From: wdenk Date: Fri, 25 Oct 2002 21:08:05 +0000 (+0000) Subject: Initial revision X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7d393aed86972a21d636685d4b280ff5177b481b;p=u-boot.git Initial revision --- diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c new file mode 100644 index 0000000000..81f820a8d4 --- /dev/null +++ b/board/eltec/mhpc/mhpc.c @@ -0,0 +1,477 @@ +/* + * (C) Copyright 2001 + * ELTEC Elektronik AG + * Frank Gottschling + * + * Board specific routines for the miniHiPerCam + * + * - initialisation (eeprom) + * - memory controller + * - serial io initialisation + * - ethernet io initialisation + * + * ----------------------------------------------------------------- + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include +#include +#include +#include "mpc8xx.h" +#include + +/* imports from common/main.c */ +extern char console_buffer[CFG_CBSIZE]; + +extern void eeprom_init (void); +extern int eeprom_read (unsigned dev_addr, unsigned offset, + unsigned char *buffer, unsigned cnt); +extern int eeprom_write (unsigned dev_addr, unsigned offset, + unsigned char *buffer, unsigned cnt); + +/* globals */ +void *video_hw_init(void); +void video_set_lut (unsigned int index, /* color number */ + unsigned char r, /* red */ + unsigned char g, /* green */ + unsigned char b /* blue */ + ); + +GraphicDevice gdev; + +/* locals */ +static void video_circle (char *center, int radius, int color, int pitch); +static void video_test_image (void); +static void video_default_lut (unsigned int clut_type); + +/* revision info foer MHPC EEPROM offset 480 */ +typedef struct { + char board[12]; /* 000 - Board Revision information */ + char sensor; /* 012 - Sensor Type information */ + char serial[8]; /* 013 - Board serial number */ + char etheraddr[6]; /* 021 - Ethernet node addresse */ + char revision[2]; /* 027 - Revision code */ + char option[3]; /* 029 - resevered for options */ +} revinfo; + +/* ------------------------------------------------------------------------- */ + +static const unsigned int sdram_table[] = +{ + /* read single beat cycle */ + 0xef0efc04, 0x0e2dac04, 0x01ba5c04, 0x1ff5fc00, + 0xfffffc05, 0xeffafc34, 0x0ff0bc34, 0x1ff57c35, + + /* read burst cycle */ + 0xef0efc04, 0x0e3dac04, 0x10ff5c04, 0xf0fffc00, + 0xf0fffc00, 0xf1fffc00, 0xfffffc00, 0xfffffc05, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* write single beat cycle */ + 0xef0efc04, 0x0e29ac00, 0x01b25c04, 0x1ff5fc05, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* write burst cycle */ + 0xef0ef804, 0x0e39a000, 0x10f75000, 0xf0fff440, + 0xf0fffc40, 0xf1fffc04, 0xfffffc05, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* periodic timer expired */ + 0xeffebc84, 0x1ffd7c04, 0xfffffc04, 0xfffffc84, + 0xeffebc04, 0x1ffd7c04, 0xfffffc04, 0xfffffc05, + 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04, + + /* exception */ + 0xfffffc04, 0xfffffc05, 0xfffffc04, 0xfffffc04 +}; + +/* ------------------------------------------------------------------------- */ + +int board_pre_init (void) +{ + volatile immap_t *im = (immap_t *)CFG_IMMR; + volatile cpm8xx_t *cp = &(im->im_cpm); + volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport); + + /* reset the port A s.a. cpm-routines */ + ip->iop_padat = 0x0000; + ip->iop_papar = 0x0000; + ip->iop_padir = 0x0800; + ip->iop_paodr = 0x0000; + + /* reset the port B for digital and LCD output */ + cp->cp_pbdat = 0x0300; + cp->cp_pbpar = 0x5001; + cp->cp_pbdir = 0x5301; + cp->cp_pbodr = 0x0000; + + /* reset the port C configured for SMC1 serial port and aqc. control */ + ip->iop_pcdat = 0x0800; + ip->iop_pcpar = 0x0000; + ip->iop_pcdir = 0x0e30; + ip->iop_pcso = 0x0000; + + /* Config port D for LCD output */ + ip->iop_pdpar = 0x1fff; + ip->iop_pddir = 0x1fff; + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity + */ +int checkboard (void) +{ + puts ("Board: ELTEC miniHiperCam\n"); + return(0); +} + +/* ------------------------------------------------------------------------- */ + +int misc_init_r(void) +{ + revinfo mhpcRevInfo; + char nid[32]; + char *mhpcSensorTypes[] = { "OMNIVISON OV7610/7620 color", + "OMNIVISON OV7110 b&w", NULL }; + char hex[23] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, + 0, 0, 0, 0, 10, 11, 12, 13, 14, 15 }; + int i; + + /* check revision data */ + eeprom_read (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32); + + if (strncmp((char *)&mhpcRevInfo.board[2], "MHPC", 4) != 0) + { + printf ("Enter revision number (0-9): %c ", mhpcRevInfo.revision[0]); + if (0 != readline (NULL)) + { + mhpcRevInfo.revision[0] = (char)toupper(console_buffer[0]); + } + + printf ("Enter revision character (A-Z): %c ", mhpcRevInfo.revision[1]); + if (1 == readline (NULL)) + { + mhpcRevInfo.revision[1] = (char)toupper(console_buffer[0]); + } + + printf("Enter board name (V-XXXX-XXXX): %s ", (char *)&mhpcRevInfo.board); + if (11 == readline (NULL)) + { + for (i=0; i<11; i++) + { + mhpcRevInfo.board[i] = (char)toupper(console_buffer[i]); + mhpcRevInfo.board[11] = '\0'; + } + } + + printf("Supported sensor types:\n"); + i=0; + do + { + printf("\n \'%d\' : %s\n", i, mhpcSensorTypes[i]); + } while ( mhpcSensorTypes[++i] != NULL ); + + do + { + printf("\nEnter sensor number (0-255): %d ", (int)mhpcRevInfo.sensor ); + if (0 != readline (NULL)) + { + mhpcRevInfo.sensor = (unsigned char)simple_strtoul(console_buffer, NULL, 