From: Simon Guinot Date: Mon, 21 Nov 2011 13:55:47 +0000 (+0530) Subject: ARM: remove duplicated code for LaCie boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=77ea071fefbda70ed21a6f0e7bd34ec215e70d39;p=u-boot.git ARM: remove duplicated code for LaCie boards This patch groups together all the common functions for LaCie boards: Ethernet PHY and MAC address initializations. Moreover the configurations for LaCie Kirkwood boards are merged into a single file: include/configs/lacie_kw.h Signed-off-by: Simon Guinot --- diff --git a/board/LaCie/common/common.c b/board/LaCie/common/common.c new file mode 100644 index 0000000000..dc5350dc28 --- /dev/null +++ b/board/LaCie/common/common.c @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2011 Simon Guinot + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include +#include + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) + +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +void mv_phy_88e1116_init(const char *name) +{ + u16 reg; + u16 devadr; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { + printf("Err..(%s) could not read PHY dev address\n", __func__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1116 Initialized on %s\n", name); +} +#endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */ + +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) +int lacie_read_mac_address(uchar *mac_addr) +{ + int ret; + ushort version; + + /* I2C-0 for on-board EEPROM */ + i2c_set_bus_num(0); + + /* Check layout version for EEPROM data */ + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + (uchar *) &version, 2); + if (ret != 0) { + printf("Error: failed to read I2C EEPROM @%02x\n", + CONFIG_SYS_I2C_EEPROM_ADDR); + return ret; + } + version = be16_to_cpu(version); + if (version < 1 || version > 3) { + printf("Error: unknown version %d for EEPROM data\n", + version); + return -1; + } + + /* Read Ethernet MAC address from EEPROM */ + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac_addr, 6); + if (ret != 0) + printf("Error: failed to read I2C EEPROM @%02x\n", + CONFIG_SYS_I2C_EEPROM_ADDR); + return ret; +} +#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */ diff --git a/board/LaCie/common/common.h b/board/LaCie/common/common.h new file mode 100644 index 0000000000..82a9522236 --- /dev/null +++ b/board/LaCie/common/common.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2011 Simon Guinot + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef _LACIE_COMMON_H +#define _LACIE_COMMON_H + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +void mv_phy_88e1116_init(const char *name); +#endif +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) +int lacie_read_mac_address(uchar *mac); +#endif + +#endif /* _LACIE_COMMON_H */ diff --git a/board/LaCie/edminiv2/Makefile b/board/LaCie/edminiv2/Makefile index 00a255d5f5..c8d45f46fe 100644 --- a/board/LaCie/edminiv2/Makefile +++ b/board/LaCie/edminiv2/Makefile @@ -26,10 +26,13 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).o -COBJS := edminiv2.o +COBJS := edminiv2.o ../common/common.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index ee26893328..c1a01bc613 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -27,7 +27,6 @@ #include #include #include -#include "edminiv2.h" DECLARE_GLOBAL_DATA_PTR; @@ -96,33 +95,6 @@ int board_init(void) /* Configure and enable MV88E1116 PHY */ void reset_phy(void) { - u16 reg; - u16 devadr; - char *name = "egiga0"; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1116 Initialized on %s\n", name); + mv_phy_88e1116_init("egiga0"); } #endif /* CONFIG_RESET_PHY_R */ diff --git a/board/LaCie/edminiv2/edminiv2.h b/board/LaCie/edminiv2/edminiv2.h deleted file mode 100644 index 88e62b229c..0000000000 --- a/board/LaCie/edminiv2/edminiv2.