From: Calvin Johnson Date: Thu, 8 Mar 2018 10:00:28 +0000 (+0530) Subject: board: freescale: ls1012aqds: enable network support on ls1012aqds X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7a8df8ba33969438dd61ca41b5006f6e434e8061;p=u-boot.git board: freescale: ls1012aqds: enable network support on ls1012aqds This patch enables ethernet support for ls1012aqds. Signed-off-by: Calvin Johnson Signed-off-by: Anjaneyulu Jagarlmudi Acked-by: Joe Hershberger --- diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig index fc9250b253..c0b12ed78f 100644 --- a/board/freescale/ls1012aqds/Kconfig +++ b/board/freescale/ls1012aqds/Kconfig @@ -12,6 +12,51 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012aqds" + +if FSL_PFE + +config BOARD_SPECIFIC_OPTIONS # dummy + def_bool y + select PHYLIB + imply PHY_VITESSE + imply PHY_REALTEK + imply PHY_AQUANTIA + imply PHYLIB_10G + +config PFE_RGMII_RESET_WA + def_bool y + +config SYS_LS_PFE_FW_ADDR + hex "Flash address of PFE firmware" + default 0x40a00000 + +config DDR_PFE_PHYS_BASEADDR + hex "PFE DDR physical base address" + default 0x03800000 + +config DDR_PFE_BASEADDR + hex "PFE DDR base address" + default 0x83800000 + +config PFE_EMAC1_PHY_ADDR + hex "PFE DDR base address" + default 0x1e + +config PFE_EMAC2_PHY_ADDR + hex "PFE DDR base address" + default 0x1 + +config PFE_SGMII_2500_PHY1_ADDR + hex "PFE DDR base address" + default 0x1 + +config PFE_SGMII_2500_PHY2_ADDR + hex "PFE DDR base address" + default 0x2 + +endif + + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1012aqds/Makefile b/board/freescale/ls1012aqds/Makefile index 0b813f9784..5aba9caf92 100644 --- a/board/freescale/ls1012aqds/Makefile +++ b/board/freescale/ls1012aqds/Makefile @@ -5,3 +5,4 @@ # obj-y += ls1012aqds.o +obj-$(CONFIG_FSL_PFE) += eth.o diff --git a/board/freescale/ls1012aqds/eth.c b/board/freescale/ls1012aqds/eth.c new file mode 100644 index 0000000000..f8026a21a1 --- /dev/null +++ b/board/freescale/ls1012aqds/eth.c @@ -0,0 +1,309 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../common/qixis.h" +#include +#include +#include "ls1012aqds_qixis.h" + +#define EMI_NONE 0xFF +#define EMI1_RGMII 1 +#define EMI1_SLOT1 2 +#define EMI1_SLOT2 3 + +#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO" +#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1" + +static const char * const mdio_names[] = { + "NULL", + "LS1012AQDS_MDIO_RGMII", + "LS1012AQDS_MDIO_SLOT1", + "LS1012AQDS_MDIO_SLOT2", + "NULL", +}; + +static const char *ls1012aqds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct ls1012aqds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void ls1012aqds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + + if (muxval < 7) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int ls1012aqds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct ls1012aqds_mdio *priv = bus->priv; + + ls1012aqds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int ls1012aqds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct ls1012aqds_mdio *priv = bus->priv; + + ls1012aqds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int ls1012aqds_mdio_reset(struct mii_dev *bus) +{ + struct ls1012aqds_mdio *priv = bus->priv; + + if (priv->realbus->reset) + return priv->realbus->reset(priv->realbus); + else + return -1; +} + +static int ls1012aqds_mdio_init(char *realbusname, u8 