From: Billy Tsai Date: Tue, 20 Aug 2024 07:27:36 +0000 (+0800) Subject: gpio: Add G7 Aspeed gpio controller driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7c2c235a27c7b7198742f37fbe20877e17b6e3ea;p=u-boot.git gpio: Add G7 Aspeed gpio controller driver In the 7th generation of the SoC from Aspeed, the control logic of the GPIO controller has been updated to support per-pin control. Each pin now has its own 32-bit register, allowing for individual control of the pin’s value, direction, interrupt type, and other settings. Signed-off-by: Billy Tsai --- diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d735877cd9..3996333fe8 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -157,6 +157,13 @@ config ASPEED_GPIO is found in the AST2400, AST2500 and AST2600 BMC SoCs and provides access to over 200 GPIOs on each chip. +config ASPEED_G7_GPIO + bool "Aspeed G7 GPIO Driver" + help + Say yes here to support the Aspeed G7 GPIO driver. The controller + is found in the AST2700 BMC SoCs and provides access to over 200 + GPIOs on each chip. + config DA8XX_GPIO bool "DA8xx GPIO Driver" help diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index cc54df4046..da0faf0524 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o obj-$(CONFIG_$(SPL_)DM_PCA953X) += pca953x_gpio.o obj-$(CONFIG_ASPEED_GPIO) += gpio-aspeed.o +obj-$(CONFIG_ASPEED_G7_GPIO) += gpio-aspeed-g7.o obj-$(CONFIG_AT91_GPIO) += at91_gpio.o obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o obj-$(CONFIG_BCM6345_GPIO) += bcm6345_gpio.o diff --git a/drivers/gpio/gpio-aspeed-g7.c b/drivers/gpio/gpio-aspeed-g7.c new file mode 100644 index 0000000000..4c6ab86203 --- /dev/null +++ b/drivers/gpio/gpio-aspeed-g7.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) ASPEED Technology Inc. + * Billy Tsai + */ +#include +#include + +#include +#include +#include +#include +#include +#include + +struct aspeed_gpio_priv { + void *regs; +}; + +#define GPIO_G7_IRQ_STS_BASE 0x100 +#define GPIO_G7_IRQ_STS_OFFSET(x) (GPIO_G7_IRQ_STS_BASE + (x) * 0x4) +#define GPIO_G7_CTRL_REG_BASE 0x180 +#define GPIO_G7_CTRL_REG_OFFSET(x) (GPIO_G7_CTRL_REG_BASE + (x) * 0x4) +#define GPIO_G7_OUT_DATA BIT(0) +#define GPIO_G7_DIR BIT(1) +#define GPIO_G7_IRQ_EN BIT(2) +#define GPIO_G7_IRQ_TYPE0 BIT(3) +#define GPIO_G7_IRQ_TYPE1 BIT(4) +#define GPIO_G7_IRQ_TYPE2 BIT(5) +#define GPIO_G7_RST_TOLERANCE BIT(6) +#define GPIO_G7_DEBOUNCE_SEL GENMASK(8, 7) +#define GPIO_G7_INPUT_MASK BIT(9) +#define GPIO_G7_IRQ_STS BIT(12) +#define GPIO_G7_IN_DATA BIT(13) +/* + * The configuration of the following registers should be determined + * outside of the GPIO driver. + */ +#define GPIO_G7_PRIVILEGE_W_REG_BASE 0x810 +#define GPIO_G7_PRIVILEGE_W_REG_OFFSET(x) (GPIO_G7_PRIVILEGE_W_REG_BASE + ((x) >> 2) * 0x4) +#define GPIO_G7_PRIVILEGE_R_REG_BASE 0x910 +#define GPIO_G7_PRIVILEGE_R_REG_OFFSET(x) (GPIO_G7_PRIVILEGE_R_REG_BASE + ((x) >> 2) * 0x4) +#define GPIO_G7_IRQ_TARGET_REG_BASE 0xA10 +#define GPIO_G7_IRQ_TARGET_REG_OFFSET(x) (GPIO_G7_IRQ_TARGET_REG_BASE + ((x) >> 2) * 0x4) +#define GPIO_G7_IRQ_TO_INTC2_18 BIT(0) +#define GPIO_G7_IRQ_TO_INTC2_19 BIT(1) +#define GPIO_G7_IRQ_TO_INTC2_20 BIT(2) +#define GPIO_G7_IRQ_TO_SIO BIT(3) +#define GPIO_G7_IRQ_TARGET_RESET_TOLERANCE BIT(6) +#define GPIO_G7_IRQ_TARGET_W_PROTECT BIT(7) + +static int +aspeed_gpio_direction_input(struct udevice *dev, unsigned int offset) +{ + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + void __iomem *addr = priv->regs + GPIO_G7_CTRL_REG_OFFSET(offset); + u32 dir = readl(addr); + + dir &= ~GPIO_G7_DIR; + writel(dir, addr); + + return 0; +} + +static int aspeed_gpio_direction_output(struct udevice *dev, unsigned int offset, + int value) +{ + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + void __iomem *addr = priv->regs + GPIO_G7_CTRL_REG_OFFSET(offset); + u32 data = readl(addr); + + if (value) + data |= GPIO_G7_OUT_DATA; + else + data &= ~GPIO_G7_OUT_DATA; + writel(data, addr); + data |= GPIO_G7_DIR; + writel(data, addr); + + return 0; +} + +static int aspeed_gpio_get_value(struct udevice *dev, unsigned int offset) +{ + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + void __iomem *addr = priv->regs + GPIO_G7_CTRL_REG_OFFSET(offset); + + return !!(readl(addr) & GPIO_G7_IN_DATA); +} + +static int +aspeed_gpio_set_value(struct udevice *dev, unsigned int offset, int value) +{ + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + void __iomem *addr = priv->regs + GPIO_G7_CTRL_REG_OFFSET(offset); + u32 data = readl(addr); + + if (value) + data |= GPIO_G7_OUT_DATA; + else + data &= ~GPIO_G7_OUT_DATA; + + writel(data, addr); + + return 0; +} + +static int aspeed_gpio_get_function(struct udevice *dev, unsigned int offset) +{ + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + void __iomem *addr = priv->regs + GPIO_G7_CTRL_REG_OFFSET(offset); + + if (readl(addr) & GPIO_G7_DIR) + return GPIOF_OUTPUT; + + return GPIOF_INPUT; +} + +static const struct dm_gpio_ops aspeed_gpio_ops = { + .direction_input = aspeed_gpio_direction_input, + .direction_output = aspeed_gpio_direction_output, + .get_value = aspeed_gpio_get_value, + .set_value = aspeed_gpio_set_value, + .get_function = aspeed_gpio_get_function, +}; + +static int aspeed_gpio_probe(struct udevice *dev) +{ + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct aspeed_gpio_priv *priv = dev_get_priv(dev); + + uc_priv->bank_name = dev->name; + ofnode_read_u32(dev_ofnode(dev), "ngpios", &uc_priv->gpio_count); + priv->regs = devfdt_get_addr_ptr(dev); + + return 0; +} + +static const struct udevice_id aspeed_gpio_ids[] = { + { .compatible = "aspeed,ast2700-gpio", }, + { } +}; + +U_BOOT_DRIVER(gpio_aspeed) = { + .name = "gpio-aspeed", + .id = UCLASS_GPIO, + .of_match = aspeed_gpio_ids, + .ops = &aspeed_gpio_ops, + .probe = aspeed_gpio_probe, + .priv_auto = sizeof(struct aspeed_gpio_priv), +};