From: Tim Harvey Date: Tue, 8 Mar 2022 00:24:04 +0000 (-0800) Subject: drivers: misc: add Gateworks System Controller driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8479b9e6c9db6dc0971283c35d59ab07b289be52;p=u-boot.git drivers: misc: add Gateworks System Controller driver Add a driver for the Gateworks System Controller used on Gateworks boards which provides a boot watchdog, power control, temperature monitor, and voltage ADCs. Signed-off-by: Tim Harvey --- diff --git a/MAINTAINERS b/MAINTAINERS index cf060da4f2..bde298c048 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -882,6 +882,12 @@ T: git https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq.git F: drivers/watchdog/sp805_wdt.c F: drivers/watchdog/sbsa_gwdt.c +GATEWORKS_SC +M: Tim Harvey +S: Maintained +F: drivers/misc/gsc.c +F: include/gsc.h + I2C M: Heiko Schocher S: Maintained diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 7029bb7b5c..10fd601278 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -46,6 +46,14 @@ config ATSHA204A CryptoAuthentication module found for example on the Turris Omnia board. +config GATEWORKS_SC + bool "Gateworks System Controller Support" + depends on MISC + help + Enable access for the Gateworks System Controller used on Gateworks + boards to provide a boot watchdog, power control, temperature monitor, + voltage ADCs, and EEPROM. + config ROCKCHIP_EFUSE bool "Rockchip e-fuse support" depends on MISC diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index f22eff601a..6150d01e88 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_FSL_IIM) += fsl_iim.o obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o obj-$(CONFIG_$(SPL_)FS_LOADER) += fs_loader.o +obj-$(CONFIG_GATEWORKS_SC) += gsc.o obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o diff --git a/drivers/misc/gsc.c b/drivers/misc/gsc.c new file mode 100644 index 0000000000..ec24ca807b --- /dev/null +++ b/drivers/misc/gsc.c @@ -0,0 +1,633 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2022 Gateworks Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GSC_BUSNO 0 +#define GSC_SC_ADDR 0x20 +#define GSC_HWMON_ADDR 0x29 +#define GSC_RTC_ADDR 0x68 + +/* System Controller registers */ +enum { + GSC_SC_CTRL0 = 0, + GSC_SC_CTRL1 = 1, + GSC_SC_TIME = 2, + GSC_SC_TIME_ADD = 6, + GSC_SC_STATUS = 10, + GSC_SC_FWCRC = 12, + GSC_SC_FWVER = 14, + GSC_SC_WP = 15, + GSC_SC_RST_CAUSE = 16, + GSC_SC_THERM_PROTECT = 19, +}; + +/* System Controller Control1 bits */ +enum { + GSC_SC_CTRL1_SLEEP_EN = 0, /* 1 = enable sleep */ + GSC_SC_CTRL1_SLEEP_ACTIVATE = 1, /* 1 = activate sleep */ + GSC_SC_CTRL1_SLEEP_ADD = 2, /* 1 = latch and add sleep time */ + GSC_SC_CTRL1_SLEEP_NOWAKEPB = 3, /* 1 = do not wake on sleep on button press */ + GSC_SC_CTRL1_WDTIME = 4, /* 1 = 60s timeout, 0 = 30s timeout */ + GSC_SC_CTRL1_WDEN = 5, /* 1 = enable, 0 = disable */ + GSC_SC_CTRL1_BOOT_CHK = 6, /* 1 = enable alt boot check */ + GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable boot watchdog */ +}; + +/* System Controller Interrupt bits */ +enum { + GSC_SC_IRQ_PB = 0, /* Pushbutton switch */ + GSC_SC_IRQ_SECURE = 1, /* Secure Key erase operation complete */ + GSC_SC_IRQ_EEPROM_WP = 2, /* EEPROM write violation */ + GSC_SC_IRQ_GPIO = 4, /* GPIO change */ + GSC_SC_IRQ_TAMPER = 5, /* Tamper detect */ + GSC_SC_IRQ_WATCHDOG = 6, /* Watchdog trip */ + GSC_SC_IRQ_PBLONG = 7, /* Pushbutton long hold */ +}; + +/* System Controller WP bits */ +enum { + GSC_SC_WP_ALL = 0, /* Write Protect All EEPROM regions */ + GSC_SC_WP_BOARDINFO = 1, /* Write Protect Board Info region */ +}; + +/* System Controller Reset Cause */ +enum { + GSC_SC_RST_CAUSE_VIN = 0, + GSC_SC_RST_CAUSE_PB = 1, + GSC_SC_RST_CAUSE_WDT = 2, + GSC_SC_RST_CAUSE_CPU = 3, + GSC_SC_RST_CAUSE_TEMP_LOCAL = 4, + GSC_SC_RST_CAUSE_TEMP_REMOTE = 5, + GSC_SC_RST_CAUSE_SLEEP = 6, + GSC_SC_RST_CAUSE_BOOT_WDT = 7, + GSC_SC_RST_CAUSE_BOOT_WDT_MAN = 8, + GSC_SC_RST_CAUSE_SOFT_PWR = 9, + GSC_SC_RST_CAUSE_MAX = 10, +}; + +#if (IS_ENABLED(CONFIG_DM_I2C)) + +struct gsc_priv { + int gscver; + int fwver; + int fwcrc; + struct udevice *hwmon; + struct udevice *rtc; +}; + +/* + * GSCv2 will fail to ACK an I2C transaction if it is busy, which can occur + * during its 1HZ timer tick while reading ADC's. When this does occur, + * it will never be busy longer than 2 back-to-back transfers so retry 3 times. + */ +static int gsc_i2c_read(struct udevice *dev, uint addr, u8 *buf, int len) +{ + struct gsc_priv *priv = dev_get_priv(dev); + int retry = (priv->gscver == 3) ? 1 : 3; + int n = 0; + int ret; + + while (n++ < retry) { + ret = dm_i2c_read(dev, addr, buf, len); + if (!ret) + break; + if (ret != -EREMOTEIO) + break; + mdelay(10); + } + return ret; +} + +static int gsc_i2c_write(struct udevice *dev, uint addr, const u8 *buf, int len) +{ + struct gsc_priv *priv = dev_get_priv(dev); + int retry = (priv->gscver == 3) ? 1 : 3; + int n = 0; + int ret; + + while (n++ < retry) { + ret = dm_i2c_write(dev, addr, buf, len); + if (!ret) + break; + if (ret != -EREMOTEIO) + break; + mdelay(10); + } + return ret; +} + +static struct udevice *gsc_get_dev(int busno, int slave) +{ + struct udevice *dev, *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus); + if (ret) + return NULL; + ret = dm_i2c_probe(bus, slave, 0, &dev); + if (ret) + return NULL; + + return dev; +} + +static int gsc_thermal_get_info(struct udevice *dev, u8 *outreg, int *tmax, bool *enable) +{ + struct gsc_priv *priv = dev_get_priv(dev); + int ret; + u8 reg; + + if (priv->gscver > 2 && priv->fwver > 52) { + ret = gsc_i2c_read(dev, GSC_SC_THERM_PROTECT, ®, 1); + if (!ret) { + if (outreg) + *outreg = reg; + if (tmax) { + *tmax = ((reg & 0xf8) >> 3) * 2; + if (*tmax) + *tmax += 70; + else + *tmax = 120; + } + if (enable) + *enable = reg & 1; + } + } else { + ret = -ENODEV; + } + + return ret; +} + +static int gsc_thermal_get_temp(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + u32 reg, mode, val; + const char *label; + ofnode node; + u8 buf[2]; + + ofnode_for_each_subnode(node, dev_read_subnode(dev, "adc")) { + if (ofnode_read_u32(node, "reg", ®)) + reg = -1; + if (ofnode_read_u32(node, "gw,mode", &mode)) + mode = -1; + label = ofnode_read_string(node, "label"); + + if ((reg == -1) || (mode == -1) || !label) + continue; + + if (mode != 0 || strcmp(label, "temp")) + continue; + + memset(buf, 0, sizeof(buf)); + if (!gsc_i2c_read(priv->hwmon, reg, buf, sizeof(buf))) { + val = buf[0] | buf[1] << 8; + if (val > 0x8000) + val -= 0xffff; + return val; + } + } + + return 0; +} + +static void gsc_thermal_info(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + + switch (priv->gscver) { + case 