From: Simon Glass Date: Mon, 24 Jul 2017 03:19:42 +0000 (-0600) Subject: Convert CONFIG_ENV_IS_IN_NVRAM to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=88b233a347378dc51113e9ef7ffe62723c9b7758;p=u-boot.git Convert CONFIG_ENV_IS_IN_NVRAM to Kconfig This converts the following to Kconfig: CONFIG_ENV_IS_IN_NVRAM Signed-off-by: Simon Glass --- diff --git a/README b/README index dc10e4e494..f37765e51c 100644 --- a/README +++ b/README @@ -3412,20 +3412,6 @@ following configurations: Builds up envcrc with the target environment so that external utils may easily extract it and embed it in final U-Boot images. -- CONFIG_ENV_IS_IN_NVRAM: - - Define this if you have some non-volatile memory device - (NVRAM, battery buffered SRAM) which you want to use for the - environment. - - - CONFIG_ENV_ADDR: - - CONFIG_ENV_SIZE: - - These two #defines are used to determine the memory area you - want to use for environment. It is assumed that this memory - can just be read and written to, without any special - provision. - BE CAREFUL! The first access to the environment happens quite early in U-Boot initialization (when we try to get the setting of for the console baudrate). You *MUST* have mapped your NVRAM area then, or diff --git a/common/Kconfig b/common/Kconfig index 29e25fef2f..2f86e7ca90 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -340,6 +340,22 @@ config ENV_IS_IN_NAND Currently, CONFIG_ENV_OFFSET_REDUND is not supported when using CONFIG_ENV_OFFSET_OOB. +config ENV_IS_IN_NVRAM + bool "Environment in a non-volatile RAM" + depends on !CHAIN_OF_TRUST + help + Define this if you have some non-volatile memory device + (NVRAM, battery buffered SRAM) which you want to use for the + environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines are used to determine the memory area you + want to use for environment. It is assumed that this memory + can just be read and written to, without any special + provision. + config ENV_IS_IN_UBI bool "Environment in a UBI volume" depends on !CHAIN_OF_TRUST diff --git a/configs/highbank_defconfig b/configs/highbank_defconfig index 6f19492251..d905b0f32b 100644 --- a/configs/highbank_defconfig +++ b/configs/highbank_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_HIGHBANK=y CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y +CONFIG_ENV_IS_IN_NVRAM=y # CONFIG_DISPLAY_CPUINFO is not set # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -23,6 +24,6 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set -CONFIG_SCSI=y # CONFIG_MMC is not set +CONFIG_SCSI=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 0eb56c07b4..f55843a8f4 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -272,7 +272,6 @@ * Environment is embedded in u-boot in the second sector of the flash */ #if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ -#define CONFIG_ENV_IS_IN_MRAM 1 #define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ #define CONFIG_ENV_SIZE 0x1000 #endif diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 533d3e3f82..0328c4100b 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -74,7 +74,6 @@ /* Environment data setup */ -#define CONFIG_ENV_IS_IN_NVRAM #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */ #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */ #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 2c7ea85618..e4d434b73b 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -636,8 +636,6 @@ CONFIG_ENV_IS_IN_ CONFIG_ENV_IS_IN_DATAFLASH CONFIG_ENV_IS_IN_EEPROM CONFIG_ENV_IS_IN_FAT -CONFIG_ENV_IS_IN_MRAM -CONFIG_ENV_IS_IN_NVRAM CONFIG_ENV_IS_IN_ONENAND CONFIG_ENV_IS_IN_REMOTE CONFIG_ENV_IS_IN_SPI_FLASH