From: Dirk Behme Date: Thu, 12 Jan 2012 23:49:24 +0000 (+0000) Subject: i.mx6q: configs: Add fdt_high and initrd_high variables X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7e9603e;p=u-boot.git i.mx6q: configs: Add fdt_high and initrd_high variables To be able to load the device tree and initrd correctly, set the fdt_high and initrd_high environment variables. Using 0xffffffff implies that the device tree and the initrd are initially copied to working addresses. This will avoid an additional copy. Loading the device tree to 0x30000000 and the initrd to 0x3c000000 should work for both boards, the ARM2 and SabreLite. Example (SabreLite): fatload mmc 0:2 0x10000000 uImage fatload mmc 0:2 0x3c000000 uInitrd fatload mmc 0:2 0x30000000 board.dtb bootm 0x10000000 0x3c000000 0x30000000 Note: This requires that the kernel has CONFIG_HIGHMEM enabled. Signed-off-by: Dirk Behme CC: Jason Liu CC: Stefano Babic Acked-by: Jason Liu --- diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 124a7a63ae..0962d3c8c4 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -86,6 +86,8 @@ "script=boot.scr\0" \ "uimage=uImage\0" \ "console=ttymxc3\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ "mmcdev=1\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 464f0ec650..ba09f15a73 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -78,6 +78,8 @@ "script=boot.scr\0" \ "uimage=uImage\0" \ "console=ttymxc3\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \