From: Stefan Roese Date: Mon, 20 Jul 2015 09:20:40 +0000 (+0200) Subject: arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7853c508e4d501aaff42b8aa6ab079fedd110fae;p=u-boot.git arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support This patch adds the configuration options to boot via SDIO/MMC on the Marvell DB-88F6820-GP Armada A38x board. The default boot device is still SPI NOR flash. To enable MMC booting on this board 2 things need to be changes: a) Change kwbimage.cfg BOOT_FROM sdio b) In the config header select #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD The generated image needs to be copied to the first bootable MMC partition: dd if=u-boot-spl.kwb of=/dev/sdX1 Signed-off-by: Stefan Roese Cc: Luka Perkov Cc: Dirk Eibach --- diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h index 73b323605e..739c2bf3d5 100644 --- a/include/configs/db-88f6820-gp.h +++ b/include/configs/db-88f6820-gp.h @@ -110,6 +110,17 @@ "initrd_high=0x10000000\0" /* SPL */ +/* + * Select the boot device here + * + * Currently supported are: + * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash + * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) + */ +#define SPL_BOOT_SPI_NOR_FLASH 1 +#define SPL_BOOT_SDIO_MMC_CARD 2 +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH + /* Defines for SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_SIZE (140 << 10) @@ -131,6 +142,7 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_I2C_SUPPORT +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT @@ -138,6 +150,22 @@ #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS +#endif + +#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +/* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 +#define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) +#define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR (CONFIG_SYS_U_BOOT_OFFS / 512) +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ +#endif +#endif /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ #define CONFIG_SYS_MVEBU_DDR_A38X