From: Peng Fan Date: Wed, 22 Feb 2017 08:21:56 +0000 (+0800) Subject: imx: imx7ulp: add EVK board support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=77fa04577acbb07753ec4800f2a0410d8d37fe61;p=u-boot.git imx: imx7ulp: add EVK board support Add EVK board support. Add the evk dts file. LOG: U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800) CPU: Freescale i.MX7ULP rev1.0 at 500 MHz Reset cause: POR Boot mode: Dual boot Model: NXP i.MX7ULP EVK DRAM: 1 GiB MMC: FSL_SDHC: 0 In: serial@402D0000 Out: serial@402D0000 Err: serial@402D0000 Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan Cc: Stefano Babic --- diff --git a/arch/arm/cpu/armv7/mx7ulp/Kconfig b/arch/arm/cpu/armv7/mx7ulp/Kconfig index 85efd6d5d8..1bdc85a9a0 100644 --- a/arch/arm/cpu/armv7/mx7ulp/Kconfig +++ b/arch/arm/cpu/armv7/mx7ulp/Kconfig @@ -3,4 +3,15 @@ if ARCH_MX7ULP config SYS_SOC default "mx7ulp" +choice + prompt "MX7ULP board select" + optional + +config TARGET_MX7ULP_EVK + bool "Support mx7ulp EVK board" + +endchoice + +source "board/freescale/mx7ulp_evk/Kconfig" + endif diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 231ebfa7db..7be5c02d1c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -320,6 +320,8 @@ dtb-$(CONFIG_MX6) += imx6ull-14x14-evk.dtb \ dtb-$(CONFIG_MX7) += imx7-colibri.dtb +dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb + dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \ keystone-k2l-evm.dtb \ keystone-k2e-evm.dtb \ diff --git a/arch/arm/dts/imx7ulp-evk.dts b/arch/arm/dts/imx7ulp-evk.dts new file mode 100644 index 0000000000..e56b7226e6 --- /dev/null +++ b/arch/arm/dts/imx7ulp-evk.dts @@ -0,0 +1,426 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "imx7ulp.dtsi" + +/ { + model = "NXP i.MX7ULP EVK"; + compatible = "fsl,imx7ulp-evk", "fsl,imx7ulp", "Generic DT based system"; + + chosen { + bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x402D0010,115200"; + stdout-path = &lpuart4; + }; + + bcmdhd_wlan_0: bcmdhd_wlan@0 { + compatible = "android,bcmdhd_wlan"; + wlreg_on-supply = <&wlreg_on>; + bcmdhd_fw = "/lib/firmware/bcm/1DX_BCM4343W/fw_bcmdhd.bin"; + bcmdhd_nv = "/lib/firmware/bcm/1DX_BCM4343W/bcmdhd.1DX.SDIO.cal"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>; + default-on; + status = "okay"; + }; + + mipi_dsi_reset: mipi-dsi-reset { + compatible = "gpio-reset"; + reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + #reset-cells = <0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + wlreg_on: fixedregulator@100 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "wlreg_on"; + gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; + startup-delay-us = <100>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vsd_3v3: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_vsd_3v3b: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VSD_3V3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + extcon_usb1: extcon_usb1 