From: Bin Meng Date: Thu, 18 Jul 2019 07:34:08 +0000 (-0700) Subject: doc: board: Add Intel Cougar Canyon 2 board doc X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=87fdda62cd15c9231b3b7c1da7f9c333497ae17e;p=u-boot.git doc: board: Add Intel Cougar Canyon 2 board doc This extracts Intel Cougar Canyon 2 board specific information from README.x86, converts plain text documentation to reST format and adds it to Sphinx TOC tree. No essential content change. Signed-off-by: Bin Meng --- diff --git a/doc/README.x86 b/doc/README.x86 index 8e549c3313..5e85b57665 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -203,29 +203,6 @@ Flash map for samus / broadwell: --- -Intel Cougar Canyon 2 specific instructions for bare mode: - -This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors -with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP -website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the -time of writing) in the board directory and rename it to fsp.bin. - -Now build U-Boot and obtain u-boot.rom - -$ make cougarcanyon2_defconfig -$ make all - -The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in -the board manual. The SPI-0 flash should have flash descriptor plus ME firmware -and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0 -flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program -this image to the SPI-0 flash according to the board manual just once and we are -all set. For programming U-Boot we just need to program SPI-1 flash. Since the -default u-boot.rom image for this board is set to 2MB, it should be programmed -to the last 2MB of the 8MB chip, address range [600000, 7FFFFF]. - ---- - Intel Galileo instructions for bare mode: Only one binary blob is needed for Remote Management Unit (RMU) within Intel diff --git a/doc/board/intel/cougarcanyon2.rst b/doc/board/intel/cougarcanyon2.rst new file mode 100644 index 0000000000..5e3e7a1820 --- /dev/null +++ b/doc/board/intel/cougarcanyon2.rst @@ -0,0 +1,24 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Bin Meng + +Cougar Canyon 2 CRB +=================== + +This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors +with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP +website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the +time of writing) in the board directory and rename it to fsp.bin. + +Now build U-Boot and obtain u-boot.rom:: + + $ make cougarcanyon2_defconfig + $ make all + +The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in +the board manual. The SPI-0 flash should have flash descriptor plus ME firmware +and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0 +flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program +this image to the SPI-0 flash according to the board manual just once and we are +all set. For programming U-Boot we just need to program SPI-1 flash. Since the +default u-boot.rom image for this board is set to 2MB, it should be programmed +to the last 2MB of the 8MB chip, address range [600000, 7FFFFF]. diff --git a/doc/board/intel/index.rst b/doc/board/intel/index.rst index d30debb7f0..521e6e6baa 100644 --- a/doc/board/intel/index.rst +++ b/doc/board/intel/index.rst @@ -8,5 +8,6 @@ Intel bayleybay cherryhill + cougarcanyon2 crownbay minnowmax