From: Simon Glass Date: Fri, 12 Aug 2022 01:34:48 +0000 (-0600) Subject: blk: Rename HAVE_BLOCK_DEVICE X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7f8967c2b82f9917987b69fbf43f8f591f3a8516;p=u-boot.git blk: Rename HAVE_BLOCK_DEVICE This option is fact really related to SPL. For U-Boot proper we always use driver model for block devices, so CONFIG_BLK is enabled if block devices are in use. It is only for SPL that we have two cases: - SPL_BLK is enabled, in which case we use driver model and blk-uclass.c - SPL_BLK is not enabled, in which case (if we need block devices) we must use blk_legacy.c Rename the symbol to SPL_LEGACY_BLOCK to make this clear. This is different enough from BLK and SPL_BLK that there should be no confusion. Signed-off-by: Simon Glass --- diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 70d97815f0..222472a6fb 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -792,7 +792,7 @@ config SPL_DM_MAILBOX config SPL_MMC bool "Support MMC" depends on MMC - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help Enable support for MMC (Multimedia Card) within SPL. This enables the MMC protocol implementation and allows any enabled drivers to @@ -1318,7 +1318,7 @@ config SPL_THERMAL config SPL_USB_HOST bool "Support USB host drivers" - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help Enable access to USB (Universal Serial Bus) host devices so that SPL can load U-Boot from a connected USB peripheral, such as a USB diff --git a/configs/axm_defconfig b/configs/axm_defconfig index dc262c95a3..293052b901 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -80,7 +80,7 @@ CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM=y CONFIG_BLK=y -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_SPL_LEGACY_BLOCK=y CONFIG_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_GPIO=y diff --git a/configs/bcm968380gerg_ram_defconfig b/configs/bcm968380gerg_ram_defconfig index a0924689e4..55d74266b7 100644 --- a/configs/bcm968380gerg_ram_defconfig +++ b/configs/bcm968380gerg_ram_defconfig @@ -42,7 +42,7 @@ CONFIG_CMD_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y # CONFIG_NET is not set # CONFIG_DM_DEVICE_REMOVE is not set -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_SPL_LEGACY_BLOCK=y CONFIG_BCM6345_GPIO=y CONFIG_LED=y CONFIG_LED_BCM6328=y diff --git a/configs/gardena-smart-gateway-mt7688_defconfig b/configs/gardena-smart-gateway-mt7688_defconfig index b9ee281be9..fdfab14d53 100644 --- a/configs/gardena-smart-gateway-mt7688_defconfig +++ b/configs/gardena-smart-gateway-mt7688_defconfig @@ -78,7 +78,7 @@ CONFIG_VERSION_VARIABLE=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y # CONFIG_DM_DEVICE_REMOVE is not set -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_SPL_LEGACY_BLOCK=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_LED=y CONFIG_LED_BLINK=y diff --git a/configs/nsim_hs38_defconfig b/configs/nsim_hs38_defconfig index 8e5e8ea305..22690e7236 100644 --- a/configs/nsim_hs38_defconfig +++ b/configs/nsim_hs38_defconfig @@ -30,7 +30,8 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_USE_BOOTFILE=y CONFIG_BOOTFILE="uImage" CONFIG_BLK=y -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_SPL_LEGACY_BLOCK=y +CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 172ac18351..4ef0157224 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -40,7 +40,7 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_SIMPLE_BUS_CORRECT_RANGE=y CONFIG_BLK=y -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_SPL_LEGACY_BLOCK=y CONFIG_LBA48=y CONFIG_CHIP_SELECTS_PER_CTRL=0 CONFIG_MPC8XXX_GPIO=y diff --git a/disk/Makefile b/disk/Makefile index 458e21e3fb..45588cf66e 100644 --- a/disk/Makefile +++ b/disk/Makefile @@ -10,8 +10,8 @@ ifdef CONFIG_$(SPL_TPL_)BLK obj-$(CONFIG_$(SPL_TPL_)PARTITIONS) += disk-uclass.o endif -# Must have BLK or HAVE_BLOCK_DEVICE to support partitions -ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_HAVE_BLOCK_DEVICE),) +# Must have BLK or SPL_LEGACY_BLOCK to support partitions +ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),) obj-$(CONFIG_$(SPL_TPL_)MAC_PARTITION) += part_mac.o obj-$(CONFIG_$(SPL_TPL_)DOS_PARTITION) += part_dos.o obj-$(CONFIG_$(SPL_TPL_)ISO_PARTITION) += part_iso.o diff --git a/disk/disk-uclass.c b/disk/disk-uclass.c index f3fb942a6b..9351a5cfa6 100644 --- a/disk/disk-uclass.c +++ b/disk/disk-uclass.c @@ -27,8 +27,7 @@ int part_create_block_devices(struct udevice *blk_dev) struct udevice *dev; int ret; - if (!CONFIG_IS_ENABLED(PARTITIONS) || - !CONFIG_IS_ENABLED(HAVE_BLOCK_DEVICE)) + if (!CONFIG_IS_ENABLED(PARTITIONS) || !blk_enabled()) return 0; if (device_get_uclass_id(blk_dev) != UCLASS_BLK) diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst index 5a60436925..742fea5515 100644 --- a/doc/develop/driver-model/migration.rst +++ b/doc/develop/driver-model/migration.rst @@ -57,7 +57,7 @@ In concert with maintainers migrating their block device usage to the appropriate DM driver, CONFIG_BLK needs to be set as well. The final deadline here coincides with the