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_extcon_usb1>; + }; + + pf1550-rpmsg { + compatible = "fsl,pf1550-rpmsg"; + sw1_reg: SW1 { + regulator-name = "SW1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: SW2 { + regulator-name = "SW2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: SW3 { + regulator-name = "SW3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: VREFDDR { + regulator-name = "VREFDDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + vldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&iomuxc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_1>; + + imx7ulp-evk { + pinctrl_hog_1: hoggrp-1 { + fsl,pins = < + ULP1_PAD_PTC10__PTC10 0x30100 /* USDHC0 CD */ + ULP1_PAD_PTC1__PTC1 0x20100 + ULP1_PAD_PTD0__PTD0 0x30100 /* USDHC0 RST */ + ULP1_PAD_PTE13__PTE13 0x30103 /* USDHC1 CD */ + ULP1_PAD_PTE12__PTE12 0x30103 /* USDHC1 WP */ + ULP1_PAD_PTE14__SDHC1_VS 0x843 /* USDHC1 VSEL */ + >; + }; + + pinctrl_backlight: backlight_grp { + fsl,pins = < + ULP1_PAD_PTF2__PTF2 0x20100 + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + ULP1_PAD_PTC4__LPI2C5_SCL 0x527 + ULP1_PAD_PTC5__LPI2C5_SDA 0x527 + >; + }; + + pinctrl_mipi_dsi_reset: mipi_dsi_reset_grp { + fsl,pins = < + ULP1_PAD_PTC19__PTC19 0x20103 + >; + }; + + pinctrl_lpuart4: lpuart4grp { + fsl,pins = < + ULP1_PAD_PTC3__LPUART4_RX 0x400 + ULP1_PAD_PTC2__LPUART4_TX 0x400 + >; + }; + + pinctrl_lpuart6: lpuart6grp { + fsl,pins = < + ULP1_PAD_PTE10__LPUART6_TX 0x400 + ULP1_PAD_PTE11__LPUART6_RX 0x400 + ULP1_PAD_PTE9__LPUART6_RTS_B 0x400 + ULP1_PAD_PTE8__LPUART6_CTS_B 0x400 + ULP1_PAD_PTE7__PTE7 0x00 /* BT_REG_ON */ + >; + }; + + pinctrl_lpuart7: lpuart7grp { + fsl,pins = < + ULP1_PAD_PTF14__LPUART7_TX 0x400 + ULP1_PAD_PTF15__LPUART7_RX 0x400 + ULP1_PAD_PTF13__LPUART7_RTS_B 0x400 + ULP1_PAD_PTF12__LPUART7_CTS_B 0x400 + >; + }; + + pinctrl_usdhc0: usdhc0grp { + fsl,pins = < + ULP1_PAD_PTD1__SDHC0_CMD 0x843 + ULP1_PAD_PTD2__SDHC0_CLK 0x10843 + ULP1_PAD_PTD7__SDHC0_D3 0x843 + ULP1_PAD_PTD8__SDHC0_D2 0x843 + ULP1_PAD_PTD9__SDHC0_D1 0x843 + ULP1_PAD_PTD10__SDHC0_D0 0x843 + >; + }; + + pinctrl_usdhc0_8bit: usdhc0grp_8bit { + fsl,pins = < + ULP1_PAD_PTD1__SDHC0_CMD 0x843 + ULP1_PAD_PTD2__SDHC0_CLK 0x843 + ULP1_PAD_PTD3__SDHC0_D7 0x843 + ULP1_PAD_PTD4__SDHC0_D6 0x843 + ULP1_PAD_PTD5__SDHC0_D5 0x843 + ULP1_PAD_PTD6__SDHC0_D4 0x843 + ULP1_PAD_PTD7__SDHC0_D3 0x843 + ULP1_PAD_PTD8__SDHC0_D2 0x843 + ULP1_PAD_PTD9__SDHC0_D1 0x843 + ULP1_PAD_PTD10__SDHC0_D0 0x843 + >; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = < + ULP1_PAD_PTF12__LPI2C7_SCL 0x527 + ULP1_PAD_PTF13__LPI2C7_SDA 0x527 + >; + }; + + pinctrl_lpspi3: lpspi3grp { + fsl,pins = < + ULP1_PAD_PTF16__LPSPI3_SIN 0x300 + ULP1_PAD_PTF17__LPSPI3_SOUT 0x300 + ULP1_PAD_PTF18__LPSPI3_SCK 0x300 + ULP1_PAD_PTF19__LPSPI3_PCS0 0x300 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + ULP1_PAD_PTC0__PTC0 0x30100 + >; + }; + + pinctrl_extcon_usb1: extcon1grp { + fsl,pins = < + ULP1_PAD_PTC8__PTC8 0x30103 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + ULP1_PAD_PTE3__SDHC1_CMD 0x843 + ULP1_PAD_PTE2__SDHC1_CLK 0x843 + ULP1_PAD_PTE1__SDHC1_D0 0x843 + ULP1_PAD_PTE0__SDHC1_D1 0x843 + ULP1_PAD_PTE5__SDHC1_D2 0x843 + ULP1_PAD_PTE4__SDHC1_D3 0x843 + >; + }; + + pinctrl_usdhc1_rst: usdhc1grp_rst { + fsl,pins = < + ULP1_PAD_PTE11__PTE11 0x30100 /* USDHC1 RST */ + >; + }; + + pinctrl_wifi: wifigrp { + fsl,pins = < + ULP1_PAD_PTE6__PTE6 0x43 /* WL_REG_ON */ + >; + }; + }; +}; + +&lcdif { + status = "okay"; + disp-dev = "mipi_dsi_northwest"; + display = <&display0>; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&lpi2c7 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c7>; +}; + +&lpi2c5 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c5>; + status = "okay"; + + fxas2100x@20 { + compatible = "fsl,fxas2100x"; + reg = <0x20>; + }; + + fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x1e>; + }; + + mpl3115@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; +}; + +&lpspi3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi3>; + status = "okay"; + + spidev0: spi@0 { + reg = <0>; + compatible = "rohm,dh2228fv"; + spi-max-frequency = <1000000>; + }; +}; + +&mipi_dsi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_dsi_reset>; + lcd_panel = "TRULY-WVGA-TFT3P5581E"; + resets = <&mipi_dsi_reset>; + status = "okay"; +}; + +&lpuart4 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart4>; + status = "okay"; +}; + +&lpuart6 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart6>; + status = "okay"; +}; + +&lpuart7 { /* Uart test */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart7>; + status = "disabled"; +}; + +&rpmsg{ + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + extcon = <0>, <&extcon_usb1>; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usdhc0 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc0>; + pinctrl-1 = <&pinctrl_usdhc0>; + pinctrl-2 = <&pinctrl_usdhc0>; + pinctrl-3 = <&pinctrl_usdhc0>; + cd-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_vsd_3v3>; + vqmmc-supply = <&vldo2_reg>; + status = "okay"; +}; diff --git a/arch/arm/dts/imx7ulp-uboot.dtsi b/arch/arm/dts/imx7ulp-uboot.dtsi new file mode 100644 index 0000000000..712cec4921 --- /dev/null +++ b/arch/arm/dts/imx7ulp-uboot.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright 2015-2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&soc { + u-boot,dm-pre-reloc; +}; + +&ahbbridge0 { + u-boot,dm-pre-reloc; +}; + +&ahbbridge1 { + u-boot,dm-pre-reloc; +}; + +&iomuxc { + u-boot,dm-pre-reloc; +}; + +&iomuxc1 { + u-boot,dm-pre-reloc; +}; + +&lpuart4 { + u-boot,dm-pre-reloc; +}; + +&lpuart5 { + u-boot,dm-pre-reloc; +}; + +&lpuart6 { + u-boot,dm-pre-reloc; +}; + +&lpuart7 { + u-boot,dm-pre-reloc; +}; diff --git a/board/freescale/mx7ulp_evk/Kconfig b/board/freescale/mx7ulp_evk/Kconfig new file mode 100644 index 0000000000..ff448311f9 --- /dev/null +++ b/board/freescale/mx7ulp_evk/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MX7ULP_EVK + +config SYS_BOARD + default "mx7ulp_evk" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "mx7ulp_evk" + +endif diff --git a/board/freescale/mx7ulp_evk/MAINTAINERS b/board/freescale/mx7ulp_evk/MAINTAINERS new file mode 100644 index 0000000000..1aa2644563 --- /dev/null +++ b/board/freescale/mx7ulp_evk/MAINTAINERS @@ -0,0 +1,7 @@ +MX7ULPEVK BOARD +M: Peng Fan +S: Maintained +F: board/freescale/mx7ulp_evk/ +F: include/configs/mx7ulp_evk.h +F: configs/mx7ulp_evk_defconfig +F: configs/mx7ulp_evk_plugin_defconfig diff --git a/board/freescale/mx7ulp_evk/Makefile b/board/freescale/mx7ulp_evk/Makefile new file mode 100644 index 0000000000..5e19eb4859 --- /dev/null +++ b/board/freescale/mx7ulp_evk/Makefile @@ -0,0 +1,10 @@ +# (C) Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx7ulp_evk.o + +extra-$(CONFIG_USE_PLUGIN) := plugin.bin +$(obj)/plugin.bin: $(obj)/plugin.o + $(OBJCOPY) -O binary --gap-fill 0xff $< $@ diff --git a/board/freescale/mx7ulp_evk/imximage.cfg b/board/freescale/mx7ulp_evk/imximage.cfg new file mode 100644 index 0000000000..e4e4cb3b21 --- /dev/null +++ b/board/freescale/mx7ulp_evk/imximage.cfg @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi/sd/nand/onenand, qspi/nor + */ + +BOOT_FROM sd + +#ifdef CONFIG_USE_IMXIMG_PLUGIN +/*PLUGIN plugin-binary-file IRAM_FREE_START_ADDR*/ +PLUGIN board/freescale/mx7ulp_evk/plugin.bin 0x2F020000 +#else + +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x403f00dc 0x00000000 +DATA 4 0x403e0040 0x01000020 +DATA 4 0x403e0500 0x01000000 +DATA 4 0x403e050c 0x80808080 +DATA 4 0x403e0508 0x00140000 +DATA 4 0x403E0510 0x00000004 +DATA 4 0x403E0514 0x00000002 +DATA 4 0x403e0500 0x00000001 +CHECK_BITS_SET 4 0x403e0500 0x01000000 +DATA 4 0x403e050c 0x8080801E +CHECK_BITS_SET 4 0x403e050c 0x00000040 +DATA 4 0x403E0030 0x00000001 +DATA 4 0x403e0040 0x11000020 +DATA 4 0x403f00dc 0x42000000 + +DATA 4 0x40B300AC 0x40000000 + +DATA 4 0x40AD0128 0x00040000 +DATA 4 0x40AD00F8 0x00000000 +DATA 4 0x40AD00D8 0x00000180 +DATA 4 0x40AD0108 0x00000180 +DATA 4 0x40AD0104 0x00000180 +DATA 4 0x40AD0124 0x00010000 +DATA 4 0x40AD0080 0x0000018C +DATA 4 0x40AD0084 0x0000018C +DATA 4 0x40AD0088 0x0000018C +DATA 4 0x40AD008C 0x0000018C + +DATA 4 0x40AD0120 0x00010000 +DATA 4 0x40AD010C 0x00000180 +DATA 4 0x40AD0110 0x00000180 +DATA 4 0x40AD0114 0x00000180 +DATA 4 0x40AD0118 0x00000180 +DATA 4 0x40AD0090 0x00000180 +DATA 4 0x40AD0094 0x00000180 +DATA 4 0x40AD0098 0x00000180 +DATA 4 0x40AD009C 0x00000180 + +DATA 4 0x40AD00E0 0x00040000 +DATA 4 0x40AD00E4 0x00040000 + +DATA 4 0x40AB001C 0x00008000 +DATA 4 0x40AB0800 0xA1390003 +DATA 4 0x40AB085C 0x0D3900A0 +DATA 4 0x40AB0890 0x00400000 + +DATA 4 0x40AB0848 0x40404040 +DATA 4 0x40AB0850 0x40404040 +DATA 4 0x40AB081C 0x33333333 +DATA 4 0x40AB0820 0x33333333 +DATA 4 0x40AB0824 0x33333333 +DATA 4 