From: Fabio Estevam Date: Thu, 19 Dec 2019 17:59:41 +0000 (-0300) Subject: pfuze: Fix the pmic_get() parameter in the DM case X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7ab832e409258ec3ff6b024815baa02eac71a0e6;p=u-boot.git pfuze: Fix the pmic_get() parameter in the DM case Currently the following hang is observed when booting a imx6sx-sdb board: U-Boot 2020.01-rc5-00004-g643366bcd5 (Dec 19 2019 - 14:56:23 -0300) CPU: Freescale i.MX6SX rev1.0 996 MHz (running at 792 MHz) CPU: Extended Commercial temperature grade (-20C to 105C) at 32C Reset cause: POR Model: Freescale i.MX6 SoloX SDB RevB Board Board: MX6SX SABRE SDB revA DRAM: 1 GiB initcall sequence bffd8514 failed at call 87804cc0 (err=-19) ### ERROR ### Please RESET the board ### When pmic_get() is used with DM the first parameter must be the complete node name plus the unit address. Fix the pmic_get() parameter to fix the boot regression. Tested on a imx6sx-sdb and imx6q-sabresd boards. Signed-off-by: Fabio Estevam Reviewed-by: Igor Opaniuk --- diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c index 03ebe4e7b5..6dca22960b 100644 --- a/board/freescale/common/pfuze.c +++ b/board/freescale/common/pfuze.c @@ -136,7 +136,7 @@ struct udevice *pfuze_common_init(void) int ret; unsigned int reg, dev_id, rev_id; - ret = pmic_get("pfuze100", &dev); + ret = pmic_get("pfuze100@8", &dev); if (ret == -ENODEV) return NULL;