10); + } + } while ( mhpcRevInfo.sensor >= i ); + + printf("Enter serial number: %s ", (char *)&mhpcRevInfo.serial ); + if (6 == readline (NULL)) + { + for (i=0; i<6; i++) + { + mhpcRevInfo.serial[i] = console_buffer[i]; + } + mhpcRevInfo.serial[6] = '\0'; + } + + printf("Enter ether node ID with leading zero (HEX): %02x%02x%02x%02x%02x%02x ", + mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], + mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], + mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5] ); + if (12 == readline (NULL)) + { + for (i=0; i<12; i+=2) + { + mhpcRevInfo.etheraddr[i>>1] = (char)(16*hex[toupper(console_buffer[i])-'0'] + + hex[toupper(console_buffer[i+1])-'0']); + } + } + + /* setup new revision data */ + eeprom_write (CFG_I2C_EEPROM_ADDR, 480, (char*)&mhpcRevInfo, 32); + } + + /* set environment */ + sprintf( nid, "%02x:%02x:%02x:%02x:%02x:%02x", + mhpcRevInfo.etheraddr[0], mhpcRevInfo.etheraddr[1], + mhpcRevInfo.etheraddr[2], mhpcRevInfo.etheraddr[3], + mhpcRevInfo.etheraddr[4], mhpcRevInfo.etheraddr[5]); + setenv("ethaddr", nid); + + /* print actual board identification */ + printf("Ident: %s %s Ser %s Rev %c%c\n", + mhpcRevInfo.board, (mhpcRevInfo.sensor==0?"color":"b&w"), + (char *)&mhpcRevInfo.serial, + mhpcRevInfo.revision[0], mhpcRevInfo.revision[1]); + + return (0); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + + upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + + memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mbmr = MAMR_GPL_B4DIS; + memctl->memc_mptpr = MPTPR_PTP_DIV64; + memctl->memc_mar = 0x00008800; + + /* + * Map controller SDRAM bank 0 + */ + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; + udelay(200); + + /* + * Map controller SDRAM bank 1 + */ + memctl->memc_or2 = CFG_OR2; + memctl->memc_br2 = CFG_BR2; + + /* + * Perform SDRAM initializsation sequence + */ + memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ + udelay(1); + memctl->memc_mcr = 0x80002730; /* SDRAM bank 0 - execute twice */ + udelay(1); + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay(10000); + + /* leave place for framebuffers */ + return (SDRAM_MAX_SIZE-SDRAM_RES_SIZE); +} + +/* ------------------------------------------------------------------------- */ + +static void video_circle (char *center, int radius, int color, int pitch) +{ + int x,y,d,dE,dSE; + + x = 0; + y = radius; + d = 1-radius; + dE = 3; + dSE = -2*radius+5; + + *(center+x+y*pitch) = color; + *(center+y+x*pitch) = color; + *(center+y-x*pitch) = color; + *(center+x-y*pitch) = color; + *(center-x-y*pitch) = color; + *(center-y-x*pitch) = color; + *(center-y+x*pitch) = color; + *(center-x+y*pitch) = color; + while(y>x) + { + if (d<0) + { + d += dE; + dE += 2; + dSE += 2; + x++; + } + else + { + d += dSE; + dE += 2; + dSE += 4; + x++; + y--; + } + *(center+x+y*pitch) = color; + *(center+y+x*pitch) = color; + *(center+y-x*pitch) = color; + *(center+x-y*pitch) = color; + *(center-x-y*pitch) = color; + *(center-y-x*pitch) = color; + *(center-y+x*pitch) = color; + *(center-x+y*pitch) = color; + } +} + +/* ------------------------------------------------------------------------- */ + +static void video_test_image(void) +{ + char *di; + int i, n; + + /* draw raster */ + for (i=0; iim_lcd.lcd_lccr = 0x96000866; + + /* config LCD regs. */ + immr->im_lcd.lcd_lcfaa = LCD_VIDEO_ADDR; + immr->im_lcd.lcd_lchcr = 0x010a0093; + immr->im_lcd.lcd_lcvcr = 0x900f0024; + + printf ("Video: 640x480 8Bit Index Lut %s\n", + (clut==1?"240/16 (gray/vga)":"256(gray)")); + + video_default_lut (clut); + + /* clear framebuffer */ + memset ( (char*)(LCD_VIDEO_ADDR), LCD_VIDEO_BG, LCD_VIDEO_ROWS*LCD_VIDEO_COLS ); + + /* enable graphic */ + immr->im_lcd.lcd_lccr = 0x96000867; + + /* fill in Graphic Device */ + gdev.frameAdrs = LCD_VIDEO_ADDR; + gdev.winSizeX = LCD_VIDEO_COLS; + gdev.winSizeY = LCD_VIDEO_ROWS; + gdev.gdfBytesPP = 1; + gdev.gdfIndex = GDF__8BIT_INDEX; + + if (clut > 1) + /* return Graphic Device for console */ + return (void *)&gdev; + else + /* just graphic enabled - draw something beautiful */ + video_test_image(); + + return NULL; /* this disabels cfb - console */ +} + +/* ------------------------------------------------------------------------- */ + +void video_set_lut (unsigned int index, + unsigned char r, unsigned char g, unsigned char b) +{ + unsigned int lum; + unsigned short *pLut = (unsigned short *)(CFG_IMMR + 0x0e00); + + /* 16 bit lut values, 12 bit used, xxxx BBGG RRii iiii */ + /* y = 0.299*R + 0.587*G + 0.114*B */ + lum = (2990*r + 5870*g + 1140*b)/10000; + pLut[index] = ((b & 0xc0)<<4) | ((g & 0xc0)<<2) | (r & 0xc0) | (lum & 0x3f); +} + +/* ------------------------------------------------------------------------- */ diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c new file mode 100644 index 0000000000..87ca6ef4be --- /dev/null +++ b/board/mpl/pip405/pip405.c @@ -0,0 +1,947 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * + * TODO: clean-up + */ + +#include +#include "pip405.h" +#include +#include +#include "../common/isa.h" +#include "../common/common_util.h" + +#undef SDRAM_DEBUG + +#define FALSE 0 +#define TRUE 1 + +/* stdlib.h causes some compatibility problems; should fixe these! -- wd */ +#ifndef __ldiv_t_defined +typedef struct { + long int quot; /* Quotient */ + long int rem; /* Remainder */ +} ldiv_t; +extern ldiv_t