From: Stefan Roese Date: Mon, 21 Dec 2015 12:56:33 +0000 (+0100) Subject: arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=81e33f4b65171a7dcb99a3efd9b3a45da129a21a;p=u-boot.git arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig Until now, the SoC selection for the ARCH_MVEBU platforms has been done in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As it needed to get selected for AXP and A38x based boards. This patch now changes this to move the SoC selection to Kconfig. And also uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x. This makes things a bit clearer - especially for new board additions. Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available CONFIG_ARMADA_38X and CONFIG_ARMADA_XP. And CONFIG_DDR3 is removed, as its not referenced anywhere. Signed-off-by: Stefan Roese Cc: Luka Perkov --- diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 18283d1d35..3d15673213 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -49,7 +49,7 @@ machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_KEYSTONE) += keystone # TODO: rename CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOOD machine-$(CONFIG_KIRKWOOD) += kirkwood -machine-$(CONFIG_ARMADA_XP) += mvebu +machine-$(CONFIG_ARCH_MVEBU) += mvebu # TODO: rename CONFIG_TEGRA -> CONFIG_ARCH_TEGRA # TODO: rename CONFIG_ORION5X -> CONFIG_ARCH_ORION5X machine-$(CONFIG_ORION5X) += orion5x diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 9f4d46bacf..d96b2ae540 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -1,20 +1,30 @@ if ARCH_MVEBU +config ARMADA_38X + bool + +config ARMADA_XP + bool + choice prompt "Marvell MVEBU (Armada XP/38x) board select" optional config TARGET_CLEARFOG bool "Support ClearFog" + select ARMADA_38X config TARGET_DB_88F6820_GP bool "Support DB-88F6820-GP" + select ARMADA_38X config TARGET_DB_MV784MP_GP bool "Support db-mv784mp-gp" + select ARMADA_XP config TARGET_MAXBCM bool "Support maxbcm" + select ARMADA_XP endchoice diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index 21c56a4d96..b96b81bd39 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -15,8 +15,8 @@ else obj-y = cpu.o obj-y += dram.o ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ../../../drivers/ddr/marvell/a38x/xor.o -obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ../../../drivers/ddr/marvell/axp/xor.o +obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o +obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o endif obj-y += gpio.o obj-y += mbus.o @@ -24,7 +24,7 @@ obj-y += timer.o obj-$(CONFIG_SPL_BUILD) += spl.o obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o -obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += serdes/a38x/ -obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += serdes/axp/ +obj-$(CONFIG_ARMADA_38X) += serdes/a38x/ +obj-$(CONFIG_ARMADA_XP) += serdes/axp/ endif diff --git a/arch/arm/mach-mvebu/dram.c b/arch/arm/mach-mvebu/dram.c index 059151a4b5..a8ec5ea21b 100644 --- a/arch/arm/mach-mvebu/dram.c +++ b/arch/arm/mach-mvebu/dram.c @@ -12,11 +12,8 @@ #include #include -#ifdef CONFIG_SYS_MVEBU_DDR_A38X -#include "../../../drivers/ddr/marvell/axp/xor.h" -#include "../../../drivers/ddr/marvell/axp/xor_regs.h" -#endif -#ifdef CONFIG_SYS_MVEBU_DDR_AXP +#if defined(CONFIG_ARCH_MVEBU) +/* Use common XOR definitions for A3x and AXP */ #include "../../../drivers/ddr/marvell/axp/xor.h" #include "../../../drivers/ddr/marvell/axp/xor_regs.h" #endif @@ -112,7 +109,7 @@ void mvebu_sdram_size_adjust(enum memory_bank bank) mvebu_sdram_bs_set(bank, size); } -#if defined(CONFIG_SYS_MVEBU_DDR_A38X) || defined(CONFIG_SYS_MVEBU_DDR_AXP) +#if defined(CONFIG_ARCH_MVEBU) static u32 xor_ctrl_save; static u32 xor_base_save; static u32 xor_mask_save; @@ -292,7 +289,7 @@ void dram_init_banksize(void) } } -#if defined(CONFIG_ARMADA_XP) +#if defined(CONFIG_ARCH_MVEBU) void board_add_ram_info(int use_default) { struct sar_freq_modes sar_freq; diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index c282fcbfcb..cc1fc5f9d4 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -17,7 +17,11 @@ #include -#if defined(CONFIG_ARMADA_XP) +#if defined(CONFIG_ARMADA_XP) || defined(CONFIG_ARMADA_38X) +/* + * Set this for the common xor register definitions needed in dram.c + * for A38x as well here. + */ #define MV88F78X60 /* for the DDR training bin_hdr code */ #endif diff --git a/arch/arm/mach-mvebu/mbus.c b/arch/arm/mach-mvebu/mbus.c index 346278e1be..df263bc3b3 100644 --- a/arch/arm/mach-mvebu/mbus.c +++ b/arch/arm/mach-mvebu/mbus.c @@ -491,7 +491,7 @@ int mvebu_mbus_probe(struct mbus_win windows[], int count) #if defined(CONFIG_KIRKWOOD) mbus_state.soc = &kirkwood_mbus_data; #endif -#if defined(CONFIG_ARMADA_XP) +#if defined(CONFIG_ARCH_MVEBU) mbus_state.soc = &armada_370_xp_mbus_data; #endif diff --git a/arch/arm/mach-mvebu/timer.c b/arch/arm/mach-mvebu/timer.c index aef2df2f7a..f5c2eaa808 100644 --- a/arch/arm/mach-mvebu/timer.c +++ b/arch/arm/mach-mvebu/timer.c @@ -31,7 +31,7 @@ int timer_init(void) writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x10); writel(TIMER_LOAD_VAL, MVEBU_TIMER_BASE + 0x14); -#if defined(CONFIG_ARMADA_XP) +#if defined(CONFIG_ARCH_MVEBU) /* On Armada XP / 38x ..., the 25MHz clock source needs to be enabled */ setbits_le32(MVEBU_TIMER_BASE + 0x00, BIT(11)); #endif diff --git a/drivers/Makefile b/drivers/Makefile index c9031f2ce8..00da40b704 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -14,8 +14,8 @@ obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ -obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/ -obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/ +obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ +obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index 52c16025f8..2c6d42410c 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -13,7 +13,7 @@ #include #elif defined(CONFIG_KIRKWOOD) #include -#elif defined(CONFIG_ARMADA_XP) +#elif defined(CONFIG_ARCH_MVEBU) #include #endif @@ -102,7 +102,7 @@ struct mvsata_port_registers { * Initialize SATA memory windows for Armada XP */ -#ifdef CONFIG_ARMADA_XP +#ifdef CONFIG_ARCH_MVEBU static void mvsata_ide_conf_mbus_windows(void) { const struct mbus_dram_target_info *dram; @@ -174,7 +174,7 @@ int ide_preinit(void) int ret = MVSATA_STATUS_TIMEOUT; int status; -#ifdef CONFIG_ARMADA_XP +#ifdef CONFIG_ARCH_MVEBU mvsata_ide_conf_mbus_windows(); #endif diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index f20d1b2291..5dc4fbba1f 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -20,7 +20,7 @@ #if defined(CONFIG_ORION5X) #include -#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARMADA_XP)) +#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU)) #include #elif defined(CONFIG_SUNXI) #include diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index c74415d82b..6c5356b35d 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -10,8 +10,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ -#define CONFIG_ARMADA_38X #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -170,10 +168,6 @@ #endif #endif -/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_A38X -#define CONFIG_DDR3 - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index d76ceb72b0..03a3d316f2 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -10,8 +10,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ -#define CONFIG_ARMADA_38X #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -170,10 +168,6 @@ #endif #endif -/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_A38X -#define CONFIG_DDR3 - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h index c354e6f0d8..c8b0344185 100644 --- a/include/configs/db-mv784mp-gp.h +++ b/include/configs/db-mv784mp-gp.h @@ -10,7 +10,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ #define CONFIG_DB_784MP_GP /* Board target name for DDR training */ #define CONFIG_DISPLAY_BOARDINFO_LATE @@ -144,7 +143,6 @@ #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_SPD_EEPROM 0x4e #define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h index 23e552646d..43d7fd03a3 100644 --- a/include/configs/maxbcm.h +++ b/include/configs/maxbcm.h @@ -10,7 +10,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_ARMADA_XP /* SOC Family Name */ #define CONFIG_DISPLAY_BOARDINFO_LATE /* @@ -106,7 +105,6 @@ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ -#define CONFIG_SYS_MVEBU_DDR_AXP #define CONFIG_DDR_FIXED_SIZE (1 << 20) /* 1GiB */ #define CONFIG_BOARD_ECC_SUPPORT /* this board supports ECC */ diff --git a/tools/Makefile b/tools/Makefile index d49e40dd56..1382b0562e 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -156,7 +156,7 @@ ubsha1-objs := os_support.o ubsha1.o lib/sha1.o HOSTCFLAGS_ubsha1.o := -pedantic hostprogs-$(CONFIG_KIRKWOOD) += kwboot -hostprogs-$(CONFIG_ARMADA_XP) += kwboot +hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot hostprogs-y += proftool hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela