From: Patrick Delaunay Date: Tue, 29 Jun 2021 10:01:07 +0000 (+0200) Subject: arm: dts: stm32mp15: alignment with v5.13 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7e549345329a5c870fbc10b59b6a4cd6aab531a5;p=u-boot.git arm: dts: stm32mp15: alignment with v5.13 Device tree alignment with Linux kernel v5.13 - ARM: dts: stm32: Add PTP clock to Ethernet controller - ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151 - ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control - ARM: dts: stm32: Add wakeup management on stm32mp15x UART nodes - ARM: dts: stm32: add #clock-cells property to usbphyc node on stm32mp151 - ARM: dts: stm32: Add STM32MP1 I2C6 SDA/SCL pinmux - ARM: dts: stm32: Rename mmc controller nodes to mmc@ - ARM: dts: stm32: Add additional init state for SDMMC1 pins Signed-off-by: Patrick Delaunay Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi index 20a59e8f7a..060baa8b7e 100644 --- a/arch/arm/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi @@ -1273,6 +1273,18 @@ }; }; + sdmmc1_b4_init_pins_a: sdmmc1-b4-init-0 { + pins1 { + pinmux = , /* SDMMC1_D0 */ + , /* SDMMC1_D1 */ + , /* SDMMC1_D2 */ + ; /* SDMMC1_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = , /* SDMMC1_D0 */ @@ -1299,6 +1311,17 @@ }; }; + sdmmc1_dir_init_pins_a: sdmmc1-dir-init-0 { + pins1 { + pinmux = , /* SDMMC1_D0DIR */ + , /* SDMMC1_D123DIR */ + ; /* SDMMC1_CDIR */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { pins { pinmux = , /* SDMMC1_D0DIR */ @@ -1868,10 +1891,15 @@ usart2_idle_pins_c: usart2-idle-2 { pins1 { pinmux = , /* USART2_TX */ - , /* USART2_RTS */ ; /* USART2_CTS_NSS */ }; pins2 { + pinmux = ; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins3 { pinmux = ; /* USART2_RX */ bias-disable; }; @@ -1917,10 +1945,15 @@ usart3_idle_pins_b: usart3-idle-1 { pins1 { pinmux = , /* USART3_TX */ - , /* USART3_RTS */ ; /* USART3_CTS_NSS */ }; pins2 { + pinmux = ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = ; /* USART3_RX */ bias-disable; }; @@ -1953,10 +1986,15 @@ usart3_idle_pins_c: usart3-idle-2 { pins1 { pinmux = , /* USART3_TX */ - , /* USART3_RTS */ ; /* USART3_CTS_NSS */ }; pins2 { + pinmux = ; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = ; /* USART3_RX */ bias-disable; }; @@ -2018,6 +2056,23 @@ }; }; + i2c6_pins_a: i2c6-0 { + pins { + pinmux = , /* I2C6_SCL */ + ; /* I2C6_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c6_sleep_pins_a: i2c6-sleep-0 { + pins { + pinmux = , /* I2C6_SCL */ + ; /* I2C6_SDA */ + }; + }; + spi1_pins_a: spi1-0 { pins1 { pinmux = , /* SPI1_SCK */ diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi index b564fc6269..177927d14e 100644 --- a/arch/arm/dts/stm32mp151.dtsi +++ b/arch/arm/dts/stm32mp151.dtsi @@ -470,32 +470,36 @@ usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = ; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART2_K>; + wakeup-source; status = "disabled"; }; usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = ; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART3_K>; + wakeup-source; status = "disabled"; }; uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = ; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; + wakeup-source; status = "disabled"; }; uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = ; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART5_K>; + wakeup-source; status = "disabled"; }; @@ -511,6 +515,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -526,6 +531,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -541,6 +547,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -556,6 +563,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -595,16 +603,18 @@ uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = ; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART7_K>; + wakeup-source; status = "disabled"; }; uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = ; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART8_K>; + wakeup-source; status = "disabled"; }; @@ -683,8 +693,9 @@ usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = ; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART6_K>; + wakeup-source; status = "disabled"; }; @@ -1065,7 +1076,7 @@ }; }; - sdmmc3: sdmmc@48004000 { + sdmmc3: mmc@48004000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x48004000 0x400>; @@ -1398,7 +1409,7 @@ status = "disabled"; }; - sdmmc1: sdmmc@58005000 { + sdmmc1: mmc@58005000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58005000 0x1000>; @@ -1413,7 +1424,7 @@ status = "disabled"; }; - sdmmc2: sdmmc@58007000 { + sdmmc2: mmc@58007000 { compatible = "arm,pl18x", "arm,primecell"; arm,primecell-periphid = <0x00253180>; reg = <0x58007000 0x1000>; @@ -1451,11 +1462,13 @@ "mac-clk-tx", "mac-clk-rx", "eth-ck", + "ptp_ref", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1512,6 +1525,7 @@ usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; + #clock-cells = <0>; compatible = "st,stm32mp1-usbphyc"; reg = <0x5a006000 0x1000>; clocks = <&rcc USBPHY_K>; @@ -1534,8 +1548,9 @@ usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = ; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART1_K>; + wakeup-source; status = "disabled"; }; @@ -1565,6 +1580,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1605,6 +1621,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; + i2c-analog-filter; status = "disabled"; };