_USB_HOST_ETHER + /* try to recognize ethernet devices immediately */ + usb_ether_curr_dev = usb_host_eth_scan(1); +#endif + } return 0; } if (strncmp(argv[1], "stop", 4) == 0) { diff --git a/common/usb.c b/common/usb.c index 44a435af6e..4f7c520b34 100644 --- a/common/usb.c +++ b/common/usb.c @@ -145,10 +145,14 @@ int usb_stop(void) /* * disables the asynch behaviour of the control message. This is used for data * transfers that uses the exclusiv access to the control and bulk messages. + * Returns the old value so it can be restored later. */ -void usb_disable_asynch(int disable) +int usb_disable_asynch(int disable) { + int old_value = asynch_allowed; + asynch_allowed = !disable; + return old_value; } diff --git a/doc/README.usb b/doc/README.usb index b3bcb91f40..9aa4f62ddf 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -28,7 +28,8 @@ USB Support for PIP405 and MIP405 (UHCI) The USB support is implemented on the base of the UHCI Host controller. -Currently supported are USB Hubs, USB Keyboards and USB Floppys. +Currently supported are USB Hubs, USB Keyboards, USB Floppys, USB +flash sticks and USB network adaptors. Tested with a TEAC Floppy TEAC FD-05PUB and Chicony KU-8933 Keyboard. How it works: @@ -78,3 +79,4 @@ CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if using CONFIG_CMD_USB CONFIG_USB_KEYBOARD enables the USB Keyboard CONFIG_USB_STORAGE enables the USB storage devices +CONFIG_USB_HOST_ETHER enables USB ethernet dongle support diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile new file mode 100644 index 0000000000..a0f56765b3 --- /dev/null +++ b/drivers/usb/eth/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (c) 2011 The Chromium OS Authors. +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libusb_eth.a + +# new USB host ethernet layer dependencies +COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c new file mode 100644 index 0000000000..c2342ed97f --- /dev/null +++ b/drivers/usb/eth/usb_ether.c @@ -0,0 +1,143 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#include "usb_ether.h" + +typedef void (*usb_eth_before_probe)(void); +typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss); +typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *dev_desc); + +struct usb_eth_prob_dev { + usb_eth_before_probe before_probe; /* optional */ + usb_eth_probe probe; + usb_eth_get_info get_info; +}; + +/* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */ +static const struct usb_eth_prob_dev prob_dev[] = { + { }, /* END */ +}; + +static int usb_max_eth_dev; /* number of highest available usb eth device */ +static struct ueth_data usb_eth[USB_MAX_ETH_DEV]; + +/******************************************************************************* + * tell if current ethernet device is a usb dongle + */ +int is_eth_dev_on_usb_host(void) +{ + int i; + struct eth_device *dev = eth_get_dev(); + + if (dev) { + for (i = 0; i < usb_max_eth_dev; i++) + if (&usb_eth[i].eth_dev == dev) + return 1; + } + return 0; +} + +/* + * Given a USB device, ask each driver if it can support it, and attach it + * to the first driver that says 'yes' + */ +static void probe_valid_drivers(struct usb_device *dev) +{ + int j; + + for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) { + if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev])) + continue; + /* + * ok, it is a supported eth device. Get info and fill it in + */ + if (prob_dev[j].get_info(dev, + &usb_eth[usb_max_eth_dev], + &usb_eth[usb_max_eth_dev].eth_dev)) { + /* found proper driver */ + /* register with networking stack */ + usb_max_eth_dev++; + + /* + * usb_max_eth_dev must be incremented prior to this + * call since eth_current_changed (internally called) + * relies on it + */ + eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev); + break; + } + } + } + +/******************************************************************************* + * scan the usb and reports device info + * to the user if mode = 1 + * returns current device or -1 if no + */ +int usb_host_eth_scan(int mode) +{ + int i, old_async; + struct usb_device *dev; + + + if (mode == 1) + printf(" scanning bus for ethernet devices... "); + + old_async = usb_disable_asynch(1); /* asynch transfer not allowed */ + + for (i = 0; i < USB_MAX_ETH_DEV; i++) + memset(&usb_eth[i], 0, sizeof(usb_eth[i])); + + for (i = 0; prob_dev[i].probe; i++) { + if (prob_dev[i].before_probe) + prob_dev[i].before_probe(); + } + + usb_max_eth_dev = 0; + for (i = 0; i < USB_MAX_DEVICE; i++) { + dev = usb_get_dev_index(i); /* get device */ + debug("i=%d\n", i); + if (dev == NULL) + break; /* no more devices avaiable */ + + /* find valid usb_ether driver for this device, if any */ + probe_valid_drivers(dev); + + /* check limit */ + if (usb_max_eth_dev == USB_MAX_ETH_DEV) { + printf("max USB Ethernet Device reached: %d stopping\n", + usb_max_eth_dev); + break; + } + } /* for */ + + usb_disable_asynch(old_async); /* restore asynch value */ + printf("%d Ethernet Device(s) found\n", usb_max_eth_dev); + if (usb_max_eth_dev > 0) + return 0; + return -1; +} + diff --git a/include/usb.h b/include/usb.h index 98576b73a4..53603a5582 100644 --- a/include/usb.h +++ b/include/usb.h @@ -168,6 +168,13 @@ int usb_stor_info(void); #endif +#ifdef CONFIG_USB_HOST_ETHER + +#define USB_MAX_ETH_DEV 5 +int usb_host_eth_scan(int mode); + +#endif + #ifdef CONFIG_USB_KEYBOARD int drv_usb_kbd_init(void); @@ -191,7 +198,7 @@ int usb_bulk_msg(struct usb_device *dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout); int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); -void usb_disable_asynch(int disable); +int usb_disable_asynch(int disable); int usb_maxpacket(struct usb_device *dev, unsigned long pipe); inline void wait_ms(unsigned long ms); int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, diff --git a/include/usb_ether.h b/include/usb_ether.h new file mode 100644 index 0000000000..31cbc8d587 --- /dev/null +++ b/include/usb_ether.h @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __USB_ETHER_H__ +#define __USB_ETHER_H__ + +#include + +/* + * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble + * and FCS/CRC (frame check sequence). + */ +#define ETH_ALEN 6 /* Octets in one ethernet addr */ +#define ETH_HLEN 14 /* Total octets in header. */ +#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ +#define ETH_DATA_LEN 1500 /* Max. octets in payload */ +#define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + +struct ueth_data { + /* eth info */ + struct eth_device eth_dev; /* used with eth_register */ + int phy_id; /* mii phy id */ + + /* usb info */ + struct usb_device *pusb_dev; /* this usb_device */ + unsigned char ifnum; /* interface number */ + unsigned char ep_in; /* in endpoint */ + unsigned char ep_out; /* out ....... */ + unsigned char ep_int; /* interrupt . */ + unsigned char subclass; /* as in overview */ + unsigned char protocol; /* .............. */ + unsigned char irqinterval; /* Intervall for IRQ Pipe */ + + /* private fields for each driver can go here if needed */ +}; + +/* + * Function definitions for each USB ethernet driver go here, bracketed by + * #ifdef CONFIG_USB_ETHER_xxx...#endif + */ + +#endif /* __USB_ETHER_H__ */ diff --git a/net/eth.c b/net/eth.c index 6082c90072..cec0387891 100644 --- a/net/eth.c +++ b/net/eth.c @@ -166,20 +166,33 @@ int eth_get_dev_index (void) return (0); } -int eth_register(struct eth_device* dev) +static void eth_current_changed(void) { - struct eth_device *d; - - if (!eth_devices) { - eth_current = eth_devices = dev; #ifdef CONFIG_NET_MULTI + { + char *act = getenv("ethact"); /* update current ethernet name */ + if (eth_current) { - char *act = getenv("ethact"); if (act == NULL || strcmp(act, eth_current->name) != 0) setenv("ethact", eth_current->name); } + /* + * remove the variable completely if there is no active + * interface + */ + else if (act != NULL) + setenv("ethact", NULL); + } #endif +} + +int eth_register(struct eth_device *dev) +{ + struct eth_device *d; + if (!eth_devices) { + eth_current = eth_devices = dev; + eth_current_changed(); } else { for (d=eth_devices; d->next!=eth_devices; d=d->next) ; @@ -271,14 +284,7 @@ int eth_initialize(bd_t *bis) dev = dev->next; } while(dev != eth_devices); - /* update current ethernet name */ - if (eth_current) { - char *act = getenv("ethact"); - if (act == NULL || strcmp(act, eth_current->name) != 0) - setenv("ethact", eth_current->name); - } else - setenv("ethact", NULL); - + eth_current_changed(); putc ('\n'); } @@ -466,10 +472,7 @@ void eth_try_another(int first_restart) eth_current = eth_current->next; - /* update current ethernet name */ - act = getenv("ethact"); - if (act == NULL || strcmp(act, eth_current->name) != 0) - setenv("ethact", eth_current->name); + eth_current_changed(); if (first_failed == eth_current) { NetRestartWrap = 1; @@ -500,7 +503,7 @@ void eth_set_current(void) } while (old_current != eth_current); } - setenv("ethact", eth_current->name); + eth_current_changed(); } char *eth_get_name (void)