0x40AB0828 0x33333333 + +DATA 4 0x40AB082C 0xf3333333 +DATA 4 0x40AB0830 0xf3333333 +DATA 4 0x40AB0834 0xf3333333 +DATA 4 0x40AB0838 0xf3333333 + +DATA 4 0x40AB08C0 0x24922492 +DATA 4 0x40AB08B8 0x00000800 + +DATA 4 0x40AB0004 0x00020052 +DATA 4 0x40AB000C 0x292C42F3 +DATA 4 0x40AB0010 0x00100A22 +DATA 4 0x40AB0038 0x00120556 +DATA 4 0x40AB0014 0x00C700DB +DATA 4 0x40AB0018 0x00211718 +DATA 4 0x40AB002C 0x0F9F26D2 +DATA 4 0x40AB0030 0x009F0E10 +DATA 4 0x40AB0040 0x0000003F +DATA 4 0x40AB0000 0xC3190000 + +DATA 4 0x40AB001C 0x00008050 +DATA 4 0x40AB001C 0x00008058 +DATA 4 0x40AB001C 0x003F8030 +DATA 4 0x40AB001C 0x003F8038 +DATA 4 0x40AB001C 0xFF0A8030 +DATA 4 0x40AB001C 0xFF0A8038 +DATA 4 0x40AB001C 0x04028030 +DATA 4 0x40AB001C 0x04028038 +DATA 4 0x40AB001C 0x83018030 +DATA 4 0x40AB001C 0x83018038 +DATA 4 0x40AB001C 0x01038030 +DATA 4 0x40AB001C 0x01038038 + +DATA 4 0x40AB083C 0x20000000 + +DATA 4 0x40AB0020 0x00001800 +DATA 4 0x40AB0800 0xA1310000 +DATA 4 0x40AB0004 0x00020052 +DATA 4 0x40AB0404 0x00011006 +DATA 4 0x40AB001C 0x00000000 +#endif diff --git a/board/freescale/mx7ulp_evk/mx7ulp_evk.c b/board/freescale/mx7ulp_evk/mx7ulp_evk.c new file mode 100644 index 0000000000..361871525e --- /dev/null +++ b/board/freescale/mx7ulp_evk/mx7ulp_evk.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_UP) + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +static iomux_cfg_t const lpuart4_pads[] = { + MX7ULP_PAD_PTC3__LPUART4_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7ULP_PAD_PTC2__LPUART4_TX | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + mx7ulp_iomux_setup_multiple_pads(lpuart4_pads, + ARRAY_SIZE(lpuart4_pads)); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} diff --git a/board/freescale/mx7ulp_evk/plugin.S b/board/freescale/mx7ulp_evk/plugin.S new file mode 100644 index 0000000000..9eab36520a --- /dev/null +++ b/board/freescale/mx7ulp_evk/plugin.S @@ -0,0 +1,224 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +.macro imx7ulp_ddr_freq_decrease + ldr r2, =0x403f0000 + ldr r3, =0x00000000 + str r3, [r2, #0xdc] + + ldr r2, =0x403e0000 + ldr r3, =0x01000020 + str r3, [r2, #0x40] + ldr r3, =0x01000000 + str r3, [r2, #0x500] + ldr r3, =0x80808080 + str r3, [r2, #0x50c] + ldr r3, =0x00140000 + str r3, [r2, #0x508] + ldr r3, =0x00000004 + str r3, [r2, #0x510] + ldr r3, =0x00000002 + str r3, [r2, #0x514] + ldr r3, =0x00000001 + str r3, [r2, #0x500] + + ldr r3, =0x01000000 +wait1: + ldr r4, [r2, #0x500] + and r4, r3 + cmp r4, r3 + bne wait1 + + ldr r3, =0x8080801E + str r3, [r2, #0x50c] + + ldr r3, =0x00000040 +wait2: + ldr r4, [r2, #0x50c] + and r4, r3 + cmp r4, r3 + bne wait2 + + ldr r3, =0x00000001 + str r3, [r2, #0x30] + ldr r3, =0x11000020 + str r3, [r2, #0x40] + + ldr r2, =0x403f0000 + ldr r3, =0x42000000 + str r3, [r2, #0xdc] + +.endm + +.macro imx7ulp_evk_ddr_setting + + imx7ulp_ddr_freq_decrease + + /* Enable MMDC PCC clock */ + ldr r2, =0x40b30000 + ldr r3, =0x40000000 + str r3, [r2, #0xac] + + /* Configure DDR pad */ + ldr r0, =0x40ad0000 + ldr r1, =0x00040000 + str r1, [r0, #0x128] + ldr r1, =0x0 + str r1, [r0, #0xf8] + ldr r1, =0x00000180 + str r1, [r0, #0xd8] + ldr r1, =0x00000180 + str r1, [r0, #0x108] + ldr r1, =0x00000180 + str r1, [r0, #0x104] + ldr r1, =0x00010000 + str r1, [r0, #0x124] + ldr r1, =0x0000018C + str r1, [r0, #0x80] + ldr r1, =0x0000018C + str r1, [r0, #0x84] + ldr r1, =0x0000018C + str r1, [r0, #0x88] + ldr r1, =0x0000018C + str r1, [r0, #0x8c] + + ldr r1, =0x00010000 + str r1, [r0, #0x120] + ldr r1, =0x00000180 + str r1, [r0, #0x10c] + ldr r1, =0x00000180 + str r1, [r0, #0x110] + ldr r1, =0x00000180 + str r1, [r0, #0x114] + ldr r1, =0x00000180 + str r1, [r0, #0x118] + ldr r1, =0x00000180 + str r1, [r0, #0x90] + ldr r1, =0x00000180 + str r1, [r0, #0x94] + ldr r1, =0x00000180 + str r1, [r0, #0x98] + ldr r1, =0x00000180 + str r1, [r0, #0x9c] + ldr r1, =0x00040000 + str r1, [r0, #0xe0] + ldr r1, =0x00040000 + str r1, [r0, #0xe4] + + ldr r0, =0x40ab0000 + ldr r1, =0x00008000 + str r1, [r0, #0x1c] + ldr r1, =0xA1390003 + str r1, [r0, #0x800] + ldr r1, =0x0D3900A0 + str r1, [r0, #0x85c] + ldr r1, =0x00400000 + str r1, [r0, #0x890] + + ldr r1, =0x40404040 + str r1, [r0, #0x848] + ldr r1, =0x40404040 + str r1, [r0, #0x850] + ldr r1, =0x33333333 + str r1, [r0, #0x81c] + ldr r1, =0x33333333 + str r1, [r0, #0x820] + ldr r1, =0x33333333 + str r1, [r0, #0x824] + ldr r1, =0x33333333 + str r1, [r0, #0x828] + + ldr r1, =0xf3333333 + str r1, [r0, #0x82c] + ldr r1, =0xf3333333 + str r1, [r0, #0x830] + ldr r1, =0xf3333333 + str r1, [r0, #0x834] + ldr r1, =0xf3333333 + str r1, [r0, #0x838] + + ldr r1, =0x24922492 + str r1, [r0, #0x8c0] + ldr r1, =0x00000800 + str r1, [r0, #0x8b8] + + ldr r1, =0x00020052 + str r1, [r0, #0x4] + ldr r1, =0x292C42F3 + str r1, [r0, #0xc] + ldr r1, =0x00100A22 + str r1, [r0, #0x10] + ldr r1, =0x00120556 + str r1, [r0, #0x38] + ldr r1, =0x00C700DB + str r1, [r0, #0x14] + ldr r1, =0x00211718 + str r1, [r0, #0x18] + + ldr r1, =0x0F9F26D2 + str r1, [r0, #0x2c] + ldr r1, =0x009F0E10 + str r1, [r0, #0x30] + ldr r1, =0x0000003F + str r1, [r0, #0x40] + ldr r1, =0xC3190000 + str r1, [r0, #0x0] + + ldr r1, =0x00008050 + str r1, [r0, #0x1c] + ldr r1, =0x00008058 + str r1, [r0, #0x1c] + ldr r1, =0x003F8030 + str r1, [r0, #0x1c] + ldr r1, =0x003F8038 + str r1, [r0, #0x1c] + ldr r1, =0xFF0A8030 + str r1, [r0, #0x1c] + ldr r1, =0xFF0A8038 + str r1, [r0, #0x1c] + ldr r1, =0x04028030 + str r1, [r0, #0x1c] + ldr r1, =0x04028038 + str r1, [r0, #0x1c] + ldr r1, =0x83018030 + str r1, [r0, #0x1c] + ldr r1, =0x83018038 + str r1, [r0, #0x1c] + ldr r1, =0x01038030 + str r1, [r0, #0x1c] + ldr r1, =0x01038038 + str r1, [r0, #0x1c] + + ldr r1, =0x20000000 + str r1, [r0, #0x83c] + + ldr r1, =0x00001800 + str r1, [r0, #0x20] + ldr r1, =0xA1310000 + str r1, [r0, #0x800] + ldr r1, =0x00020052 + str r1, [r0, #0x4] + ldr