From: Weijie Gao <weijie.gao@mediatek.com>
Date: Mon, 22 Jan 2024 02:08:11 +0000 (+0800)
Subject: net: mediatek: add support for adjusting MDIO clock
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=85d1968e759f603e00f04412db75804a3307496a;p=u-boot.git

net: mediatek: add support for adjusting MDIO clock

User can assign a specific MDC speed to the eth node as follow:

&eth {
	...
	phy-mode = "usxgmii";
	phy-handle = <&phy8>;

	mdio {
		clock-frequency = <10500000>;
	};

	phy8: eth-phy@8 {
	      compatible = "ethernet-phy-id31c3.1c12";
	...
};

Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
---

diff --git a/drivers/net/mtk_eth.c b/drivers/net/mtk_eth.c
index 3cfce05845..726aedad3f 100644
--- a/drivers/net/mtk_eth.c
+++ b/drivers/net/mtk_eth.c
@@ -137,6 +137,7 @@ struct mtk_eth_priv {
 	int force_mode;
 	int speed;
 	int duplex;
+	int mdc;
 	bool pn_swap;
 
 	struct phy_device *phydev;
@@ -1607,6 +1608,26 @@ static void mtk_eth_fifo_init(struct mtk_eth_priv *priv)
 	mtk_pdma_write(priv, PDMA_RST_IDX_REG, RST_DTX_IDX0 | RST_DRX_IDX0);
 }
 
+static void mtk_eth_mdc_init(struct mtk_eth_priv *priv)
+{
+	u32 divider;
+
+	if (priv->mdc == 0)
+		return;
+
+	divider = min_t(u32, DIV_ROUND_UP(MDC_MAX_FREQ, priv->mdc), MDC_MAX_DIVIDER);
+
+	/* Configure MDC turbo mode */
+	if (MTK_HAS_CAPS(priv->soc->caps, MTK_NETSYS_V3))
+		mtk_gmac_rmw(priv, GMAC_MAC_MISC_REG, 0, MISC_MDC_TURBO);
+	else
+		mtk_gmac_rmw(priv, GMAC_PPSC_REG, 0, MISC_MDC_TURBO);
+
+	/* Configure MDC divider */
+	mtk_gmac_rmw(priv, GMAC_PPSC_REG, PHY_MDC_CFG,
+		     FIELD_PREP(PHY_MDC_CFG, divider));
+}
+
 static int mtk_eth_start(struct udevice *dev)
 {
 	struct mtk_eth_priv *priv = dev_get_priv(dev);
@@ -1803,6 +1824,9 @@ static int mtk_eth_probe(struct udevice *dev)
 		noncached_alloc(priv->soc->rxd_size * NUM_RX_DESC,
 				ARCH_DMA_MINALIGN);
 
+	/* Set MDC divider */
+	mtk_eth_mdc_init(priv);
+
 	/* Set MAC mode */
 	if (priv->phy_interface == PHY_INTERFACE_MODE_USXGMII)
 		mtk_xmac_init(priv);
@@ -1881,6 +1905,17 @@ static int mtk_eth_of_to_plat(struct udevice *dev)
 
 	priv->gmac_id = dev_read_u32_default(dev, "mediatek,gmac-id", 0);
 
+	priv->mdc = 0;
+	subnode = ofnode_find_subnode(dev_ofnode(dev), "mdio");
+	if (ofnode_valid(subnode)) {
+		priv->mdc = ofnode_read_u32_default(subnode, "clock-frequency", 2500000);
+		if (priv->mdc > MDC_MAX_FREQ ||
+		    priv->mdc < MDC_MAX_FREQ / MDC_MAX_DIVIDER) {
+			printf("error: MDIO clock frequency out of range\n");
+			return -EINVAL;
+		}
+	}
+
 	/* Interface mode is required */
 	pdata->phy_interface = dev_read_phy_mode(dev);
 	priv->phy_interface = pdata->phy_interface;
diff --git a/drivers/net/mtk_eth.h b/drivers/net/mtk_eth.h
index 491cac56a8..45229c0f9a 100644
--- a/drivers/net/mtk_eth.h
+++ b/drivers/net/mtk_eth.h
@@ -180,6 +180,12 @@ enum mkt_eth_capabilities {
 
 /* GMAC Registers */
 
+#define GMAC_PPSC_REG			0x0000
+#define PHY_MDC_CFG			GENMASK(29, 24)
+#define MDC_TURBO			BIT(20)
+#define MDC_MAX_FREQ			25000000
+#define MDC_MAX_DIVIDER			63
+
 #define GMAC_PIAC_REG			0x0004
 #define PHY_ACS_ST			BIT(31)
 #define MDIO_REG_ADDR_S			25
@@ -197,6 +203,7 @@ enum mkt_eth_capabilities {
 #define P1_XGMAC_FORCE_LINK		BIT(15)
 
 #define GMAC_MAC_MISC_REG		0x0010
+#define MISC_MDC_TURBO			BIT(4)
 
 #define GMAC_GSW_CFG_REG		0x0080
 #define GSWTX_IPG_M			0xF0000