From: Michael Walle Date: Wed, 13 Oct 2021 16:14:26 +0000 (+0200) Subject: arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7f900eabf7d665ccd1ae8cdf7743a0ea46ec13b2;p=u-boot.git arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux Now that everything is prepared, copy the fsl-ls1028a.dtsi from the linux kernel v5.14.12. Notable changes: - second watchdog added - the number of chip selects of the SPI controller is now correct and reflects what the hardware offers - the LPUARTs have the correct clock parent - USB controllers are enabled by default, which was already the case before this sync because all board enabled all the USB controller nodes. A linux patch to fix this is pending. - the eSDHC controller changes from big-endian to little-endian, but that property seems to be not used at all. Signed-off-by: Michael Walle Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain --- diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index d2f558d208..06b36cc658 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -1,12 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * NXP ls1028a SOC common device tree source + * Device Tree Include file for NXP Layerscape-1028A family SoC. * - * Copyright 2019-2020 NXP + * Copyright 2018-2020 NXP + * + * Harninder Rai * */ +#include #include +#include / { compatible = "fsl,ls1028a"; @@ -14,6 +18,54 @@ #address-cells = <2>; #size-cells = <2>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + clocks = <&clockgen QORIQ_CLK_CMUX 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PW20>; + #cooling-cells = <2>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "psci"; + + CPU_PW20: cpu-pw20 { + compatible = "arm,idle-state"; + idle-state-name = "PW20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <2000>; + exit-latency-us = <2000>; + min-residency-us = <6000>; + }; + }; + sysclk: sysclk { compatible = "fixed-clock"; #clock-cells = <0>; @@ -21,14 +73,33 @@ clock-output-names = "sysclk"; }; - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06040000 0 0x40000>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = ; + osc_27m: clock-osc-27m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "phy_27m"; + }; + + dpclk: clock-controller@f1f0000 { + compatible = "fsl,ls1028a-plldig"; + reg = <0x0 0xf1f0000 0x0 0xffff>; + #clock-cells = <0>; + clocks = <&osc_27m>; + }; + + firmware { + optee: optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&rst>; + offset = <0>; + mask = <0x02>; }; timer { @@ -43,13 +114,123 @@ IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = ; + }; + + gic: interrupt-controller@6000000 { + compatible= "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06040000 0 0x40000>; /* GIC Redistributor */ + #interrupt-cells= <3>; + interrupt-controller; + interrupts = ; + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ + }; + }; + + thermal-zones { + ddr-controller { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + core_cluster_alert: core-cluster-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + core_cluster_crit: core-cluster-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&core_cluster_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <2>; #size-cells = <2>; ranges; - clockgen: clocking@1300000 { + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = ; + little-endian; + }; + + dcfg: syscon@1e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd"; + reg = <0x0 0x1e00000 0x0 0x10000>; + ranges = <0x0 0x0 0x1e00000 0x10000>; + little-endian; + + fspi_clk: clock-controller@900 { + compatible = "fsl,ls1028a-flexspi-clk"; + reg = <0x900 0x4>; + #clock-cells = <0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 0>; + clock-output-names = "fspi_clk"; + }; + }; + + rst: syscon@1e60000 { + compatible = "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + little-endian; + }; + + scfg: syscon@1fc0000 { + compatible = "fsl,ls1028a-scfg", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clock-controller@1300000 { compatible = "fsl,ls1028a-clockgen"; reg = <0x0 0x1300000 0x0 0xa0000>; #clock-cells = <2>; @@ -62,8 +243,8 @@ #size-cells = <0>; reg = <0x0 0x2000000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -73,8 +254,8 @@ #size-cells = <0>; reg = <0x0 0x2010000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -84,8 +265,8 @@ #size-cells = <0>; reg = <0x0 0x2020000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -95,8 +276,8 @@ #size-cells = <0>; reg = <0x0 0x2030000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -106,8 +287,8 @@ #size-cells = <0>; reg = <0x0 0x2040000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -117,8 +298,8 @@ #size-cells = <0>; reg = <0x0 0x2050000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -128,8 +309,8 @@ #size-cells = <0>; reg = <0x0 0x2060000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; @@ -139,152 +320,237 @@ #size-cells = <0>; reg = <0x0 0x2070000 0x0 0x10000>; interrupts = ; - clock-names = "i2c"; - clocks = <&clockgen 4 0>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; status = "disabled"; }; - fspi: flexspi@20c0000 { + fspi: spi@20c0000 { compatible = "nxp,lx2160a-fspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "fspi_en", "fspi"; interrupts = ; + clocks = <&fspi_clk>, <&fspi_clk>; + clock-names = "fspi_en", "fspi"; status = "disabled"; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>; interrupts = ; clock-names = "dspi"; - clocks = <&clockgen 4 0>; - spi-num-chipselects = <5>; - litte-endian; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 62>, <&edma0 0 60>; + dma-names = "tx", "rx"; + spi-num-chipselects = <4>; + little-endian; status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2110000 0x0 0x10000>; interrupts = ; clock-names = "dspi"; - clocks = <&clockgen 4 0>; - spi-num-chipselects = <5>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 58>, <&edma0 0 56>; + dma-names = "tx", "rx"; + spi-num-chipselects = <4>; little-endian; status = "disabled"; }; - dspi2: dspi@2120000 { + dspi2: spi@2120000 { compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2120000 0x0 0x10000>; interrupts = ; clock-names = "dspi"; - clocks = <&clockgen 4 0>; - spi-num-chipselects = <5>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 54>, <&edma0 0 2>; + dma-names = "tx", "rx"; + spi-num-chipselects = <3>; little-endian; status = "disabled"; }; - esdhc: esdhc@2140000 { - compatible = "fsl,esdhc"; + esdhc: mmc@2140000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; interrupts = ; - big-endian; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; bus-width = <4>; status = "disabled"; }; - esdhc1: esdhc@2150000 { - compatible = "fsl,esdhc"; + esdhc1: mmc@2150000 { + compatible = "fsl,ls1028a-esdhc", "fsl,esdhc"; reg = <0x0 0x2150000 0x0 0x10000>; interrupts = ; - big-endian; + clock-frequency = <0>; /* fixed up by bootloader */ + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; + voltage-ranges = <1800 1800>; + sdhci,auto-cmd12; non-removable; + little-endian; bus-width = <4>; status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + duart0: serial@21c0500 { - device_type = "serial"; compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; + reg = <0x00 0x21c0500 0x0 0x100>; interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; duart1: serial@21c0600 { - device_type = "serial"; compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; + reg = <0x00 0x21c0600 0x0 0x100>; interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; + lpuart0: serial@2260000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2260000 0x0 0x1000>; - interrupts = <0 232 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 32>, + <&edma0 1 33>; status = "disabled"; }; lpuart1: serial@2270000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2270000 0x0 0x1000>; - interrupts = <0 233 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 30>, + <&edma0 1 31>; status = "disabled"; }; lpuart2: serial@2280000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2280000 0x0 0x1000>; - interrupts = <0 234 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 28>, + <&edma0 1 29>; status = "disabled"; }; lpuart3: serial@2290000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x2290000 0x0 0x1000>; - interrupts = <0 235 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 26>, + <&edma0 1 27>; status = "disabled"; }; lpuart4: serial@22a0000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22a0000 0x0 0x1000>; - interrupts = <0 236 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 24>, + <&edma0 1 25>; status = "disabled"; }; lpuart5: serial@22b0000 { compatible = "fsl,ls1028a-lpuart"; reg = <0x0 0x22b0000 0x0 0x1000>; - interrupts = <0 237 0x4>; - clocks = <&sysclk>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; clock-names = "ipg"; + dma-names = "rx","tx"; + dmas = <&edma0 1 22>, + <&edma0 1 23>; status = "disabled"; }; + edma0: dma-controller@22c0000 { + #dma-cells = <2>; + compatible = "fsl,ls1028a-edma", "fsl,vf610-edma"; + reg = <0x0 0x22c0000 0x0 0x10000>, + <0x0 0x22d0000 0x0 0x10000>, + <0x0 0x22e0000 0x0 0x10000>; + interrupts = , + ; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + }; + gpio1: gpio@2300000 { compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; @@ -318,28 +584,34 @@ little-endian; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; - status = "disabled"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = ; dr_mode = "host"; - status = "disabled"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { compatible = "fsl,ls1028a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ - 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; reg-names = "ahci", "sata-ecc"; interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; status = "disabled"; }; @@ -348,12 +620,25 @@ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ <0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; + interrupts = , /* PME interrupt */ + ; /* aer interrupt */ + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; @@ -362,44 +647,380 @@ reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */ <0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "regs", "config"; + interrupts = , + ; + interrupt-names = "pme", "aer"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; + num-viewport = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */ 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ status = "disabled"; }; - cluster1_core0_watchdog: wdt@c000000 { + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <8>; + #iommu-cells = <1>; + stream-match-mask = <0x7c00>; + /* global secure fault */ + interrupts = , + /* combined secure interrupt */ + , + /* global non-secure fault */ + , + /* combined non-secure interrupt */ + , + /* performance counter interrupts 0-7 */ + , , + , , + /* per context interrupt, 64 interrupts */ + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , , + , ; + }; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = ; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = ; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = ; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + }; + }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = , + , + , + , + ; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + }; + + cluster1_core0_watchdog: watchdog@c000000 { compatible = "arm,sp805", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + cluster1_core1_watchdog: watchdog@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(16)>; + clock-names = "wdog_clk", "apb_pclk"; + }; + + sai1: audio-controller@f100000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf100000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 4>, + <&edma0 1 3>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai2: audio-controller@f110000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf110000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 6>, + <&edma0 1 5>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai3: audio-controller@f120000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf120000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 8>, + <&edma0 1 7>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai4: audio-controller@f130000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf130000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 10>, + <&edma0 1 9>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai5: audio-controller@f140000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf140000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 12>, + <&edma0 1 11>; + fsl,sai-asynchronous; + status = "disabled"; + }; + + sai6: audio-controller@f150000 { + #sound-dai-cells = <0>; + compatible = "fsl,vf610-sai"; + reg = <0x0 0xf150000 0x0 0x10000>; + interrupts = ; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 14>, + <&edma0 1 13>; + fsl,sai-asynchronous; + status = "disabled"; }; - pcie@1f0000000 { + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; + fsl,tmu-calibration = <0x00000000 0x00000024 + 0x00000001 0x0000002b + 0x00000002 0x00000031 + 0x00000003 0x00000038 + 0x00000004 0x0000003f + 0x00000005 0x00000045 + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x00000060 + 0x0000000a 0x00000066 + 0x0000000b 0x0000006d + + 0x00010000 0x0000001c + 0x00010001 0x00000024 + 0x00010002 0x0000002c + 0x00010003 0x00000035 + 0x00010004 0x0000003d + 0x00010005 0x00000045 + 0x00010006 0x0000004d + 0x00010007 0x00000055 + 0x00010008 0x0000005e + 0x00010009 0x00000066 + 0x0001000a 0x0000006e + + 0x00020000 0x00000018 + 0x00020001 0x00000022 + 0x00020002 0x0000002d + 0x00020003 0x00000038 + 0x00020004 0x00000043 + 0x00020005 0x0000004d + 0x00020006 0x00000058 + 0x00020007 0x00000063 + 0x00020008 0x0000006e + + 0x00030000 0x00000010 + 0x00030001 0x0000001c + 0x00030002 0x00000029 + 0x00030003 0x00000036 + 0x00030004 0x00000042 + 0x00030005 0x0000004f + 0x00030006 0x0000005b + 0x00030007 0x00000068>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + pcie@1f0000000 { /* Integrated Endpoint Root Complex */ compatible = "pci-host-ecam-generic"; - /* ECAM bus 0, HW has more space reserved but not populated */ - bus-range = <0x0 0x0>; reg = <0x01 0xf0000000 0x0 0x100000>; #address-cells = <3>; #size-cells = <2>; + msi-parent = <&its>; device_type = "pci"; - ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>; + bus-range = <0x0 0x0>; + dma-coherent; + msi-map = <0 &its 0x17 0xe>; + iommu-map = <0 &smmu 0x17 0xe>; + /* PF0-6 BAR0 - non-prefetchable memory */ + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000 + /* PF0-6 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000 + /* PF0: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000 + /* PF0: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000 + /* PF1: VF0-1 BAR0 - non-prefetchable memory */ + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000 + /* PF1: VF0-1 BAR2 - prefetchable memory */ + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000 + /* BAR4 (PF5) - non-prefetchable memory */ + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>; - enetc_port0: pci@0,0 { + enetc_port0: ethernet@0,0 { + compatible = "fsl,enetc"; reg = <0x000000 0 0 0 0>; status = "disabled"; }; - enetc_port1: pci@0,1 { + enetc_port1: ethernet@0,1 { + compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; status = "disabled"; }; - enetc_port2: pci@0,2 { + enetc_port2: ethernet@0,2 { + compatible = "fsl,enetc"; reg = <0x000200 0 0 0 0>; - status = "disabled"; phy-mode = "internal"; + status = "disabled"; fixed-link { speed = <2500>; @@ -407,26 +1028,32 @@ }; }; - enetc_mdio_pf3: pci@0,3 { - #address-cells=<0>; - #size-cells=<1>; + enetc_mdio_pf3: mdio@0,3 { + compatible = "fsl,enetc-mdio"; reg = <0x000300 0 0 0 0>; - status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; - fixed-link { - speed = <1000>; - full-duplex; - }; + ethernet@0,4 { + compatible = "fsl,enetc-ptp"; + reg = <0x000400 0 0 0 0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 3>; + little-endian; + fsl,extts-fifo; }; - mscc_felix: pci@0,5 { + mscc_felix: ethernet-switch@0,5 { reg = <0x000500 0 0 0 0>; + /* IEP INT_B */ + interrupts = ; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; + /* External ports */ mscc_felix_port0: port@0 { reg = <0>; status = "disabled"; @@ -447,6 +1074,7 @@ status = "disabled"; }; + /* Internal ports */ mscc_felix_port4: port@4 { reg = <4>; phy-mode = "internal"; @@ -467,15 +1095,67 @@ speed = <1000>; full-duplex; }; - }; }; }; - enetc_port3: pci@0,6 { + enetc_port3: ethernet@0,6 { + compatible = "fsl,enetc"; reg = <0x000600 0 0 0 0>; - status = "disabled"; phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = ; + }; + }; + + /* Integrated Endpoint Register Block */ + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; + }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + little-endian; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1028a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = ; + }; + }; + + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>, + <&clockgen QORIQ_CLK_HWACCEL 2>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-value = <0xd000d000>; + + port { + dp0_out: endpoint { + }; }; }; diff --git a/include/dt-bindings/clock/fsl,qoriq-clockgen.h b/include/dt-bindings/clock/fsl,qoriq-clockgen.h new file mode 100644 index 0000000000..ddec7d0bdc --- /dev/null +++ b/include/dt-bindings/clock/fsl,qoriq-clockgen.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef DT_CLOCK_FSL_QORIQ_CLOCKGEN_H +#define DT_CLOCK_FSL_QORIQ_CLOCKGEN_H + +#define QORIQ_CLK_SYSCLK 0 +#define QORIQ_CLK_CMUX 1 +#define QORIQ_CLK_HWACCEL 2 +#define QORIQ_CLK_FMAN 3 +#define QORIQ_CLK_PLATFORM_PLL 4 +#define QORIQ_CLK_CORECLK 5 + +#define QORIQ_CLK_PLL_DIV(x) ((x) - 1) + +#endif /* DT_CLOCK_FSL_QORIQ_CLOCKGEN_H */