From: Gabe Black Date: Wed, 10 Oct 2012 13:12:59 +0000 (+0000) Subject: x86: coreboot: Implement recursively scanning PCI busses X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=82e73f0e3da3ae8b1a6a14dafa8af38d140fb1b2;p=u-boot.git x86: coreboot: Implement recursively scanning PCI busses A hook is installed to configure PCI bus bridges as they encountered by u-boot. The hook extracts the secondary bus number from the bridge's config space and then recursively scans that bus. On Coreboot, the PCI bus address space has identity mapping with the physical address space, so declare it as such to ensure that the "pci_map_bar" function used by some PCI drivers is behaving properly. This fixes the EHCI PCI driver initialization on Stumpy. This was tested as follows: Ran the PCI command on Alex, saw devices on bus 0, the OXPCIe 952 on bus 1, and empty busses 2 through 5. This matches the bridges reported on bus 0 and the PCI configuration output from coreboot. Signed-off-by: Gabe Black Signed-off-by: Vincent Palatin Signed-off-by: Stefan Reinauer Signed-off-by: Simon Glass --- diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c index 0ddc97501b..8f94167480 100644 --- a/arch/x86/cpu/coreboot/pci.c +++ b/arch/x86/cpu/coreboot/pci.c @@ -31,15 +31,35 @@ static struct pci_controller coreboot_hose; +static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev, + struct pci_config_table *table) +{ + u8 secondary; + hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary); + hose->last_busno = max(hose->last_busno, secondary); + pci_hose_scan_bus(hose, secondary); +} + +static struct pci_config_table pci_coreboot_config_table[] = { + /* vendor, device, class, bus, dev, func */ + { PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI, + PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge }, + {} +}; + void pci_init_board(void) { + coreboot_hose.config_table = pci_coreboot_config_table; coreboot_hose.first_busno = 0; - coreboot_hose.last_busno = 0xff; - coreboot_hose.region_count = 0; + coreboot_hose.last_busno = 0; + + pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff, + PCI_REGION_MEM); + coreboot_hose.region_count = 1; pci_setup_type1(&coreboot_hose); pci_register_hose(&coreboot_hose); - coreboot_hose.last_busno = pci_hose_scan(&coreboot_hose); + pci_hose_scan(&coreboot_hose); }