ldiv (long int __numer, long int __denom); + +# define __ldiv_t_defined 1 +#endif + + +typedef enum { + SDRAM_NO_ERR, + SDRAM_SPD_COMM_ERR, + SDRAM_SPD_CHKSUM_ERR, + SDRAM_UNSUPPORTED_ERR, + SDRAM_UNKNOWN_ERR +} SDRAM_ERR; + +typedef struct { + const unsigned char mode; + const unsigned char row; + const unsigned char col; + const unsigned char bank; +} SDRAM_SETUP; + +static const SDRAM_SETUP sdram_setup_table[] = { + {1, 11, 9, 2}, + {1, 11, 10, 2}, + {2, 12, 9, 4}, + {2, 12, 10, 4}, + {3, 13, 9, 4}, + {3, 13, 10, 4}, + {3, 13, 11, 4}, + {4, 12, 8, 2}, + {4, 12, 8, 4}, + {5, 11, 8, 2}, + {5, 11, 8, 4}, + {6, 13, 8, 2}, + {6, 13, 8, 4}, + {7, 13, 9, 2}, + {7, 13, 10, 2}, + {0, 0, 0, 0} +}; + +static const unsigned char cal_indextable[] = { + 9, 23, 25 +}; + + +/* + * translate ns.ns/10 coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NS10to10PS (unsigned char spd_byte, unsigned char spd_version) +{ + unsigned short ns, ns10; + + /* isolate upper nibble */ + ns = (spd_byte >> 4) & 0x0F; + /* isolate lower nibble */ + ns10 = (spd_byte & 0x0F); + + return (ns * 100 + ns10 * 10); +} + +/* + * translate ns.ns/4 coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NS4to10PS (unsigned char spd_byte, unsigned char spd_version) +{ + unsigned short ns, ns4; + + /* isolate upper 6 bits */ + ns = (spd_byte >> 2) & 0x3F; + /* isloate lower 2 bits */ + ns4 = (spd_byte & 0x03); + + return (ns * 100 + ns4 * 25); +} + +/* + * translate ns coding of SPD timing values + * into 10 ps unit values + */ + +unsigned short NSto10PS (unsigned char spd_byte) +{ + return (spd_byte * 100); +} + +void SDRAM_err (const char *s) +{ +#ifndef SDRAM_DEBUG + DECLARE_GLOBAL_DATA_PTR; + + (void) get_clocks (); + gd->baudrate = 9600; + serial_init (); +#endif + serial_puts ("\n"); + serial_puts (s); + serial_puts ("\n enable SDRAM_DEBUG for more info\n"); + for (;;); +} + + +#ifdef SDRAM_DEBUG + +void write_hex (unsigned char i) +{ + char cc; + + cc = i >> 4; + cc &= 0xf; + if (cc > 9) + serial_putc (cc + 55); + else + serial_putc (cc + 48); + cc = i & 0xf; + if (cc > 9) + serial_putc (cc + 55); + else + serial_putc (cc + 48); +} + +void write_4hex (unsigned long val) +{ + write_hex ((unsigned char) (val >> 24)); + write_hex ((unsigned char) (val >> 16)); + write_hex ((unsigned char) (val >> 8)); + write_hex ((unsigned char) val); +} + +#endif + +int board_pre_init (void) +{ + unsigned char dataout[1]; + unsigned char datain[128]; + unsigned long sdram_size; + SDRAM_SETUP *t = (SDRAM_SETUP *) sdram_setup_table; + unsigned long memclk; + unsigned long tmemclk = 0; + unsigned long tmp, bank, baseaddr, bank_size; + unsigned short i; + unsigned char rows, cols, banks, sdram_banks, density; + unsigned char supported_cal, trp_clocks, trcd_clocks, tras_clocks, + trc_clocks, tctp_clocks; + unsigned char cal_index, cal_val, spd_version, spd_chksum; + unsigned char buf[8]; +#ifdef SDRAM_DEBUG + DECLARE_GLOBAL_DATA_PTR; +#endif + + memclk = get_bus_freq (tmemclk); + tmemclk = 1000000000 / (memclk / 100); /* in 10 ps units */ + +#ifdef SDRAM_DEBUG + (void) get_clocks (); + gd->baudrate = 9600; + serial_init (); + serial_puts ("\nstart SDRAM Setup\n"); +#endif + + /* Read Serial Presence Detect Information */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + dataout[0] = 0; + for (i = 0; i < 128; i++) + datain[i] = 127; + i2c_read(SPD_EEPROM_ADDRESS,0,1,datain,128); +#ifdef SDRAM_DEBUG + serial_puts ("\ni2c_read returns "); + write_hex (i); + serial_puts ("\n"); +#endif + +#ifdef SDRAM_DEBUG + for (i = 0; i < 128; i++) { + write_hex (datain[i]); + serial_puts (" "); + if (((i + 1) % 16) == 0) + serial_puts ("\n"); + } + serial_puts ("\n"); +#endif + spd_chksum = 0; + for (i = 0; i < 63; i++) { + spd_chksum += datain[i]; + } /* endfor */ + if (datain[63] != spd_chksum) { +#ifdef SDRAM_DEBUG + serial_puts ("SPD chksum: 0x"); + write_hex (datain[63]); + serial_puts (" != calc. chksum: 0x"); + write_hex (spd_chksum); + serial_puts ("\n"); +#endif + SDRAM_err ("SPD checksum Error"); + } + /* SPD seems to be ok, use it */ + + /* get SPD version */ + spd_version = datain[62]; + + /* do some sanity checks on the kind of RAM */ + if ((datain[0] < 0x80) || /* less than 128 valid bytes in SPD */ + (datain[2] != 0x04) || /* if not SDRAM */ + (!((datain[6] == 0x40) || (datain[6] == 0x48))) || /* or not (64 Bit or 72 Bit) */ + (datain[7] != 0x00) || (datain[8] != 0x01) || /* or not LVTTL signal levels */ + (datain[126] == 0x66)) /* or a 66Mhz modules */ + SDRAM_err ("unsupported SDRAM"); +#ifdef SDRAM_DEBUG + serial_puts ("SDRAM sanity ok\n"); +#endif + + /* get number of rows/cols/banks out of byte 3+4+5 */ + rows = datain[3]; + cols = datain[4]; + banks = datain[5]; + + /* get number of SDRAM banks out of byte 17 and + supported CAS latencies out of byte 18 */ + sdram_banks = datain[17]; + supported_cal = datain[18] & ~0x81; + + while (t->mode != 0) { + if ((t->row == rows) && (t->col == cols) + && (t->bank == sdram_banks)) + break; + t++; + } /* endwhile */ + +#ifdef SDRAM_DEBUG + serial_puts ("rows: "); + write_hex (rows); + serial_puts (" cols: "); + write_hex (cols); + serial_puts (" banks: "); + write_hex (banks); + serial_puts (" mode: "); + write_hex (t->mode); + serial_puts ("\n"); +#endif + if (t->mode == 0) + SDRAM_err ("unsupported SDRAM"); + /* get tRP, tRCD, tRAS and density from byte 27+29+30+31 */ +#ifdef SDRAM_DEBUG + serial_puts ("tRP: "); + write_hex (datain[27]); + serial_puts ("\ntRCD: "); + write_hex (datain[29]); + serial_puts ("\ntRAS: "); + write_hex (datain[30]); + serial_puts ("\n"); +#endif + + trp_clocks = (NSto10PS (datain[27]) + (tmemclk - 1)) / tmemclk; + trcd_clocks = (NSto10PS (datain[29]) + (tmemclk - 1)) / tmemclk; + tras_clocks = (NSto10PS (datain[30]) + (tmemclk - 1)) / tmemclk; + density = datain[31]; + + /* trc_clocks is sum of trp_clocks + tras_clocks */ + trc_clocks = trp_clocks + tras_clocks; + /* ctp = ((trp + tras) - trp - trcd) => tras - trcd */ + tctp_clocks = + ((NSto10PS (datain[30]) - NSto10PS (datain[29])) + + (tmemclk - 1)) / tmemclk; + +#ifdef SDRAM_DEBUG + serial_puts ("c_RP: "); + write_hex (trp_clocks); + serial_puts ("\nc_RCD: "); + write_hex (trcd_clocks); + serial_puts ("\nc_RAS: "); + write_hex (tras_clocks); + serial_puts ("\nc_RC: (RP+RAS): "); + write_hex (trc_clocks); + serial_puts ("\nc_CTP: ((RP+RAS)-RP-RCD): "); + write_hex (tctp_clocks); + serial_puts ("\nt_CTP: RAS - RCD: "); + write_hex ((unsigned + char) ((NSto10PS (datain[30]) - + NSto10PS (datain[29])) >> 8)); + write_hex ((unsigned char) (NSto10PS (datain[30]) - NSto10PS (datain[29]))); + serial_puts ("\ntmemclk: "); + write_hex ((unsigned char) (tmemclk >> 8)); + write_hex ((unsigned char) (tmemclk)); + serial_puts ("\n"); +#endif + + + cal_val = 255; + for (i = 6, cal_index = 0; (i > 0) && (cal_index < 3); i--) { + /* is this CAS latency supported ? */ + if ((supported_cal >> i) & 0x01) { + buf[0] = datain[cal_indextable[cal_index]]; + if (cal_index < 2) { + if (NS10to10PS (buf[0], spd_version) <= tmemclk) + cal_val = i; + } else { + /* SPD bytes 25+26 have another format */ + if (NS4to10PS (buf[0], spd_version) <= tmemclk) + cal_val = i; + } /* endif */ + cal_index++; + } /* endif */ + } /* endfor */ +#ifdef SDRAM_DEBUG + serial_puts ("CAL: "); + write_hex (cal_val + 1); + serial_puts ("\n"); +#endif + + if (cal_val == 255) + SDRAM_err ("unsupported SDRAM"); + + /* get SDRAM timing register */ + mtdcr (memcfga, mem_sdtr1); + tmp = mfdcr (memcfgd) & ~0x018FC01F; + /* insert CASL value */ +/* tmp |= ((unsigned long)cal_val) << 23; */ + tmp |= ((unsigned long) cal_val) << 23; + /* insert PTA value */ + tmp |= ((unsigned long) (trp_clocks - 1)) << 18; + /* insert CTP value */ +/* tmp |= ((unsigned long)(trc_clocks - trp_clocks - trcd_clocks - 1)) << 16; */ + tmp |= ((unsigned long) (trc_clocks - trp_clocks - trcd_clocks)) << 16; + /* insert LDF (always 01) */ + tmp |= ((unsigned long) 0x01) << 14; + /* insert RFTA value */ + tmp |= ((unsigned long) (trc_clocks - 4)) << 2; + /* insert RCD value */ + tmp |= ((unsigned long) (trcd_clocks - 1)) << 0; + +#ifdef SDRAM_DEBUG + serial_puts ("sdtr: "); + write_4hex (tmp); + serial_puts ("\n"); +#endif + + /* write SDRAM timing register */ + mtdcr (memcfga, mem_sdtr1); + mtdcr (memcfgd, tmp); + baseaddr = CFG_SDRAM_BASE; + bank_size = (((unsigned long) density) << 22) / 2; + /* insert AM value */ + tmp = ((unsigned long) t->mode - 1) << 13; + /* insert SZ value; */ + switch (bank_size) { + case 0x00400000: + tmp |= ((unsigned long) 0x00) << 17; + break; + case 0x00800000: + tmp |= ((unsigned long) 0x01) << 17; + break; + case 0x01000000: + tmp |= ((unsigned long) 0x02) << 17; + break; + case 0x02000000: + tmp |= ((unsigned long) 0x03) << 17; + break; + case 0x04000000: + tmp |= ((unsigned long) 0x04) << 17; + break; + case 0x08000000: + tmp |= ((unsigned long) 0x05) << 17; + break; + case 0x10000000: + tmp |= ((unsigned long) 0x06) << 17; + break; + default: + SDRAM_err ("unsupported SDRAM"); + } /* endswitch */ + /* get SDRAM bank 0 register */ + mtdcr (memcfga, mem_mb0cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + bank |= (baseaddr | tmp | 0x01); +#ifdef SDRAM_DEBUG + serial_puts ("bank0: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); + serial_puts (" mb0cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + baseaddr += bank_size; + sdram_size += bank_size; + + /* write SDRAM bank 0 register */ + mtdcr (memcfga, mem_mb0cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 1 register */ + mtdcr (memcfga, mem_mb1cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + sdram_size = 0; + +#ifdef SDRAM_DEBUG + serial_puts ("bank1: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); +#endif + if (banks == 2) { + bank |= (baseaddr | tmp | 0x01); + baseaddr += bank_size; + sdram_size += bank_size; + } /* endif */ +#ifdef SDRAM_DEBUG + serial_puts (" mb1cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + /* write SDRAM bank 1 register */ + mtdcr (memcfga, mem_mb1cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 2 register */ + mtdcr (memcfga, mem_mb2cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + + bank |= (baseaddr | tmp | 0x01); + +#ifdef SDRAM_DEBUG + serial_puts ("bank2: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); + serial_puts (" mb2cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + + baseaddr += bank_size; + sdram_size += bank_size; + + /* write SDRAM bank 2 register */ + mtdcr (memcfga, mem_mb2cf); + mtdcr (memcfgd, bank); + + /* get SDRAM bank 3 register */ + mtdcr (memcfga, mem_mb3cf); + bank = mfdcr (memcfgd) & ~0xFFCEE001; + +#ifdef SDRAM_DEBUG + serial_puts ("bank3: baseaddr: "); + write_4hex (baseaddr); + serial_puts (" banksize: "); + write_4hex (bank_size); +#endif + + if (banks == 2) { + bank |= (baseaddr | tmp | 0x01); + baseaddr += bank_size; + sdram_size += bank_size; + } + /* endif */ +#ifdef SDRAM_DEBUG + serial_puts (" mb3cf: "); + write_4hex (bank); + serial_puts ("\n"); +#endif + + /* write SDRAM bank 3 register */ + mtdcr (memcfga, mem_mb3cf); + mtdcr (memcfgd, bank); + + + /* get SDRAM refresh interval register */ + mtdcr (memcfga, mem_rtr); + tmp = mfdcr (memcfgd) & ~0x3FF80000; + + if (tmemclk < NSto10PS (16)) + tmp |= 0x05F00000; + else + tmp |= 0x03F80000; + + /* write SDRAM refresh interval register */ + mtdcr (memcfga, mem_rtr); + mtdcr (memcfgd, tmp); + + /* enable SDRAM controller with no ECC, 32-bit SDRAM width, 16 byte burst */ + mtdcr (memcfga, mem_mcopt1); + tmp = (mfdcr (memcfgd) & ~0xFFE00000) | 0x80E00000; + mtdcr (memcfga, mem_mcopt1); + mtdcr (memcfgd, tmp); + + + + /*-------------------------------------------------------------------------+ + | Interrupt controller setup for the PIP405 board. + | Note: IRQ 0-15 405GP internally generated; active high; level sensitive + | IRQ 16 405GP internally generated; active low; level sensitive + | IRQ 17-24 RESERVED + | IRQ 25 (EXT IRQ 0) SouthBridg; active low; level sensitive + | IRQ 26 (EXT IRQ 1) NMI: active low; level sensitive + | IRQ 27 (EXT IRQ 2) SMI: active Low; level sensitive + | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive + | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive + | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive + | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive + | Note for PIP405 board: + | An interrupt taken for the SouthBridge (IRQ 25) indicates that + | the Interrupt Controller in the South Bridge has caused the + | interrupt. The IC must be read to determine which device + | caused the interrupt. + | + +-------------------------------------------------------------------------*/ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical (for now) */ + mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + return 0; +} + + +/* ------------------------------------------------------------------------- */ + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + unsigned char s[50]; + unsigned char bc; + int i; + backup_t *b = (backup_t *) s; + + puts ("Board: "); + + i = getenv_r ("serial#", s, 32); + if ((i == 0) || strncmp (s, "PIP405", 6)) { + get_backup_values (b); + if (strncmp (b->signature, "MPL\0", 4) != 0) { + puts ("### No HW ID - assuming PIP405"); + } else { + b->serial_name[6] = 0; + printf ("%s SN: %s", b->serial_name, + &b->serial_name[7]); + } + } else { + s[6] = 0; + printf ("%s SN: %s", s, &s[7]); + } + bc = in8 (CONFIG_PORT_ADDR); + printf (" Boot Config: 0x%x\n", bc); + return (0); +} + + +/* ------------------------------------------------------------------------- */ +/* ------------------------------------------------------------------------- */ +/* + initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of + the necessary info for SDRAM controller configuration +*/ +/* ------------------------------------------------------------------------- */ +/* ------------------------------------------------------------------------- */ +static int test_dram (unsigned long ramsize); + +long int initdram (int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned long bank_reg[4], tmp, bank_size; + int i, ds; + unsigned long TotalSize; + + ds = 0; + /* since the DRAM controller is allready set up, + * calculate the size with the bank registers + */ + mtdcr (memcfga, mem_mb0cf); + bank_reg[0] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb1cf); + bank_reg[1] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb2cf); + bank_reg[2] = mfdcr (memcfgd); + mtdcr (memcfga, mem_mb3cf); + bank_reg[3] = mfdcr (memcfgd); + TotalSize = 0; + for (i = 0; i < 4; i++) { + if ((bank_reg[i] & 0x1) == 0x1) { + tmp = (bank_reg[i] >> 17) & 0x7; + bank_size = 4 << tmp; + TotalSize += bank_size; + } else + ds = 1; + } + if (ds == 1) + printf ("single-sided DIMM "); + else + printf ("double-sided DIMM "); + test_dram (TotalSize * 1024 * 1024); + /* bank 2 (SDRAM Clock 2) is not usable if 133MHz SDRAM IF */ + (void) get_clocks(); + if (gd->cpu_clk > 220000000) + TotalSize /= 2; + return (TotalSize * 1024 * 1024); +} + +/* ------------------------------------------------------------------------- */ + + +static int test_dram (unsigned long ramsize) +{ + /* not yet implemented */ + return (1); +} + + +int misc_init_r (void) +{ + return (0); +} + +/*************************************************************************** + * some helping routines + */ + +int overwrite_console (void) +{ + return (in8 (CONFIG_PORT_ADDR) & 0x1); /* return TRUE if console should be overwritten */ +} + + + +extern int isa_init (void); + + +void print_pip405_rev (void) +{ + unsigned char part, vers, cfg; + + part = in8 (PLD_PART_REG); + vers = in8 (PLD_VERS_REG); + cfg = in8 (PLD_BOARD_CFG_REG); + printf ("Rev: PIP405-%d Rev %c PLD%d %d PLD%d %d\n", + 16 - ((cfg >> 4) & 0xf), (cfg & 0xf) + 'A', part & 0xf, + vers & 0xf, (part >> 4) & 0xf, (vers >> 4) & 0xf); +} + +extern void check_env(void); + + +int last_stage_init (void) +{ + print_pip405_rev (); + isa_init (); + show_stdio_dev (); + check_env(); + return 0; +} + +/************************************************************************ +* Print PIP405 Info +************************************************************************/ +void print_pip405_info (void) +{ + unsigned char part, vers, cfg, ledu, sysman, flashcom, can, serpwr, + compwr, nicvga, scsirst; + + part = in8 (PLD_PART_REG); + vers = in8 (PLD_VERS_REG); + cfg = in8 (PLD_BOARD_CFG_REG); + ledu = in8 (PLD_LED_USER_REG); + sysman = in8 (PLD_SYS_MAN_REG); + flashcom = in8 (PLD_FLASH_COM_REG); + can = in8 (PLD_CAN_REG); + serpwr = in8 (PLD_SER_PWR_REG); + compwr = in8 (PLD_COM_PWR_REG); + nicvga = in8 (PLD_NIC_VGA_REG); + scsirst = in8 (PLD_SCSI_RST_REG); + printf ("PLD Part %d version %d\n", + part & 0xf, vers & 0xf); + printf ("PLD Part %d version %d\n", + (part >> 4) & 0xf, (vers >> 4) & 0xf); + printf ("Board Revision %c\n", (cfg & 0xf) + 'A'); + printf ("Population Options %d %d %d %d\n", + (cfg >> 4) & 0x1, (cfg >> 5) & 0x1, + (cfg >> 6) & 0x1, (cfg >> 7) & 0x1); + printf ("User LED0 %s User LED1 %s\n", + ((ledu & 0x1) == 0x1) ? "on" : "off", + ((ledu & 0x2) == 0x2) ? "on" : "off"); + printf ("Additionally Options %d %d\n", + (ledu >> 2) & 0x1, (ledu >> 3) & 0x1); + printf ("User Config Switch %d %d %d %d\n", + (ledu >> 4) & 0x1, (ledu >> 5) & 0x1, + (ledu >> 6) & 0x1, (ledu >> 7) & 0x1); + switch (sysman & 0x3) { + case 0: + printf ("PCI Clocks are running\n"); + break; + case 1: + printf ("PCI Clocks are stopped in POS State\n"); + break; + case 2: + printf ("PCI Clocks are stopped when PCI_STP# is asserted\n"); + break; + case 3: + printf ("PCI Clocks are stopped\n"); + break; + } + switch ((sysman >> 2) & 0x3) { + case 0: + printf ("Main Clocks are running\n"); + break; + case 1: + printf ("Main Clocks are stopped in POS State\n"); + break; + case 2: + case 3: + printf ("PCI Clocks are stopped\n"); + break; + } + printf ("INIT asserts %sINT2# (SMI)\n", + ((sysman & 0x10) == 0x10) ? "" : "not "); + printf ("INIT asserts %sINT1# (NMI)\n", + ((sysman & 0x20) == 0x20) ? "" : "not "); + printf ("INIT occured %d\n", (sysman >> 6) & 0x1); + printf ("SER1 is routed to %s\n", + ((flashcom & 0x1) == 0x1) ? "RS485" : "RS232"); + printf ("COM2 is routed to %s\n", + ((flashcom & 0x2) == 0x2) ? "RS485" : "RS232"); + printf ("RS485 is configured as %s duplex\n", + ((flashcom & 0x4) == 0x4) ? "full" : "half"); + printf ("RS485 is connected to %s\n", + ((flashcom & 0x8) == 0x8) ? "COM1" : "COM2"); + printf ("SER1 uses handshakes %s\n", + ((flashcom & 0x10) == 0x10) ? "DTR/DSR" : "RTS/CTS"); + printf ("Bootflash is %swriteprotected\n", + ((flashcom & 0x20) == 0x20) ? "not " : ""); + printf ("Bootflash VPP is %s\n", + ((flashcom & 0x40) == 0x40) ? "on" : "off"); + printf ("Bootsector is %swriteprotected\n", + ((flashcom & 0x80) == 0x80) ? "not " : ""); + switch ((can) & 0x3) { + case 0: + printf ("CAN Controller is on address 0x1000..0x10FF\n"); + break; + case 1: + printf ("CAN Controller is on address 0x8000..0x80FF\n"); + break; + case 2: + printf ("CAN Controller is on address 0xE000..0xE0FF\n"); + break; + case 3: + printf ("CAN Controller is disabled\n"); + break; + } + switch ((can >> 2) & 0x3) { + case 0: + printf ("CAN Controller Reset is ISA Reset\n"); + break; + case 1: + printf ("CAN Controller Reset is ISA Reset and POS State\n"); + break; + case 2: + case 3: + printf ("CAN Controller is in reset\n"); + break; + } + if (((can >> 4) < 3) || ((can >> 4) == 8) || ((can >> 4) == 13)) + printf ("CAN Interrupt is disabled\n"); + else + printf ("CAN Interrupt is ISA INT%d\n", (can >> 4) & 0xf); + switch (serpwr & 0x3) { + case 0: + printf ("SER0 Drivers are enabled\n"); + break; + case 1: + printf ("SER0 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("SER0 Drivers are disabled\n"); + break; + } + switch ((serpwr >> 2) & 0x3) { + case 0: + printf ("SER1 Drivers are enabled\n"); + break; + case 1: + printf ("SER1 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("SER1 Drivers are disabled\n"); + break; + } + switch (compwr & 0x3) { + case 0: + printf ("COM1 Drivers are enabled\n"); + break; + case 1: + printf ("COM1 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("COM1 Drivers are disabled\n"); + break; + } + switch ((compwr >> 2) & 0x3) { + case 0: + printf ("COM2 Drivers are enabled\n"); + break; + case 1: + printf ("COM2 Drivers are disabled in the POS state\n"); + break; + case 2: + case 3: + printf ("COM2 Drivers are disabled\n"); + break; + } + switch ((nicvga) & 0x3) { + case 0: + printf ("PHY is running\n"); + break; + case 1: + printf ("PHY is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("PHY is in Power save mode\n"); + break; + } + switch ((nicvga >> 2) & 0x3) { + case 0: + printf ("VGA is running\n"); + break; + case 1: + printf ("VGA is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("VGA is in Power save mode\n"); + break; + } + printf ("PHY is %sreseted\n", ((nicvga & 0x10) == 0x10) ? "" : "not "); + printf ("VGA is %sreseted\n", ((nicvga & 0x20) == 0x20) ? "" : "not "); + printf ("Reserved Configuration is %d %d\n", (nicvga >> 6) & 0x1, + (nicvga >> 7) & 0x1); + switch ((scsirst) & 0x3) { + case 0: + printf ("SCSI Controller is running\n"); + break; + case 1: + printf ("SCSI Controller is in Power save mode in POS state\n"); + break; + case 2: + case 3: + printf ("SCSI Controller is in Power save mode\n"); + break; + } + printf ("SCSI termination is %s\n", + ((scsirst & 0x4) == 0x4) ? "disabled" : "enabled"); + printf ("SCSI Controller is %sreseted\n", + ((scsirst & 0x10) == 0x10) ? "" : "not "); + printf ("IDE disks are %sreseted\n", + ((scsirst & 0x20) == 0x20) ? "" : "not "); + printf ("ISA Bus is %sreseted\n", + ((scsirst & 0x40) == 0x40) ? "" : "not "); + printf ("Super IO is %sreseted\n", + ((scsirst & 0x80) == 0x80) ? "" : "not "); +} + +void user_led0 (unsigned char on) +{ + if (on == TRUE) + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x1)); + else + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfe)); +} + +void user_led1 (unsigned char on) +{ + if (on == TRUE) + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) | 0x2)); + else + out8 (PLD_LED_USER_REG, (in8 (PLD_LED_USER_REG) & 0xfd)); +} + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + unsigned char resreg; + + resreg = in8 (PLD_SCSI_RST_REG); + if (idereset == 1) + resreg |= 0x20; + else { + udelay(10000); + resreg &= 0xdf; + } + out8 (PLD_SCSI_RST_REG, resreg); +} + + diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h new file mode 100644 index 0000000000..1dd7f3a4a1 --- /dev/null +++ b/include/configs/MIP405.h @@ -0,0 +1,376 @@ +/* + * (C) Copyright 2001, 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*********************************************************** + * High Level Configuration Options + * (easy to change) + ***********************************************************/ +#define CONFIG_405GP 1 /* This is a PPC405 CPU */ +#define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_MIP405 1 /* ...on a MIP405 board */ +/*********************************************************** + * Clock + ***********************************************************/ +#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ + +/*********************************************************** + * Command definitions + ***********************************************************/ +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_IDE | \ + CFG_CMD_DHCP | \ + CFG_CMD_CACHE | \ + CFG_CMD_PCI | \ + CFG_CMD_IRQ | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DATE | \ + CFG_CMD_ELF | \ + CFG_CMD_USB | \ + CFG_CMD_MII | \ + CFG_CMD_DOC | \ + CFG_CMD_SAVES | \ + CFG_CMD_BSP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +/************************************************************** + * I2C Stuff: + * the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address + * 0x53. + * The Atmel EEPROM uses 16Bit addressing. + ***************************************************************/ + +#define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CFG_I2C_SPEED 50000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM 24C128/256 */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#undef CFG_I2C_EEPROM_ADDR_OVERFLOW +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */ + /* 64 byte page write mode using*/ + /* last 6 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* enable Page write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + + +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */ +#define CFG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */ + +/*************************************************************** + * Definitions for Serial Presence Detect EEPROM address + * (to get SDRAM settings) + ***************************************************************/ +#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0 +#define SDRAM_EEPROM_READ_ADDRESS 0xA1 + +/************************************************************** + * Environment definitions + **************************************************************/ +#define CONFIG_BAUDRATE 9600 /* STD Baudrate */ +#define CONFIG_BOOTDELAY 5 +/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */ +#define CONFIG_BOOT_RETRY_TIME -10 /* feature is avaiable but not enabled */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */ + +#define CONFIG_BOOTCOMMAND "diskboot 200000 0:1; bootm" /* autoboot command */ +#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */ + +#define CONFIG_IPADDR 10.0.0.100 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_PREBOOT +/*************************************************************** + * defines if the console is stored in the environment + ***************************************************************/ +#define CFG_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */ +/*************************************************************** + * defines if an overwrite_console function exists + *************************************************************/ +#define CFG_CONSOLE_OVERWRITE_ROUTINE +#define CFG_CONSOLE_INFO_QUIET +/*************************************************************** + * defines if the overwrite_console should be stored in the + * environment + **************************************************************/ +#undef CFG_CONSOLE_ENV_OVERWRITE + +/************************************************************** + * loads config + *************************************************************/ +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MISC_INIT_R +/*********************************************************** + * Miscellaneous configurable options + **********************************************************/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ + +#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */ +#define CFG_BASE_BAUD 916667 + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ + 57600, 115200, 230400, 460800, 921600 } + +#define CFG_LOAD_ADDR 0x200000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */ +#define CONFIG_PCI_PNP /* pci plug-and-play */ + /* resource configuration */ +#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFF80000 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For IBM 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Init Memory Controller: + */ + +#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ + +#define CONFIG_BOARD_PRE_INIT + +/* Peripheral Bus Mapping */ +#define PER_PLD_ADDR 0xF4000000 /* smallest window is 1MByte 0x10 0000*/ +#define PER_UART0_ADDR 0xF4100000 /* smallest window is 1MByte 0x10 0000*/ +#define PER_UART1_ADDR 0xF4200000 /* smallest window is 1MByte 0x10 0000*/ + +#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000 +#define CONFIG_PORT_ADDR PER_PLD_ADDR + 5 + + + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in On Chip SRAM) + */ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR 0xF0000000 +#define CFG_OCM_DATA_SIZE 0x1000 +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of On Chip SRAM */ +#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of On Chip SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + + +/*********************************************************************** + * External peripheral base address + ***********************************************************************/ +#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000 + +/*********************************************************************** + * Last Stage Init + ***********************************************************************/ +#define CONFIG_LAST_STAGE_INIT +/************************************************************ + * Ethernet Stuff + ***********************************************************/ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ + +/************************************************************ + * RTC + ***********************************************************/ +#define CONFIG_RTC_MC146818 +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/************************************************************ + * IDE/ATA stuff + ************************************************************/ +#define CFG_IDE_MAXBUS 2 /* max. 2 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR CFG_ISA_IO_BASE_ADDRESS /* base address */ +#define CFG_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ +#define CFG_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */ +#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ + +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET /* reset for ide supported... */ +#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */ + +/************************************************************ + * ATAPI support (experimental) + ************************************************************/ +#define CONFIG_ATAPI /* enable ATAPI Support */ + +/************************************************************ + * SCSI support (experimental) only SYM53C8xx supported + ************************************************************/ +#undef CONFIG_SCSI_SYM53C8XX + +#ifdef CONFIG_SCSI_SYM53C8XX +#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */ +#define CFG_SCSI_MAX_SCSI_ID 7 /* maximum SCSI ID (0..6) */ +#define CFG_SCSI_MAX_DEVICE CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN /* maximum Target devices */ +#define CFG_SCSI_SPIN_UP_TIME 2 +#endif /* CONFIG_SCSI_SYM53C8XX */ +/************************************************************ + * DISK Partition support + ************************************************************/ +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION /* Experimental */ + +/************************************************************ + * Disk-On-Chip configuration + ************************************************************/ +#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ +#define CFG_DOC_SHORT_TIMEOUT +#define CFG_DOC_SUPPORT_2000 +#define CFG_DOC_SUPPORT_MILLENNIUM +/************************************************************ + * Keyboard support + ************************************************************/ +#undef CONFIG_ISA_KEYBOARD + +/************************************************************ + * Video support + ************************************************************/ +#define CONFIG_VIDEO /*To enable video controller support */ +#define CONFIG_VIDEO_CT69000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#undef CONFIG_VIDEO_ONBOARD +/************************************************************ + * USB support EXPERIMENTAL + ************************************************************/ +#define CONFIG_USB_UHCI +#define CONFIG_USB_KEYBOARD +#define CONFIG_USB_STORAGE + +/* Enable needed helper functions */ +#define CFG_DEVICE_DEREGISTER /* needs device_deregister */ + +/************************************************************ + * Debug support + ************************************************************/ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/************************************************************ + * Ident + ************************************************************/ +#define VERSION_TAG "released" +#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10072-001 " VERSION_TAG + + +#endif /* __CONFIG_H */