2: + printf("board_temp:%dC ", gsc_thermal_get_temp(dev) / 10); + break; + case 3: + if (priv->fwver > 52) { + bool enabled; + int tmax; + + if (!gsc_thermal_get_info(dev, NULL, &tmax, &enabled)) { + puts("Thermal protection:"); + if (enabled) + printf("enabled at %dC ", tmax); + else + puts("disabled "); + } + } + break; + } +} + +static void gsc_reset_info(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + static const char * const names[] = { + "VIN", + "PB", + "WDT", + "CPU", + "TEMP_L", + "TEMP_R", + "SLEEP", + "BOOT_WDT1", + "BOOT_WDT2", + "SOFT_PWR", + }; + u8 reg; + + /* reset cause */ + switch (priv->gscver) { + case 2: + if (!gsc_i2c_read(dev, GSC_SC_STATUS, ®, 1)) { + if (reg & BIT(GSC_SC_IRQ_WATCHDOG)) { + puts("RST:WDT"); + reg &= ~BIT(GSC_SC_IRQ_WATCHDOG); + gsc_i2c_write(dev, GSC_SC_STATUS, ®, 1); + } else { + puts("RST:VIN"); + } + printf(" WDT:%sabled ", + (reg & BIT(GSC_SC_CTRL1_WDEN)) ? "en" : "dis"); + } + break; + case 3: + if (priv->fwver > 52 && + !gsc_i2c_read(dev, GSC_SC_RST_CAUSE, ®, 1)) { + puts("RST:"); + if (reg < ARRAY_SIZE(names)) + printf("%s ", names[reg]); + else + printf("0x%02x ", reg); + } + break; + } +} + +/* display hardware monitor ADC channels */ +static int gsc_hwmon(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + u32 reg, mode, val, offset; + const char *label; + ofnode node; + u8 buf[2]; + u32 r[2]; + int ret; + + /* iterate over hwmon nodes */ + ofnode_for_each_subnode(node, dev_read_subnode(dev, "adc")) { + if (ofnode_read_u32(node, "reg", ®)) + reg = -1; + if (ofnode_read_u32(node, "gw,mode", &mode)) + mode = -1; + label = ofnode_read_string(node, "label"); + if ((reg == -1) || (mode == -1) || !label) + continue; + + memset(buf, 0, sizeof(buf)); + ret = gsc_i2c_read(priv->hwmon, reg, buf, sizeof(buf)); + if (ret) { + printf("i2c error: %d\n", ret); + continue; + } + val = buf[0] | buf[1] << 8; + + switch (mode) { + case 0: /* temperature (C*10) */ + if (val > 0x8000) + val -= 0xffff; + printf("%-8s: %d.%ldC\n", label, val / 10, abs(val % 10)); + break; + case 1: /* prescaled voltage */ + if (val != 0xffff) + printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000); + break; + case 2: /* scaled based on ref volt and resolution */ + val *= 2500; + val /= 1 << 12; + + /* apply pre-scaler voltage divider */ + if (!ofnode_read_u32_index(node, "gw,voltage-divider-ohms", 0, &r[0]) && + !ofnode_read_u32_index(node, "gw,voltage-divider-ohms", 1, &r[1]) && + r[0] && r[1]) { + val *= (r[0] + r[1]); + val /= r[1]; + } + + /* adjust by offset */ + val += (offset / 1000); + + printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000); + break; + } + } + + return 0; +} + +static int gsc_banner(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + + /* banner */ + printf("GSCv%d : v%d 0x%04x ", priv->gscver, priv->fwver, priv->fwcrc); + gsc_reset_info(dev); + gsc_thermal_info(dev); + puts("\n"); + + /* Display RTC */ + if (priv->rtc) { + u8 buf[4]; + time_t timestamp; + struct rtc_time tm; + + if (!gsc_i2c_read(priv->rtc, 0, buf, 4)) { + timestamp = get_unaligned_le32(buf); + rtc_to_tm(timestamp, &tm); + printf("RTC : %4d-%02d-%02d %2d:%02d:%02d UTC\n", + tm.tm_year, tm.tm_mon, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); + } + } + + return 0; +} + +static int gsc_probe(struct udevice *dev) +{ + struct gsc_priv *priv = dev_get_priv(dev); + u8 buf[32]; + int ret; + + ret = gsc_i2c_read(dev, 0, buf, sizeof(buf)); + if (ret) + return ret; + + /* + * GSC chip version: + * GSCv2 has 16 registers (which overlap) + * GSCv3 has 32 registers + */ + priv->gscver = memcmp(buf, buf + 16, 16) ? 