From: Jon Nettleton <jon@solid-run.com>
Date: Mon, 11 Jun 2018 12:26:23 +0000 (+0300)
Subject: mx6cuboxi: Add emmc device tree suffix
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=824705d53cdbdead205bf4b2267c54d456c6c7bc;p=u-boot.git

mx6cuboxi: Add emmc device tree suffix

Mainline and now the SolidRun 4.9 nxp based tree use the new
reorganization of device-tree files that separate out the emmc
into its own dtb.  u-boot will now look for -emmc in the device
tree name if one is detected.

Signed-off-by: Jon Nettleton <jon@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---

diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h
index 1f7297d114..a647aaba68 100644
--- a/include/configs/mx6cuboxi.h
+++ b/include/configs/mx6cuboxi.h
@@ -71,6 +71,8 @@
 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	"som_rev=undefined\0" \
+	"has_emmc=undefined\0" \
 	"fdtfile=undefined\0" \
 	"fdt_addr_r=0x18000000\0" \
 	"fdt_addr=0x18000000\0" \
@@ -100,19 +102,21 @@
 			"fi; "	\
 		"fi\0" \
 	"findfdt="\
-		"if test $board_rev = MX6Q ; then " \
+		"if test ${board_rev} = MX6Q; then " \
 			"setenv fdtprefix imx6q; fi; " \
-		"if test $board_rev = MX6DL ; then " \
+		"if test ${board_rev} = MX6DL; then " \
 			"setenv fdtprefix imx6dl; fi; " \
-		"if test $som_rev = V15 ; then " \
+		"if test ${som_rev} = V15; then " \
 			"setenv fdtsuffix -som-v15; fi; " \
-		"if test $board_name = HUMMINGBOARD2 ; then " \
-			"setenv fdtfile ${fdtprefix}-hummingboard2${fdtsuffix}.dtb; fi; " \
-		"if test $board_name = HUMMINGBOARD ; then " \
-			"setenv fdtfile ${fdtprefix}-hummingboard${fdtsuffix}.dtb; fi; " \
-		"if test $board_name = CUBOXI ; then " \
-			"setenv fdtfile ${fdtprefix}-cubox-i${fdtsuffix}.dtb; fi; " \
-		"if test $fdtfile = undefined; then " \
+		"if test ${has_emmc} = yes; then " \
+			"setenv emmcsuffix -emmc; fi; " \
+		"if test ${board_name} = HUMMINGBOARD2 ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard2${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${board_name} = HUMMINGBOARD ; then " \
+			"setenv fdtfile ${fdtprefix}-hummingboard${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${board_name} = CUBOXI ; then " \
+			"setenv fdtfile ${fdtprefix}-cubox-i${emmcsuffix}${fdtsuffix}.dtb; fi; " \
+		"if test ${fdtfile} = undefined; then " \
 			"echo WARNING: Could not determine dtb to use; fi; \0" \
 	BOOTENV