From: Masahiro Yamada <yamada.masahiro@socionext.com>
Date: Fri, 18 Dec 2015 05:52:32 +0000 (+0900)
Subject: ARM: uniphier: allow to run zImage rather than uImage
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=89835b3557fe33621dd0d911b9a50f1ebf3aee43;p=u-boot.git

ARM: uniphier: allow to run zImage rather than uImage

UniPhier SoC family adopt ARM Multi-platform in Linux since the first
upstreaming.  Because CONFIG_ARM_PATCH_PHYS_VIRT is defined, the
kernel image is completely position-independent.  There is no reason
to decide the load address on compile time, but it is up to the boot
loader.  Now, zImage is handier than uImage, also it allows to skip
the relocation of the kernel image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index b1106deef0..463c6871c0 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -188,13 +188,14 @@
 	"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
 		"bootm $fit_addr_r\0"
 #else
-#define CONFIG_BOOTFILE			"uImage"
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTFILE			"zImage"
 #define LINUXBOOT_ENV_SETTINGS \
 	"fdt_addr=0x00100000\0" \
 	"fdt_addr_r=0x84100000\0" \
 	"fdt_size=0x00008000\0" \
 	"kernel_addr=0x00200000\0" \
-	"kernel_addr_r=0x84200000\0" \
+	"kernel_addr_r=0x80208000\0" \
 	"kernel_size=0x00800000\0" \
 	"ramdisk_addr=0x00a00000\0" \
 	"ramdisk_addr_r=0x84a00000\0" \
@@ -203,15 +204,15 @@
 	"norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
 		"setexpr ramdisk_addr $nor_base + $ramdisk_addr &&" \
 		"setexpr fdt_addr $nor_base + $fdt_addr &&" \
-		"bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
+		"bootz $kernel_addr $ramdisk_addr $fdt_addr\0" \
 	"nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
 		"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
 		"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
-		"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
+		"bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
 	"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
 		"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
 		"tftpboot $fdt_addr_r $fdt_file &&" \
-		"bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
+		"bootz $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
 #endif
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\