From: Fabio Estevam Date: Mon, 29 Jan 2018 13:11:57 +0000 (-0200) Subject: mx6sabresd: Add fastboot support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=78804518e49ff033e785ba0e9b43846284829c3f;p=u-boot.git mx6sabresd: Add fastboot support fastboot tool is a convenient way to flash the eMMC, so add support for it. Examples of usages: On the mx6sabresd: => fastboot 0 On the Linux PC connected via USB: $ sudo fastboot getvar bootloader-version -i 0x0525 bootloader-version: U-Boot 2018.01-00550-g7517cfe finished. total time: 0.000s $ sudo fastboot reboot -i 0x0525 (this causes the mx6sabresd to reboot) Signed-off-by: Fabio Estevam Tested-by: Shawn Guo --- diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index f6a53d6ae4..feb385d4a5 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -20,6 +20,12 @@ CONFIG_SPL_USB_HOST_SUPPORT=y CONFIG_SPL_USB_GADGET_SUPPORT=y CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y +CONFIG_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x12000000 +CONFIG_FASTBOOT_BUF_SIZE=0x10000000 +CONFIG_FASTBOOT_USB_DEV=0 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=2 CONFIG_CMD_BOOTZ=y CONFIG_CMD_SPL=y CONFIG_CMD_SPL_WRITE_SIZE=0x20000