3 : 2; + priv->fwver = buf[GSC_SC_FWVER]; + priv->fwcrc = buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC + 1] << 8; + priv->hwmon = gsc_get_dev(GSC_BUSNO, GSC_HWMON_ADDR); + if (priv->hwmon) + dev_set_priv(priv->hwmon, priv); + priv->rtc = gsc_get_dev(GSC_BUSNO, GSC_RTC_ADDR); + if (priv->rtc) + dev_set_priv(priv->rtc, priv); + +#ifdef CONFIG_SPL_BUILD + gsc_banner(dev); +#endif + + return 0; +}; + +static const struct udevice_id gsc_ids[] = { + { .compatible = "gw,gsc", }, + { } +}; + +U_BOOT_DRIVER(gsc) = { + .name = "gsc", + .id = UCLASS_MISC, + .of_match = gsc_ids, + .probe = gsc_probe, + .priv_auto = sizeof(struct gsc_priv), + .flags = DM_FLAG_PRE_RELOC, +}; + +static int gsc_sleep(struct udevice *dev, unsigned long secs) +{ + u8 regs[4]; + int ret; + + printf("GSC Sleeping for %ld seconds\n", secs); + put_unaligned_le32(secs, regs); + ret = gsc_i2c_write(dev, GSC_SC_TIME_ADD, regs, sizeof(regs)); + if (ret) + goto err; + ret = gsc_i2c_read(dev, GSC_SC_CTRL1, regs, 1); + if (ret) + goto err; + regs[0] |= BIT(GSC_SC_CTRL1_SLEEP_ADD); + ret = gsc_i2c_write(dev, GSC_SC_CTRL1, regs, 1); + if (ret) + goto err; + regs[0] &= ~BIT(GSC_SC_CTRL1_SLEEP_ADD); + regs[0] |= BIT(GSC_SC_CTRL1_SLEEP_EN) | BIT(GSC_SC_CTRL1_SLEEP_ACTIVATE); + ret = gsc_i2c_write(dev, GSC_SC_CTRL1, regs, 1); + if (ret) + goto err; + + return 0; + +err: + printf("i2c error: %d\n", ret); + return ret; +} + +static int gsc_wd_disable(struct udevice *dev) +{ + int ret; + u8 reg; + + ret = gsc_i2c_read(dev, GSC_SC_CTRL1, ®, 1); + if (ret) + goto err; + reg |= BIT(GSC_SC_CTRL1_WDDIS); + reg &= ~BIT(GSC_SC_CTRL1_BOOT_CHK); + ret = gsc_i2c_write(dev, GSC_SC_CTRL1, ®, 1); + if (ret) + goto err; + puts("GSC : boot watchdog disabled\n"); + + return 0; + +err: + puts("i2c error"); + return ret; +} + +static int gsc_thermal(struct udevice *dev, const char *cmd, const char *val) +{ + struct gsc_priv *priv = dev_get_priv(dev); + int ret, tmax; + bool enabled; + u8 reg; + + if (priv->gscver < 3 || priv->fwver < 53) + return -EINVAL; + ret = gsc_thermal_get_info(dev, ®, &tmax, &enabled); + if (ret) + return ret; + if (cmd && !strcmp(cmd, "enable")) { + if (val && *val) { + tmax = clamp((int)simple_strtoul(val, NULL, 0), 72, 122); + reg &= ~0xf8; + reg |= ((tmax - 70) / 2) << 3; + } + reg |= BIT(0); + gsc_i2c_write(dev, GSC_SC_THERM_PROTECT, ®, 1); + } else if (cmd && !strcmp(cmd, "disable")) { + reg &= ~BIT(0); + gsc_i2c_write(dev, GSC_SC_THERM_PROTECT, ®, 1); + } else if (cmd) { + return -EINVAL; + } + + /* show status */ + gsc_thermal_info(dev); + puts("\n"); + + return 0; +} + +/* override in board files to display additional board EEPROM info */ +__weak void board_gsc_info(void) +{ +} + +static void gsc_info(struct udevice *dev) +{ + gsc_banner(dev); + board_gsc_info(); +} + +static int do_gsc(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *dev; + int ret; + + /* get/probe driver */ + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(gsc), &dev); + if (ret) + return CMD_RET_USAGE; + if (argc < 