r1, =0x00011006 + str r1, [r0, #0x404] + ldr r1, =0x00000000 + str r1, [r0, #0x1c] + +.endm + +.macro imx7ulp_clock_gating +.endm + +.macro imx7ulp_qos_setting +.endm + +.macro imx7ulp_ddr_setting + imx7ulp_evk_ddr_setting +.endm + +/* include the common plugin code here */ +#include diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig new file mode 100644 index 0000000000..8c7446b8e2 --- /dev/null +++ b/configs/mx7ulp_evk_defconfig @@ -0,0 +1,17 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7ULP=y +CONFIG_TARGET_MX7ULP_EVK=y +CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_IMX_RGPIO2P=y +CONFIG_DM_I2C=y +CONFIG_SYS_LPI2C_IMX=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7ULP=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig new file mode 100644 index 0000000000..87a9324752 --- /dev/null +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7ULP=y +CONFIG_TARGET_MX7ULP_EVK=y +CONFIG_USE_IMXIMG_PLUGIN=y +CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg" +CONFIG_HUSH_PARSER=y +CONFIG_CMD_I2C=y +CONFIG_OF_CONTROL=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_IMX_RGPIO2P=y +CONFIG_DM_I2C=y +CONFIG_SYS_LPI2C_IMX=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7ULP=y +CONFIG_DM_SERIAL=y +CONFIG_FSL_LPUART=y diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h new file mode 100644 index 0000000000..2604232d39 --- /dev/null +++ b/include/configs/mx7ulp_evk.h @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX7ULP EVK board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MX7ULP_EVK_CONFIG_H +#define __MX7ULP_EVK_CONFIG_H + +#include +#include + +/*Uncomment it to use secure boot*/ +/*#define CONFIG_SECURE_BOOT*/ + +#ifdef CONFIG_SECURE_BOOT +#ifndef CONFIG_CSF_SIZE +#define CONFIG_CSF_SIZE 0x4000 +#endif +#endif + +#define CONFIG_BOARD_POSTCLK_INIT +#define CONFIG_SYS_BOOTM_LEN 0x1000000 + +#define SRC_BASE_ADDR CMC1_RBASE +#define IRAM_BASE_ADDR OCRAM_0_BASE +#define IOMUXC_BASE_ADDR IOMUXC1_RBASE + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE SZ_8K + +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Using ULP WDOG for reset */ +#define WDOG_BASE_ADDR WDG1_RBASE + +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1Mhz from TSTMR */ + +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +/*#define CONFIG_REVISION_TAG*/ + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F + +/* UART */ +#define LPUART_BASE LPUART4_RBASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +#undef CONFIG_CMD_IMLS +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_8K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_TEXT_BASE 0x67800000 +#define PHYS_SDRAM 0x60000000 +#define PHYS_SDRAM_SIZE SZ_1G +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_CMD_BOOTZ + +#define CONFIG_LOADADDR 0x60800000 + +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_END 0x9E000000 + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */