From: Holger Brunck Date: Tue, 9 Jul 2019 07:30:29 +0000 (+0200) Subject: powerpc/km: remove unmaintained target KMVECT1 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7b472733d880ea7957537b566c0251ffdc5cb8d0;p=u-boot.git powerpc/km: remove unmaintained target KMVECT1 Signed-off-by: Valentin Longchamp Signed-off-by: Holger Brunck Signed-off-by: Stefan Roese --- diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 3f68b6f645..72053ceab4 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -110,10 +110,6 @@ config TARGET_SUVD3 bool "Support suvd3" select VENDOR_KM -config TARGET_KMVECT1 - bool "Support kmvect1" - select VENDOR_KM - config TARGET_KMTEGR1 bool "Support kmtegr1" select VENDOR_KM diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index 23bd21c4bc..d22f3fa75a 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -310,11 +310,6 @@ static int ivm_populate_env(unsigned char *buf, int len) /* if an offset is defined, add it */ process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true); env_set((char *)"ethaddr", (char *)valbuf); -#ifdef CONFIG_KMVECT1 -/* KMVECT1 has two ethernet interfaces */ - process_mac(valbuf, page2, 1, true); - env_set((char *)"eth1addr", (char *)valbuf); -#endif #else /* KMTEGR1 has a special setup. eth0 has no connection to the outside and * gets an locally administred MAC address, eth1 is the debug interface and diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index 0a41be57f5..1011cc8b2c 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -38,25 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy endif -if TARGET_KMVECT1 - -config SYS_BOARD - default "km83xx" - -config SYS_VENDOR - default "keymile" - -config SYS_CONFIG_NAME - default "kmvect1" - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select ARCH_MPC8309 - imply CMD_CRAMFS - imply FS_CRAMFS - -endif - if TARGET_KMTEGR1 config SYS_BOARD diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS index 94e0d572e2..d2af983073 100644 --- a/board/keymile/km83xx/MAINTAINERS +++ b/board/keymile/km83xx/MAINTAINERS @@ -10,7 +10,6 @@ F: configs/kmopti2_defconfig F: configs/kmtepr2_defconfig F: include/configs/suvd3.h F: configs/kmtegr1_defconfig -F: configs/kmvect1_defconfig F: configs/suvd3_defconfig F: configs/tuge1_defconfig F: configs/tuxx1_defconfig diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 880ce67fa6..a693845383 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -124,19 +124,10 @@ static int piggy_present(void) return in_8(&base->bprth) & PIGGY_PRESENT; } -#if defined(CONFIG_KMVECT1) -int ethernet_present(void) -{ - /* ethernet port connected to simple switch without piggy */ - return 1; -} -#else int ethernet_present(void) { return piggy_present(); } -#endif - int board_early_init_r(void) { @@ -197,80 +188,8 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_KMVECT1) -#include -/* Marvell MV88E6122 switch configuration */ -static struct mv88e_sw_reg extsw_conf[] = { - /* port 1, FRONT_MDI, autoneg */ - { PORT(1), PORT_PHY, NO_SPEED_FOR }, - { PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - { PHY(1), PHY_1000_CTRL, NO_ADV }, - { PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN }, - { PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST | - FULL_DUPLEX }, - /* port 2, unused */ - { PORT(2), PORT_CTRL, PORT_DIS }, - { PHY(2), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 3, BP_MII (CPU), PHY mode, 100BASE */ - { PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */ - { PORT(4), PORT_STATUS, NO_PHY_DETECT }, - { PORT(4), PORT_PHY, SPEED_1000_FOR }, - { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */ - { PORT(5), PORT_STATUS, NO_PHY_DETECT }, - { PORT(5), PORT_PHY, SPEED_1000_FOR }, - { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* - * Errata Fix: 1.9V Output from Internal 1.8V Regulator, - * acc . MV-S300889-00D.pdf , clause 4.5 - */ - { PORT(5), 0x1A, 0xADB1 }, - /* port 6, unused, this port has no phy */ - { PORT(6), PORT_CTRL, PORT_DIS }, - /* - * Errata Fix: 1.9V Output from Internal 1.8V Regulator, - * acc . MV-S300889-00D.pdf , clause 4.5 - */ - { PORT(5), 0x1A, 0xADB1 }, -}; -#endif - int last_stage_init(void) { -#if defined(CONFIG_KMVECT1) - struct km_bec_fpga __iomem *base = - (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; - u8 tmp_reg; - - /* Release mv88e6122 from reset */ - tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */ - out_8(&base->res1[0], tmp_reg); /* GP28 as output */ - tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */ - out_8(&base->gprt3, tmp_reg); - - /* configure MV88E6122 switch */ - char *name = "UEC2"; - - if (miiphy_set_current_dev(name)) - return 0; - - mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf, - ARRAY_SIZE(extsw_conf)); - - mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); - - if (piggy_present()) { - env_set("ethact", "UEC2"); - env_set("netdev", "eth1"); - puts("using PIGGY for network boot\n"); - } else { - env_set("netdev", "eth0"); - puts("using frontport for network boot\n"); - } -#endif - #if defined(CONFIG_TARGET_KMCOGE5NE) struct bfticu_iomap *base = (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE; diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig deleted file mode 100644 index 890c4138ec..0000000000 --- a/configs/kmvect1_defconfig +++ /dev/null @@ -1,181 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xF0000000 -CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 -CONFIG_SYS_CLK_FREQ=66000000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_KMVECT1=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_QUICC_MULT_FACTOR_3=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_INHIBITED=y -CONFIG_BAT0_ICACHE_GUARDED=y -CONFIG_BAT0_DCACHE_INHIBITED=y -CONFIG_BAT0_DCACHE_GUARDED=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_4_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="KMBEC_FPGA" -CONFIG_BAT2_BASE=0xE8000000 -CONFIG_BAT2_LENGTH_128_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="FLASH" -CONFIG_BAT3_BASE=0xF0000000 -CONFIG_BAT3_LENGTH_256_MBYTES=y -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT3_DCACHE_INHIBITED=y -CONFIG_BAT3_DCACHE_GUARDED=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_BAT4=y -CONFIG_BAT4_NAME="STACK_IN_DCACHE" -CONFIG_BAT4_BASE=0xE6000000 -CONFIG_BAT4_ACCESS_RW=y -CONFIG_BAT4_USER_MODE_VALID=y -CONFIG_BAT4_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="APP1" -CONFIG_BAT5_BASE=0xA0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="APP2" -CONFIG_BAT6_BASE=0xB0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_INHIBITED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xF0000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_256_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE8000000 -CONFIG_LBLAW1_NAME="KMBEC_FPGA" -CONFIG_LBLAW1_LENGTH_128_MBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xA0000000 -CONFIG_LBLAW2_NAME="APP1" -CONFIG_LBLAW2_LENGTH_256_MBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xB0000000 -CONFIG_LBLAW3_NAME="APP2" -CONFIG_LBLAW3_LENGTH_256_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xF0000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_256_MBYTES=y -CONFIG_OR0_SCY_5=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="KMBEC_FPGA" -CONFIG_BR1_OR1_BASE=0xE8000000 -CONFIG_OR1_AM_128_MBYTES=y -CONFIG_OR1_SCY_2=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR1_TRLX_RELAXED=y -CONFIG_OR1_EAD_EXTRA=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="APP1" -CONFIG_BR2_OR2_BASE=0xA0000000 -CONFIG_BR2_PORTSIZE_16BIT=y -CONFIG_BR2_MACHINE_UPMA=y -CONFIG_OR2_AM_256_MBYTES=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="APP2" -CONFIG_BR3_OR3_BASE=0xB0000000 -CONFIG_BR3_PORTSIZE_16BIT=y -CONFIG_OR3_AM_256_MBYTES=y -CONFIG_OR3_SCY_3=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_ACR_APARK_MASTER=y -CONFIG_ACR_PARKM_USB_I2C1_BOOT=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMVECT1" -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=boot" -CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),128k(env),128k(envred),-(ubi0);" -CONFIG_CMD_DIAG=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_MTD_DEVICE=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_MV88E6352_SWITCH=y -# CONFIG_PCI is not set -CONFIG_QE=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h deleted file mode 100644 index 4a3064d87f..0000000000 --- a/include/configs/kmvect1.h +++ /dev/null @@ -1,56 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_HOSTNAME "kmvect1" -#define CONFIG_KM_BOARD_NAME "kmvect1" -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 - -/* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" -#include "km/km-mpc83xx.h" -#include "km/km-mpc8309.h" - -#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ - 0x0000c000 | \ - MxMR_WLFx_2X) - -/* ethernet port connected to simple switch 88e6122 (UEC0) */ -#define CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 - -#define CONFIG_FIXED_PHY 0xFFFFFFFF -#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ -#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ - {devnum, speed, duplex} -#define CONFIG_SYS_FIXED_PHY_PORTS \ - CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) - -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 - -#endif /* __CONFIG_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 2c209dbf7e..21d71488c9 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -949,7 +949,6 @@ CONFIG_KMCOGE4 CONFIG_KMLION1 CONFIG_KMP204X CONFIG_KMTEGR1 -CONFIG_KMVECT1 CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_BOARD_NAME CONFIG_KM_COGE5UN