From: Alex Waterman Date: Wed, 4 May 2011 13:10:15 +0000 (-0400) Subject: Decreases code size of the nand_spl X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=8370978318337df3979aa0852529d53d77ed736e;p=u-boot.git Decreases code size of the nand_spl The canyonland boards nand_spl size is just under the maximum 4KByte size. This patch decreases the size of the nand_spl to make a previous commit - commit 65a9db7be0868be91ba81b9b5bf821de82e6d9b0 - fit in the nand_spl. Signed-off-by: Alex Waterman Acked-by: Stefan Roese Signed-off-by: Scott Wood --- diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index 4a968784e7..46285241e1 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -77,6 +77,8 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 { struct nand_chip *this = mtd->priv; int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + void (*hwctrl)(struct mtd_info *mtd, int cmd, + unsigned int ctrl) = this->cmd_ctrl; if (this->dev_ready) while (!this->dev_ready(mtd)) @@ -95,25 +97,25 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 offs >>= 1; /* Begin command latch cycle */ - this->cmd_ctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + hwctrl(mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); /* Set ALE and clear CLE to start address cycle */ /* Column address */ - this->cmd_ctrl(mtd, offs & 0xff, + hwctrl(mtd, offs & 0xff, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ - this->cmd_ctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ + hwctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - this->cmd_ctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), + hwctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(mtd, ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE /* One more address cycle for devices > 128MiB */ - this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, + hwctrl(mtd, (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif /* Latch in address */ - this->cmd_ctrl(mtd, NAND_CMD_READSTART, + hwctrl(mtd, NAND_CMD_READSTART, NAND_CTRL_CLE | NAND_CTRL_CHANGE); - this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + hwctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * Wait a while for the data to be ready