From: Bin Meng Date: Fri, 4 Jun 2021 05:51:13 +0000 (+0800) Subject: riscv: ae350: dts: Add missing "u-boot, dm-spl" for SPL config X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=77eae0ebe6858805416cdc091975156a19185427;p=u-boot.git riscv: ae350: dts: Add missing "u-boot, dm-spl" for SPL config At present the AE350 SPL defconfig is using OF_PRIOR_STAGE. The intention was to use gdb to load device tree before running U-Boot SPL/proper from RAM. When we switch to OF_SEPARATE we will have to use our own DT but without "u-boot,dm-spl" in several essential nodes, SPL does not boot. Let's add all the required "u-boot,dm-spl" for SPL config. Signed-off-by: Bin Meng Reviewed-by: Rick Chen --- diff --git a/arch/riscv/dts/ae350-u-boot.dtsi b/arch/riscv/dts/ae350-u-boot.dtsi new file mode 100644 index 0000000000..0d4201cfae --- /dev/null +++ b/arch/riscv/dts/ae350-u-boot.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/ { + cpus { + u-boot,dm-spl; + CPU0: cpu@0 { + u-boot,dm-spl; + CPU0_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + CPU1: cpu@1 { + u-boot,dm-spl; + CPU1_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + CPU2: cpu@2 { + u-boot,dm-spl; + CPU2_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + CPU3: cpu@3 { + u-boot,dm-spl; + CPU3_intc: interrupt-controller { + u-boot,dm-spl; + }; + }; + }; + + memory@0 { + u-boot,dm-spl; + }; + + soc { + u-boot,dm-spl; + + plic1: interrupt-controller@e6400000 { + u-boot,dm-spl; + }; + + plmt0@e6000000 { + u-boot,dm-spl; + }; + }; + + serial0: serial@f0300000 { + u-boot,dm-spl; + }; + +}; diff --git a/arch/riscv/dts/ae350_32.dts b/arch/riscv/dts/ae350_32.dts index 70576846f2..083f676333 100644 --- a/arch/riscv/dts/ae350_32.dts +++ b/arch/riscv/dts/ae350_32.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "binman.dtsi" +#include "ae350-u-boot.dtsi" / { #address-cells = <1>; diff --git a/arch/riscv/dts/ae350_64.dts b/arch/riscv/dts/ae350_64.dts index 564e94a1db..74cff9122d 100644 --- a/arch/riscv/dts/ae350_64.dts +++ b/arch/riscv/dts/ae350_64.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "binman.dtsi" +#include "ae350-u-boot.dtsi" / { #address-cells = <2>;