2) { + gsc_info(dev); + return CMD_RET_SUCCESS; + } else if (strcasecmp(argv[1], "sleep") == 0) { + if (argc < 3) + return CMD_RET_USAGE; + if (!gsc_sleep(dev, dectoul(argv[2], NULL))) + return CMD_RET_SUCCESS; + } else if (strcasecmp(argv[1], "hwmon") == 0) { + if (!gsc_hwmon(dev)) + return CMD_RET_SUCCESS; + } else if (strcasecmp(argv[1], "wd-disable") == 0) { + if (!gsc_wd_disable(dev)) + return CMD_RET_SUCCESS; + } else if (strcasecmp(argv[1], "thermal") == 0) { + char *cmd, *val; + + cmd = (argc > 2) ? argv[2] : NULL; + val = (argc > 3) ? argv[3] : NULL; + if (!gsc_thermal(dev, cmd, val)) + return CMD_RET_SUCCESS; + } + + return CMD_RET_USAGE; +} + +U_BOOT_CMD(gsc, 4, 1, do_gsc, "Gateworks System Controller", + "[sleep ]|[hwmon]|[wd-disable][thermal [disable|enable [temp]]]\n"); + +/* disable boot watchdog - useful for an SPL that wants to use falcon mode */ +int gsc_boot_wd_disable(void) +{ + struct udevice *dev; + int ret; + + /* get/probe driver */ + ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(gsc), &dev); + if (!ret) + ret = gsc_wd_disable(dev); + + return ret; +} + +# else + +/* + * GSCv2 will fail to ACK an I2C transaction if it is busy, which can occur + * during its 1HZ timer tick while reading ADC's. When this does occur, + * it will never be busy longer than 2 back-to-back transfers so retry 3 times. + */ +static int gsc_i2c_read(uint chip, uint addr, u8 *buf, int len) +{ + int retry = 3; + int n = 0; + int ret; + + while (n++ < retry) { + ret = i2c_read(chip, addr, 1, buf, len); + if (!ret) + break; + if (ret != -EREMOTEIO) + break; +printf("%s 0x%02x retry %d\n", __func__, addr, n); + mdelay(10); + } + return ret; +} + +static int gsc_i2c_write(uint chip, uint addr, u8 *buf, int len) +{ + int retry = 3; + int n = 0; + int ret; + + while (n++ < retry) { + ret = i2c_write(chip, addr, 1, buf, len); + if (!ret) + break; + if (ret != -EREMOTEIO) + break; +printf("%s 0x%02x retry %d\n", __func__, addr, n); + mdelay(10); + } + return ret; +} + +/* disable boot watchdog - useful for an SPL that wants to use falcon mode */ +int gsc_boot_wd_disable(void) +{ + u8 buf[32]; + int ret; + + i2c_set_bus_num(GSC_BUSNO); + ret = gsc_i2c_read(GSC_SC_ADDR, 0, buf, sizeof(buf)); + if (!ret) { + buf[GSC_SC_CTRL1] |= BIT(GSC_SC_CTRL1_WDDIS); + ret = gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, &buf[GSC_SC_CTRL1], 1); + printf("GSCv%d: v%d 0x%04x ", + memcmp(buf, buf + 16, 16) ? 3 : 2, + buf[GSC_SC_FWVER], + buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC + 1] << 8); + if (buf[GSC_SC_STATUS] & BIT(GSC_SC_IRQ_WATCHDOG)) { + puts("RST:WDT "); + buf[GSC_SC_STATUS] &= ~BIT(GSC_SC_IRQ_WATCHDOG); + gsc_i2c_write(GSC_SC_ADDR, GSC_SC_STATUS, &buf[GSC_SC_STATUS], 1); + } else { + puts("RST:VIN "); + } + puts("WDT:disabled\n"); + } + + return ret; +} + +#endif diff --git a/include/gsc.h b/include/gsc.h new file mode 100644 index 0000000000..132c312182 --- /dev/null +++ b/include/gsc.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2022 Gateworks Corporation + */ + +#ifndef _GSC_H_ +#define _GSC_H_ + +/* + * board_gsc_info - Display additional board info + */ +void board_gsc_info(void); + +/* + * gsc_boot_wd_disable - disable the BOOT watchdog + * + * Return: 0 on success or negative error on failure + */ +int gsc_boot_wd_disable(void); + +#endif