From: Shawn Guo Date: Wed, 20 Mar 2019 07:32:41 +0000 (+0800) Subject: poplar: enable Ethernet driver support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7c798a11d499dbf5c1c12eedec6bd7299b906b2b;p=u-boot.git poplar: enable Ethernet driver support The 'phy' reset of gmac device in kernel device tree is not generic enough for u-boot to use, so we need to overwrite the 'resets' property as needed. With this device tree fixup and poplar_defconfig changes, Ethernet starts working on Poplar board. Signed-off-by: Shawn Guo Acked-by: Joe Hershberger --- diff --git a/arch/arm/dts/hi3798cv200-u-boot.dtsi b/arch/arm/dts/hi3798cv200-u-boot.dtsi index 7844c5208c..2de06d9529 100644 --- a/arch/arm/dts/hi3798cv200-u-boot.dtsi +++ b/arch/arm/dts/hi3798cv200-u-boot.dtsi @@ -8,7 +8,15 @@ * (C) Copyright 2017 Jorge Ramirez-Ortiz */ +#include + &soc { + rst: reset-controller@8a22000 { + compatible = "hisilicon,hi3798cv200-reset"; + reg = <0x8a22000 0x1000>; + #reset-cells = <3>; + }; + usb2: ehci@9890000 { compatible = "generic-ehci"; reg = <0x9890000 0x100>; @@ -16,6 +24,12 @@ }; }; +&gmac1 { + resets = <&rst 0xcc 9 ASSERT_SET>, + <&rst 0xcc 11 ASSERT_SET>, + <&rst 0xcc 13 DEASSERT_SET>; +}; + &uart0 { clock = <75000000>; status = "okay"; diff --git a/configs/poplar_defconfig b/configs/poplar_defconfig index 81bd3702e4..76ab5eb70e 100644 --- a/configs/poplar_defconfig +++ b/configs/poplar_defconfig @@ -19,6 +19,9 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0 CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_K3=y +CONFIG_DM_ETH=y +CONFIG_HIGMACV300_ETH=y +CONFIG_RESET_HISILICON=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y