From: Siarhei Siamashka Date: Mon, 16 Feb 2015 08:23:59 +0000 (+0200) Subject: sunxi: Support the FEL boot mode in the regular u-boot build X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=840fe95c3bcff7692c51b90ebc0d350792597ff0;p=u-boot.git sunxi: Support the FEL boot mode in the regular u-boot build So that the CONFIG_SPL_FEL option is not needed anymore. And the regular SPL binary, generated by the default u-boot build, is now also bootable over USB in the FEL mode. The SPL still can boot from the SD card too. A bunch of system registers need to be saved/restored in order to ensure that the IRQ handler still works in the BROM FEL code after getting control back from the SPL. This is done in the sunxi code instead of abusing ifdefs in 'start.S'. The decision whether to load the main u-boot binary from the SD card or return to the FEL code in the BROM is done at runtime. Signed-off-by: Siarhei Siamashka [hdegoede@redhat.com: Since we now restore various regs before returning to the FEL BROM code we can drop the sunxi specific #ifdefs in start.S] Acked-by: Hans de Goede Signed-off-by: Hans de Goede --- diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 098a83ab71..9b49ece2d6 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -54,8 +54,7 @@ save_boot_params_ret: * (OMAP4 spl TEXT_BASE is not 32 byte aligned. * Continue to use ROM code vector only in OMAP4 spl) */ -#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) && \ - !defined(CONFIG_SPL_FEL) +#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */ mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register bic r0, #CR_V @ V = 0 @@ -68,9 +67,7 @@ save_boot_params_ret: /* the mask ROM code should have PLL and others stable */ #ifndef CONFIG_SKIP_LOWLEVEL_INIT -#ifndef CONFIG_SPL_FEL bl cpu_init_cp15 -#endif bl cpu_init_crit #endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index b7492ac1fe..c02c015096 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -30,6 +30,10 @@ struct fel_stash { uint32_t sp; uint32_t lr; + uint32_t cpsr; + uint32_t sctlr; + uint32_t vbar; + uint32_t cr; }; struct fel_stash fel_stash __attribute__((section(".data"))); @@ -108,15 +112,34 @@ void s_init(void) */ u32 spl_boot_device(void) { +#ifdef CONFIG_SPL_FEL /* - * Have we been asked to return to the FEL portion of the boot ROM? - * TODO: We need a more robust test here, or bracket this with - * #ifdef CONFIG_SPL_FEL. + * This is the legacy compile time configuration for a special FEL + * enabled build. It has many restrictions and can only boot over USB. */ - if (fel_stash.lr >= 0xffff0000 && fel_stash.lr < 0xffff4000) + return BOOT_DEVICE_BOARD; +#else + /* + * When booting from the SD card, the "eGON.BT0" signature is expected + * to be found in memory at the address 0x0004 (see the "mksunxiboot" + * tool, which generates this header). + * + * When booting in the FEL mode over USB, this signature is patched in + * memory and replaced with something else by the 'fel' tool. This other + * signature is selected in such a way, that it can't be present in a + * valid bootable SD card image (because the BROM would refuse to + * execute the SPL in this case). + * + * This branch is just making a decision at runtime whether to load + * the main u-boot binary from the SD card (if the "eGON.BT0" signature + * is found) or return to the FEL code in the BROM to wait and receive + * the main u-boot binary over USB. + */ + if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */ + return BOOT_DEVICE_MMC1; + else return BOOT_DEVICE_BOARD; - - return BOOT_DEVICE_MMC1; +#endif } /* No confirmation data available in SPL yet. Hardcode bootmode */ diff --git a/arch/arm/cpu/armv7/sunxi/fel_utils.S b/arch/arm/cpu/armv7/sunxi/fel_utils.S index 0c1de52df8..bf0033552d 100644 --- a/arch/arm/cpu/armv7/sunxi/fel_utils.S +++ b/arch/arm/cpu/armv7/sunxi/fel_utils.S @@ -15,11 +15,28 @@ ENTRY(save_boot_params) ldr r0, =fel_stash str sp, [r0, #0] str lr, [r0, #4] + mrs lr, cpsr @ Read CPSR + str lr, [r0, #8] + mrc p15, 0, lr, c1, c0, 0 @ Read CP15 SCTLR Register + str lr, [r0, #12] + mrc p15, 0, lr, c12, c0, 0 @ Read VBAR + str lr, [r0, #16] + mrc p15, 0, lr, c1, c0, 0 @ Read CP15 Control Register + str lr, [r0, #20] b save_boot_params_ret ENDPROC(save_boot_params) ENTRY(return_to_fel) mov sp, r0 mov lr, r1 + ldr r0, =fel_stash + ldr r1, [r0, #20] + mcr p15, 0, r1, c1, c0, 0 @ Write CP15 Control Register + ldr r1, [r0, #16] + mcr p15, 0, r1, c12, c0, 0 @ Write VBAR + ldr r1, [r0, #12] + mcr p15, 0, r1, c1, c0, 0 @ Write CP15 SCTLR Register + ldr r1, [r0, #8] + msr cpsr, r1 @ Write CPSR bx lr ENDPROC(return_to_fel)