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2009 - * Net Insight - * Written-by: Simon Kagstrom - * - * Based on sheevaplug.h: - * (C) Copyright 2009 - * Marvell Semiconductor - * Written-by: Prafulla Wadaskar - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef __EDMINIV2_BASE_H -#define __EDMINIV2_BASE_H - -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -#endif /* __EDMINIV2_BASE_H */ diff --git a/board/LaCie/net2big_v2/Makefile b/board/LaCie/net2big_v2/Makefile index 4bacef4da4..fbae48ef24 100644 --- a/board/LaCie/net2big_v2/Makefile +++ b/board/LaCie/net2big_v2/Makefile @@ -21,10 +21,13 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).o -COBJS := net2big_v2.o +COBJS := $(BOARD).o ../common/common.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c index 16d1405478..d0b4adffc0 100644 --- a/board/LaCie/net2big_v2/net2big_v2.c +++ b/board/LaCie/net2big_v2/net2big_v2.c @@ -21,15 +21,14 @@ */ #include -#include -#include #include -#include #include #include #include #include + #include "net2big_v2.h" +#include "../common/common.h" DECLARE_GLOBAL_DATA_PTR; @@ -92,91 +91,29 @@ int board_init(void) return 0; } +#if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { -#ifdef CONFIG_CMD_I2C +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) if (!getenv("ethaddr")) { - ushort version; uchar mac[6]; - int ret; - - /* I2C-0 for on-board EEPROM */ - i2c_set_bus_num(0); - - /* Check layout version for EEPROM data */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - (uchar *) &version, 2); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - version = be16_to_cpu(version); - if (version < 1 || version > 3) { - printf("Error: unknown version %d for EEPROM data\n", - version); - return -1; - } - - /* Read Ethernet MAC address from EEPROM */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - eth_setenv_enetaddr("ethaddr", mac); + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); } -#endif /* CONFIG_CMD_I2C */ - +#endif return 0; } +#endif -void mv_phy_88e1116_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..(%s) could not read PHY dev address\n", __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - if (miiphy_read(name, devadr, MII_BMCR, ®) != 0) { - printf("Err..(%s) PHY status read failed\n", __func__); - return; - } - if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) { - printf("Err..(%s) PHY reset failed\n", __func__); - return; - } - - debug("88E1116 Initialized on %s\n", name); -} - +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) /* Configure and initialize PHY */ void reset_phy(void) { mv_phy_88e1116_init("egiga0"); } +#endif +#if defined(CONFIG_KIRKWOOD_GPIO) /* Return GPIO push button status */ static int do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -186,3 +123,4 @@ do_read_push_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD(button, 1, 1, do_read_push_button, "Return GPIO push button status 0=off 1=on", ""); +#endif diff --git a/board/LaCie/net2big_v2/net2big_v2.h b/board/LaCie/net2big_v2/net2big_v2.h index bbe67afab1..f9778f4f0c 100644 --- a/board/LaCie/net2big_v2/net2big_v2.h +++ b/board/LaCie/net2big_v2/net2big_v2.h @@ -32,12 +32,4 @@ /* Buttons */ #define NET2BIG_V2_GPIO_PUSH_BUTTON 34 -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - #endif /* NET2BIG_V2_H */ diff --git a/board/LaCie/netspace_v2/Makefile b/board/LaCie/netspace_v2/Makefile index d4a613fb6d..b43c3d3bfe 100644 --- a/board/LaCie/netspace_v2/Makefile +++ b/board/LaCie/netspace_v2/Makefile @@ -21,10 +21,13 @@ # include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif LIB = $(obj)lib$(BOARD).o -COBJS := netspace_v2.o +COBJS := $(BOARD).o ../common/common.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 6938a4370a..fbf020fde1 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -21,15 +21,14 @@ */ #include -#include -#include #include -#include #include #include #include #include + #include "netspace_v2.h" +#include "../common/common.h" DECLARE_GLOBAL_DATA_PTR; @@ -90,91 +89,29 @@ int board_init(void) return 0; } +#if defined(CONFIG_MISC_INIT_R) int misc_init_r(void) { #if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) if (!getenv("ethaddr")) { - ushort version; uchar mac[6]; - int ret; - - /* I2C-0 for on-board EEPROM */ - i2c_set_bus_num(0); - - /* Check layout version for EEPROM data */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, - (uchar *) &version, 2); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - version = be16_to_cpu(version); - if (version < 1 || version > 3) { - printf("Error: unknown version %d for EEPROM data\n", - version); - return -1; - } - - /* Read Ethernet MAC address from EEPROM */ - ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 2, - CONFIG_SYS_I2C_EEPROM_ADDR_LEN, mac, 6); - if (ret != 0) { - printf("Error: failed to read I2C EEPROM @%02x\n", - CONFIG_SYS_I2C_EEPROM_ADDR); - return ret; - } - eth_setenv_enetaddr("ethaddr", mac); + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); } -#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_EEPROM_ADDR */ - +#endif return 0; } +#endif -void mv_phy_88e1116_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..(%s) could not read PHY dev address\n", __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - if (miiphy_read(name, devadr, MII_BMCR, ®) != 0) { - printf("Err..(%s) PHY status read failed\n", __func__); - return; - } - if (miiphy_write(name, devadr, MII_BMCR, reg | 0x8000) != 0) { - printf("Err..(%s) PHY reset failed\n", __func__); - return; - } - - debug("88E1116 Initialized on %s\n", name); -} - +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) /* Configure and initialize PHY */ void reset_phy(void) { mv_phy_88e1116_init("egiga0"); } +#endif +#if defined(CONFIG_KIRKWOOD_GPIO) /* Return GPIO button status */ static int do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -184,3 +121,4 @@ do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD(button, 1, 1, do_read_button, "Return GPIO button status 0=off 1=on", ""); +#endif diff --git a/board/LaCie/netspace_v2/netspace_v2.h b/board/LaCie/netspace_v2/netspace_v2.h index 3f3d51ccd7..34e492c77e 100644 --- a/board/LaCie/netspace_v2/netspace_v2.h +++ b/board/LaCie/netspace_v2/netspace_v2.h @@ -31,12 +31,4 @@ #define NETSPACE_V2_GPIO_BUTTON 32 -/* PHY related */ -#define MV88E1116_LED_FCTRL_REG 10 -#define MV88E1116_CPRSP_CR3_REG 21 -#define MV88E1116_MAC_CTRL_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - #endif /* NETSPACE_V2_H */ diff --git a/boards.cfg b/boards.cfg index d16789b9b5..9869dd63f0 100644 --- a/boards.cfg +++ b/boards.cfg @@ -140,10 +140,10 @@ km_kirkwood arm arm926ejs km_arm keymile km_kirkwood_pci arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_RECONFIG_XLX mgcoge3un arm arm926ejs km_arm keymile kirkwood portl2 arm arm926ejs km_arm keymile kirkwood -inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:INETSPACE_V2 -net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood -netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_V2 -netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood netspace_v2:NETSPACE_MAX_V2 +inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2 +net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2 +netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 +netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood diff --git a/include/configs/netspace_v2.h b/include/configs/lacie_kw.h similarity index 89% rename from include/configs/netspace_v2.h rename to include/configs/lacie_kw.h index 1ddf4b4b6c..6cbc752fbd 100644 --- a/include/configs/netspace_v2.h +++ b/include/configs/lacie_kw.h @@ -15,8 +15,8 @@ * GNU General Public License for more details. */ -#ifndef _CONFIG_NETSPACE_V2_H -#define _CONFIG_NETSPACE_V2_H +#ifndef _CONFIG_LACIE_KW_H +#define _CONFIG_LACIE_KW_H /* * Machine number definition @@ -30,6 +30,9 @@ #elif defined(CONFIG_NETSPACE_MAX_V2) #define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2 #define CONFIG_IDENT_STRING " NS Max v2" +#elif defined(CONFIG_NET2BIG_V2) +#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2 +#define CONFIG_IDENT_STRING " 2Big v2" #else #error "Unknown board" #endif @@ -56,11 +59,19 @@ #define CONFIG_CMD_USB /* - * Core clock definition. + * Core clock definition */ #define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +/* + * SDRAM configuration + */ +#if defined(CONFIG_NET2BIG_V2) +#define CONFIG_NR_DRAM_BANKS 2 +#else #define CONFIG_NR_DRAM_BANKS 1 +#endif + #ifdef CONFIG_INETSPACE_V2 /* Different SDRAM configuration