muxval) +{ + struct ls1012aqds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate ls1012aqds MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate ls1012aqds private data\n"); + free(bus); + return -1; + } + + bus->read = ls1012aqds_mdio_read; + bus->write = ls1012aqds_mdio_write; + bus->reset = ls1012aqds_mdio_reset; + sprintf(bus->name, ls1012aqds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + return mdio_register(bus); +} + +int pfe_eth_board_init(struct udevice *dev) +{ + static int init_done; + struct mii_dev *bus; + static const char *mdio_name; + struct pfe_mdio_info mac_mdio_info; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + u8 data8; + struct pfe_eth_dev *priv = dev_get_priv(dev); + + int srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; + + ls1012aqds_mux_mdio(EMI1_SLOT1); + + if (!init_done) { + mac_mdio_info.reg_base = (void *)EMAC1_BASE_ADDR; + mac_mdio_info.name = DEFAULT_PFE_MDIO_NAME; + + bus = pfe_mdio_init(&mac_mdio_info); + if (!bus) { + printf("Failed to register mdio\n"); + return -1; + } + init_done = 1; + } + + if (priv->gemac_port) { + mac_mdio_info.reg_base = (void *)EMAC2_BASE_ADDR; + mac_mdio_info.name = DEFAULT_PFE_MDIO1_NAME; + + bus = pfe_mdio_init(&mac_mdio_info); + if (!bus) { + printf("Failed to register mdio\n"); + return -1; + } + } + + switch (srds_s1) { + case 0x3508: + printf("ls1012aqds:supported SerDes PRCTL= %d\n", srds_s1); +#ifdef CONFIG_PFE_RGMII_RESET_WA + /* + * Work around for FPGA registers initialization + * This is needed for RGMII to work. + */ + printf("Reset RGMII WA....\n"); + data8 = QIXIS_READ(rst_frc[0]); + data8 |= 0x2; + QIXIS_WRITE(rst_frc[0], data8); + data8 = QIXIS_READ(rst_frc[0]); + + data8 = QIXIS_READ(res8[6]); + data8 |= 0xff; + QIXIS_WRITE(res8[6], data8); + data8 = QIXIS_READ(res8[6]); +#endif + if (priv->gemac_port) { + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_RGMII); + if (ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_RGMII) + < 0) { + printf("Failed to register mdio for %s\n", mdio_name); + } + + /* MAC2 */ + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_RGMII); + bus = miiphy_get_dev_by_name(mdio_name); + pfe_set_mdio(priv->gemac_port, bus); + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC2_PHY_ADDR, + PHY_INTERFACE_MODE_RGMII); + + } else { + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1); + if (ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_SLOT1) + < 0) { + printf("Failed to register mdio for %s\n", mdio_name); + } + + /* MAC1 */ + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1); + bus = miiphy_get_dev_by_name(mdio_name); + pfe_set_mdio(priv->gemac_port, bus); + pfe_set_phy_address_mode(priv->gemac_port, + CONFIG_PFE_EMAC1_PHY_ADDR, + PHY_INTERFACE_MODE_SGMII); + } + + break; + + case 0x2205: + printf("ls1012aqds:supported SerDes PRCTL= %d\n", srds_s1); + /* + * Work around for FPGA registers initialization + * This is needed for RGMII to work. + */ + printf("Reset SLOT1 SLOT2....\n"); + data8 = QIXIS_READ(rst_frc[2]); + data8 |= 0xc0; + QIXIS_WRITE(rst_frc[2], data8); + mdelay(100); + data8 = QIXIS_READ(rst_frc[2]); + data8 &= 0x3f; + QIXIS_WRITE(rst_frc[2], data8); + + if (priv->gemac_port) { + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT2); + if (ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_SLOT2) + < 0) { + printf("Failed to register mdio for %s\n", mdio_name); + } + /* MAC2 */ + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT2); + bus = miiphy_get_dev_by_name(mdio_name); + pfe_set_mdio(1, bus); + pfe_set_phy_address_mode(1, CONFIG_PFE_SGMII_2500_PHY2_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + + data8 = QIXIS_READ(brdcfg[12]); + data8 |= 0x20; + QIXIS_WRITE(brdcfg[12], data8); + + } else { + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1); + if (ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_SLOT1) + < 0) { + printf("Failed to register mdio for %s\n", mdio_name); + } + + /* MAC1 */ + mdio_name = ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1); + bus = miiphy_get_dev_by_name(mdio_name); + pfe_set_mdio(0, bus); + pfe_set_phy_address_mode(0, + CONFIG_PFE_SGMII_2500_PHY1_ADDR, + PHY_INTERFACE_MODE_SGMII_2500); + } + break; + + default: + printf("ls1012aqds:unsupported SerDes PRCTL= %d\n", srds_s1); + break; + } + return 0; +} + +static struct pfe_eth_pdata pfe_pdata0 = { + .pfe_eth_pdata_mac = { + .iobase = (phys_addr_t)EMAC1_BASE_ADDR, + .phy_interface = 0, + }, + + .pfe_ddr_addr = { + .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR, + .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR, + }, +}; + +static struct pfe_eth_pdata pfe_pdata1 = { + .pfe_eth_pdata_mac = { + .iobase = (phys_addr_t)EMAC2_BASE_ADDR, + .phy_interface = 1, + }, + + .pfe_ddr_addr = { + .ddr_pfe_baseaddr = (void *)CONFIG_DDR_PFE_BASEADDR, + .ddr_pfe_phys_baseaddr = CONFIG_DDR_PFE_PHYS_BASEADDR, + }, +}; + +U_BOOT_DEVICE(ls1012a_pfe0) = { + .name = "pfe_eth", + .platdata = &pfe_pdata0, +}; + +U_BOOT_DEVICE(ls1012a_pfe1) = { + .name = "pfe_eth", + .platdata = &pfe_pdata1, +}; diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index 406194da27..4577917e8d 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -25,9 +25,9 @@ #include #include #include - #include "../common/qixis.h" #include "ls1012aqds_qixis.h" +#include "ls1012aqds_pfe.h" DECLARE_GLOBAL_DATA_PTR; @@ -128,11 +128,6 @@ int board_init(void) return 0; } -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} - int esdhc_status_fixup(void *blob, const char *compat) { char esdhc0_path[] = "/soc/esdhc@1560000"; @@ -161,12 +156,102 @@ int esdhc_status_fixup(void *blob, const char *compat) return 0; } +static int pfe_set_properties(void *set_blob, struct pfe_prop_val prop_val, + char *enet_path, char *mdio_path) +{ + do_fixup_by_path(set_blob, enet_path, "fsl,gemac-bus-id", + &prop_val.busid, PFE_PROP_LEN, 1); + do_fixup_by_path(set_blob, enet_path, "fsl,gemac-phy-id", + &prop_val.phyid, PFE_PROP_LEN, 1); + do_fixup_by_path(set_blob, enet_path, "fsl,mdio-mux-val", + &prop_val.mux_val, PFE_PROP_LEN, 1); + do_fixup_by_path(set_blob, enet_path, "phy-mode", + prop_val.phy_mode, strlen(prop_val.phy_mode) + 1, 1); + do_fixup_by_path(set_blob, mdio_path, "fsl,mdio-phy-mask", + &prop_val.phy_mask, PFE_PROP_LEN, 1); + return 0; +} + +static void fdt_fsl_fixup_of_pfe(void *blob) +{ + int i = 0; + struct pfe_prop_val prop_val; + void *l_blob = blob; + + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + unsigned int srds_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK; + srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT; + + for (i = 0; i < NUM_ETH_NODE; i++) { + switch (srds_s1) { + case SERDES_1_G_PROTOCOL: + if (i == 