final deadline for migration of the various block subsystems. At this point we will be able to audit and correct the logic in -Kconfig around using CONFIG_PARTITIONS and CONFIG_HAVE_BLOCK_DEVICE and make +Kconfig around using CONFIG_PARTITIONS and CONFIG_SPL_LEGACY_BLOCK and make use of CONFIG_BLK / CONFIG_SPL_BLK as needed. CONFIG_DM_SPI / CONFIG_DM_SPI_FLASH diff --git a/drivers/Makefile b/drivers/Makefile index f2154e15d6..9d9f69a3c9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -59,7 +59,7 @@ obj-$(CONFIG_SPL_WATCHDOG) += watchdog/ obj-$(CONFIG_SPL_USB_HOST) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ obj-$(CONFIG_SPL_SATA) += ata/ scsi/ -obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/ +obj-$(CONFIG_SPL_LEGACY_BLOCK) += block/ obj-$(CONFIG_SPL_BLK) += block/ obj-$(CONFIG_SPL_THERMAL) += thermal/ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 70e6bd321a..c3f2ac058a 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -9,7 +9,7 @@ config AHCI config SATA bool "Support SATA controllers" - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help This enables support for SATA (Serial Advanced Technology Attachment), a serial bus standard for connecting to hard drives and diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index df242df9c5..5a0c434058 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -11,7 +11,7 @@ config BLK be partitioned into several areas, called 'partitions' in U-Boot. A filesystem can be placed in each partition. -config HAVE_BLOCK_DEVICE +config SPL_LEGACY_BLOCK bool "Enable Legacy Block Device" help Some devices require block support whether or not DM is enabled @@ -109,7 +109,7 @@ endif # EFI_MEDIA config IDE bool "Support IDE controllers" - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help Enables support for IDE (Integrated Drive Electronics) hard drives. This allows access to raw blocks and filesystems on an IDE drive @@ -222,7 +222,7 @@ endif # IDE config LBA48 bool "Enable LBA support for disks larger than 137GB" - depends on HAVE_BLOCK_DEVICE + depends on SPL_LEGACY_BLOCK help Set this to enable support for disks larger than 137GB. Also look at CONFIG_SYS_64BIT_LBA. Without both of these, LBA48 @@ -231,7 +231,7 @@ config LBA48 config SYS_64BIT_LBA bool "Enable 64bit number of blocks on a block device" - depends on HAVE_BLOCK_DEVICE + depends on SPL_LEGACY_BLOCK help Make the block subsystem use 64bit sector addresses, rather than the default of 32bit. diff --git a/drivers/block/Makefile b/drivers/block/Makefile index b221a7c6ee..f48d3e1214 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_)BLK) += blk-uclass.o ifndef CONFIG_$(SPL_)BLK -obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_legacy.o +obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o endif ifndef CONFIG_SPL_BUILD diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 0dcec8adce..5cd29758be 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -3,7 +3,7 @@ menu "MMC Host controller Support" config MMC bool "MMC/SD/SDIO card support" default ARM || PPC || SANDBOX - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK select DM_MMC if DM help This selects MultiMediaCard, Secure Digital and Secure diff --git a/drivers/nvme/Kconfig b/drivers/nvme/Kconfig index 2a103ab5ed..7b6d54615f 100644 --- a/drivers/nvme/Kconfig +++ b/drivers/nvme/Kconfig @@ -4,7 +4,7 @@ config NVME bool "NVM Express device support" - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help This option enables support for NVM Express devices. It supports basic functions of NVMe (read/write). diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 19872fb52d..4d643816fc 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1,6 +1,6 @@ config SCSI bool "Support SCSI controllers" - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help This enables support for SCSI (Small Computer System Interface), a parallel interface widely used with storage peripherals such as diff --git a/drivers/xen/Kconfig b/drivers/xen/Kconfig index 6ad2a93668..20db2c5306 100644 --- a/drivers/xen/Kconfig +++ b/drivers/xen/Kconfig @@ -2,7 +2,7 @@ config PVBLOCK bool "Xen para-virtualized block device" depends on DM select BLK - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK help This driver implements the front-end of the Xen virtual block device driver. It communicates with a back-end driver diff --git a/include/blk.h b/include/blk.h index 332481a90b..5bdffe7401 100644 --- a/include/blk.h +++ b/include/blk.h @@ -23,7 +23,7 @@ struct udevice; static inline bool blk_enabled(void) { - return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_HAVE_BLOCK_DEVICE); + return CONFIG_IS_ENABLED(BLK) || IS_ENABLED(CONFIG_SPL_LEGACY_BLOCK); } /* Interface types: */ diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index 5cfff8c56b..c4e812594f 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -20,7 +20,7 @@ config EFI_LOADER select EVENT_DYNAMIC select LIB_UUID imply PARTITION_UUIDS - select HAVE_BLOCK_DEVICE + select SPL_LEGACY_BLOCK select REGEX imply FAT imply FAT_WRITE