and size for Internet Space v2 */ #define CONFIG_SYS_KWD_CONFIG ($(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg) @@ -81,7 +92,11 @@ #define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_IDE_MAXDEVICE 1 +#if defined(CONFIG_NET2BIG_V2) +#define CONFIG_SYS_PROMPT "2big2> " +#else #define CONFIG_SYS_PROMPT "ns2> " +#endif /* * Ethernet Driver configuration @@ -97,11 +112,10 @@ */ #ifdef CONFIG_MVSATA_IDE #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -/* Network Space Max v2 use 2 SATA ports */ -#ifdef CONFIG_NETSPACE_MAX_V2 +#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2) #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif -#endif +#endif /* CONFIG_MVSATA_IDE */ /* * Enable GPI0 support @@ -176,4 +190,4 @@ "usbload=usb start && " \ "fatload usb 0:1 $loadaddr /boot/$bootfile\0" -#endif /* _CONFIG_NETSPACE_V2_H */ +#endif /* _CONFIG_LACIE_KW_H */ diff --git a/include/configs/net2big_v2.h b/include/configs/net2big_v2.h deleted file mode 100644 index 9cf76d0435..0000000000 --- a/include/configs/net2big_v2.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 2011 Simon Guinot - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _CONFIG_NET2BIG_V2_H -#define _CONFIG_NET2BIG_V2_H - -/* - * Machine number information - */ -#define CONFIG_IDENT_STRING " 2Big v2" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KIRKWOOD /* SOC Family Name */ -#define CONFIG_KW88F6281 /* SOC Name */ -#define CONFIG_MACH_NET2BIG_V2 /* Machine type */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ - -/* - * Commands configuration - */ -#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ -#include -#define CONFIG_CMD_ENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_SF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IDE -#define CONFIG_CMD_USB - -/* - * Core clock definition. - */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#define CONFIG_NR_DRAM_BANKS 2 -#include "mv-common.h" - -/* Remove or override few declarations from mv-common.h */ -#undef CONFIG_RBTREE -#undef CONFIG_ENV_SPI_MAX_HZ -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE -#undef CONFIG_SYS_PROMPT -#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_PROMPT "2big2> " - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MISC_INIT_R /* Call misc_init_r() to initialize MAC address */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_NETCONSOLE -#endif - -/* - * SATA Driver configuration - */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif - -/* - * Enable GPI0 support - */ -#define CONFIG_KIRKWOOD_GPIO - -/* - * Enable I2C support - */ -#ifdef CONFIG_CMD_I2C -/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ -#define CONFIG_CMD_EEPROM -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ -#endif /* CONFIG_CMD_I2C */ - -/* - * File systems support - */ -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - -/* - * Use the HUSH parser - */ -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " - -/* - * Console configuration - */ -#define CONFIG_CONSOLE_MUX -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* - * Enable device tree support - */ -#define CONFIG_OF_LIBFDT - -/* - * Environment variables configurations - */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64KB */ -#define CONFIG_ENV_SIZE 0x1000 /* 4KB */ -#define CONFIG_ENV_ADDR 0x70000 -#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */ - -/* - * Default environment variables - */ -#define CONFIG_BOOTARGS "console=ttyS0,115200" - -#define CONFIG_BOOTCOMMAND \ - "dhcp && run netconsole; " \ - "if run usbload || run diskload; then bootm; fi" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "stdin=serial\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ - "bootfile=uImage\0" \ - "loadaddr=0x800000\0" \ - "autoload=no\0" \ - "netconsole=" \ - "set stdin $stdin,nc; " \ - "set stdout $stdout,nc; " \ - "set stderr $stderr,nc;\0" \ - "diskload=ide reset && " \ - "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ - "usbload=usb start && " \ - "fatload usb 0:1 $loadaddr /boot/$bootfile\0" - -#endif /* _CONFIG_NET2BIG_V2_H */