0) { + prop_val.busid = cpu_to_fdt32( + ETH_1_1G_BUS_ID); + prop_val.phyid = cpu_to_fdt32( + ETH_1_1G_PHY_ID); + prop_val.mux_val = cpu_to_fdt32( + ETH_1_1G_MDIO_MUX); + prop_val.phy_mask = cpu_to_fdt32( + ETH_1G_MDIO_PHY_MASK); + prop_val.phy_mode = "sgmii"; + pfe_set_properties(l_blob, prop_val, ETH_1_PATH, + ETH_1_MDIO); + } else { + prop_val.busid = cpu_to_fdt32( + ETH_2_1G_BUS_ID); + prop_val.phyid = cpu_to_fdt32( + ETH_2_1G_PHY_ID); + prop_val.mux_val = cpu_to_fdt32( + ETH_2_1G_MDIO_MUX); + prop_val.phy_mask = cpu_to_fdt32( + ETH_1G_MDIO_PHY_MASK); + prop_val.phy_mode = "rgmii"; + pfe_set_properties(l_blob, prop_val, ETH_2_PATH, + ETH_2_MDIO); + } + break; + case SERDES_2_5_G_PROTOCOL: + if (i == 0) { + prop_val.busid = cpu_to_fdt32( + ETH_1_2_5G_BUS_ID); + prop_val.phyid = cpu_to_fdt32( + ETH_1_2_5G_PHY_ID); + prop_val.mux_val = cpu_to_fdt32( + ETH_1_2_5G_MDIO_MUX); + prop_val.phy_mask = cpu_to_fdt32( + ETH_2_5G_MDIO_PHY_MASK); + prop_val.phy_mode = "sgmii-2500"; + pfe_set_properties(l_blob, prop_val, ETH_1_PATH, + ETH_1_MDIO); + } else { + prop_val.busid = cpu_to_fdt32( + ETH_2_2_5G_BUS_ID); + prop_val.phyid = cpu_to_fdt32( + ETH_2_2_5G_PHY_ID); + prop_val.mux_val = cpu_to_fdt32( + ETH_2_2_5G_MDIO_MUX); + prop_val.phy_mask = cpu_to_fdt32( + ETH_2_5G_MDIO_PHY_MASK); + prop_val.phy_mode = "sgmii-2500"; + pfe_set_properties(l_blob, prop_val, ETH_2_PATH, + ETH_2_MDIO); + } + break; + default: + printf("serdes:[%d]\n", srds_s1); + } + } +} + #ifdef CONFIG_OF_BOARD_SETUP int ft_board_setup(void *blob, bd_t *bd) { arch_fixup_fdt(blob); ft_cpu_setup(blob, bd); + fdt_fsl_fixup_of_pfe(blob); return 0; } diff --git a/board/freescale/ls1012aqds/ls1012aqds_pfe.h b/board/freescale/ls1012aqds/ls1012aqds_pfe.h new file mode 100644 index 0000000000..b06f722940 --- /dev/null +++ b/board/freescale/ls1012aqds/ls1012aqds_pfe.h @@ -0,0 +1,45 @@ +/* + * Copyright 2017 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define ETH_1_1G_BUS_ID 0x1 +#define ETH_1_1G_PHY_ID 0x1e +#define ETH_1_1G_MDIO_MUX 0x2 +#define ETH_1G_MDIO_PHY_MASK 0xBFFFFFFD +#define ETH_1_1G_PHY_MODE "sgmii" +#define ETH_2_1G_BUS_ID 0x1 +#define ETH_2_1G_PHY_ID 0x1 +#define ETH_2_1G_MDIO_MUX 0x1 +#define ETH_2_1G_PHY_MODE "rgmii" + +#define ETH_1_2_5G_BUS_ID 0x0 +#define ETH_1_2_5G_PHY_ID 0x1 +#define ETH_1_2_5G_MDIO_MUX 0x2 +#define ETH_2_5G_MDIO_PHY_MASK 0xFFFFFFF9 +#define ETH_2_5G_PHY_MODE "sgmii-2500" +#define ETH_2_2_5G_BUS_ID 0x1 +#define ETH_2_2_5G_PHY_ID 0x2 +#define ETH_2_2_5G_MDIO_MUX 0x3 + +#define SERDES_1_G_PROTOCOL 0x3508 +#define SERDES_2_5_G_PROTOCOL 0x2205 + +#define PFE_PROP_LEN 4 + +#define ETH_1_PATH "/pfe@04000000/ethernet@0" +#define ETH_1_MDIO ETH_1_PATH "/mdio@0" + +#define ETH_2_PATH "/pfe@04000000/ethernet@1" +#define ETH_2_MDIO ETH_2_PATH "/mdio@0" + +#define NUM_ETH_NODE 2 + +struct pfe_prop_val { + int busid; + int phyid; + int mux_val; + int phy_mask; + char *phy_mode; +}; diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h b/board/freescale/ls1012aqds/ls1012aqds_qixis.h index 584f604aa8..7a1ba3d938 100644 --- a/board/freescale/ls1012aqds/ls1012aqds_qixis.h +++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h @@ -11,7 +11,7 @@ /* BRDCFG4[4:7] select EC1 and EC2 as a pair */ #define BRDCFG4_EMISEL_MASK 0xe0 -#define BRDCFG4_EMISEL_SHIFT 5 +#define BRDCFG4_EMISEL_SHIFT 6 /* SYSCLK */ #define QIXIS_SYSCLK_66 0x0