From: Ben Gardiner Date: Tue, 11 Jan 2011 19:48:17 +0000 (-0500) Subject: ea20: fix undefined PHY_* errors X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7d2fade7b1cd08432d16f7af5b10a8d1c0213813;p=u-boot.git ea20: fix undefined PHY_* errors This patch fixes ea20 after 8ef583a0351590a91394499eb5ca2ab8a703d959 where the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_ definitions except in the RMII support for davinci_emac. Probably also due to the merge path of changes in 2010.12. Signed-off-by: Ben Gardiner CC: Mike Frysinger Acked-by: Mike Frysinger --- diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index c359f54f9d..66c0d13c2b 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -247,10 +247,10 @@ static int gen_get_link_speed(int phy_addr) (tmp & 0x04)) { #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \ defined(CONFIG_MACH_DAVINCI_DA850_EVM) - davinci_eth_phy_read(phy_addr, PHY_ANLPAR, &tmp); + davinci_eth_phy_read(phy_addr, MII_LPA, &tmp); /* Speed doesn't matter, there is no setting for it in EMAC. */ - if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_10FD)) { + if (tmp & (LPA_100FULL | LPA_10FULL)) { /* set EMAC for Full Duplex */ writel(EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE, @@ -261,7 +261,7 @@ static int gen_get_link_speed(int phy_addr) &adap_emac->MACCONTROL); } - if (tmp & (PHY_ANLPAR_TXFD | PHY_ANLPAR_TX)) + if (tmp & (LPA_100FULL | LPA_100HALF)) writel(readl(&adap_emac->MACCONTROL) | EMAC_MACCONTROL_RMIISPEED_100, &adap_emac->MACCONTROL);