From: Stefan Agner Date: Thu, 15 Sep 2016 22:04:39 +0000 (-0700) Subject: imx: mx6: fix USB bmode to use reserved value X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=81c4eccb55ccbe4a7bb4016b23738c3c57dc364d;p=u-boot.git imx: mx6: fix USB bmode to use reserved value Currently the bmode "usb" uses BOOT_CFG1 to 0x01, -which means BOOT_CFG1[7:4] is set to b0000. According to Table 8-7 Boot Device Selection this is NOR/OneNAND and not Reserved. Use 0x10 which leads to b0001, which is a Reserved boot device. With that the SoC reliably falls back to the serial loader. Cc: Troy Kisky Signed-off-by: Stefan Agner Tested-by: Troy Kisky --- diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index bc3e634bb5..09f2b0254a 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -514,7 +514,7 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) const struct boot_mode soc_boot_modes[] = { {"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)}, /* reserved value should start rom usb */ - {"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)}, + {"usb", MAKE_CFGVAL(0x10, 0x00, 0x00, 0x00)}, {"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)}, {"ecspi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)}, {"ecspi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},