From: Dipen Dudhat <dipen.dudhat@freescale.com>
Date: Mon, 5 Oct 2009 10:11:58 +0000 (+0530)
Subject: ppc/85xx: PIO Support for FSL eSDHC Controller Driver
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=77c1458d;p=u-boot.git

ppc/85xx: PIO Support for FSL eSDHC Controller Driver

On some Freescale SoC Internal DMA of eSDHC controller has bug.
So PIO Mode has been introduced to do data transfer using CPU.

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
---

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 0f6f8b161c..a9b07a97c7 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -72,8 +72,10 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 	uint xfertyp = 0;
 
 	if (data) {
-		xfertyp |= XFERTYP_DPSEL | XFERTYP_DMAEN;
-
+		xfertyp |= XFERTYP_DPSEL;
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+		xfertyp |= XFERTYP_DMAEN;
+#endif
 		if (data->blocks > 1) {
 			xfertyp |= XFERTYP_MSBSEL;
 			xfertyp |= XFERTYP_BCEN;
@@ -97,6 +99,71 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 	return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
 }
 
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
+/*
+ * PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
+ */
+static int
+esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
+{
+	struct fsl_esdhc *regs = mmc->priv;
+	uint blocks;
+	char *buffer;
+	uint databuf;
+	uint size;
+	uint irqstat;
+	uint timeout;
+
+	if (data->flags & MMC_DATA_READ) {
+		blocks = data->blocks;
+		buffer = data->dest;
+		while (blocks) {
+			timeout = PIO_TIMEOUT;
+			size = data->blocksize;
+			irqstat = esdhc_read32(&regs->irqstat);
+			while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BREN)
+				&& --timeout);
+			if (timeout <= 0) {
+				printf("\nData Read Failed in PIO Mode.");
+				return timeout;
+			}
+			while (size && (!(irqstat & IRQSTAT_TC))) {
+				udelay(100); /* Wait before last byte transfer complete */
+				irqstat = esdhc_read32(&regs->irqstat);
+				databuf = in_le32(&regs->datport);
+				*((uint *)buffer) = databuf;
+				buffer += 4;
+				size -= 4;
+			}
+			blocks--;
+		}
+	} else {
+		blocks = data->blocks;
+		buffer = data->src;
+		while (blocks) {
+			timeout = PIO_TIMEOUT;
+			size = data->blocksize;
+			irqstat = esdhc_read32(&regs->irqstat);
+			while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_BWEN)
+				&& --timeout);
+			if (timeout <= 0) {
+				printf("\nData Write Failed in PIO Mode.");
+				return timeout;
+			}
+			while (size && (!(irqstat & IRQSTAT_TC))) {
+				udelay(100); /* Wait before last byte transfer complete */
+				databuf = *((uint *)buffer);
+				buffer += 4;
+				size -= 4;
+				irqstat = esdhc_read32(&regs->irqstat);
+				out_le32(&regs->datport, databuf);
+			}
+			blocks--;
+		}
+	}
+}
+#endif
+
 static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 {
 	uint wml_value;
@@ -104,6 +171,17 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
 
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
+	if (!(data->flags & MMC_DATA_READ)) {
+		if ((esdhc_read32(&regs->prsstat) & PRSSTAT_WPSPL) == 0) {
+			printf("\nThe SD card is locked. "
+				"Can not write to a locked card.\n\n");
+			return TIMEOUT;
+		}
+		esdhc_write32(&regs->dsaddr, (u32)data->src);
+	} else
+		esdhc_write32(&regs->dsaddr, (u32)data->dest);
+#else
 	wml_value = data->blocksize/4;
 
 	if (data->flags & MMC_DATA_READ) {
@@ -124,6 +202,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
 					wml_value << 16);
 		esdhc_write32(&regs->dsaddr, (u32)data->src);
 	}
+#endif
 
 	esdhc_write32(&regs->blkattr, data->blocks << 16 | data->blocksize);
 
@@ -220,6 +299,9 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 
 	/* Wait until all of the blocks are transferred */
 	if (data) {
+#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
+		esdhc_pio_read_write(mmc, data);
+#else
 		do {
 			irqstat = esdhc_read32(&regs->irqstat);
 
@@ -230,6 +312,7 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 				return TIMEOUT;
 		} while (!(irqstat & IRQSTAT_TC) &&
 				(esdhc_read32(&regs->prsstat) & PRSSTAT_DLA));
+#endif
 	}
 
 	esdhc_write32(&regs->irqstat, -1);
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index f9ae15ad42..477bbd792e 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -90,6 +90,7 @@
 #define PRSSTAT_CDPL		(0x00040000)
 #define PRSSTAT_CINS		(0x00010000)
 #define PRSSTAT_BREN		(0x00000800)
+#define PRSSTAT_BWEN		(0x00000400)
 #define PRSSTAT_DLA		(0x00000004)
 #define PRSSTAT_CICHB		(0x00000002)
 #define PRSSTAT_CIDHB		(0x00000001)
@@ -121,6 +122,7 @@
 #define XFERTYP_DMAEN		0x00000001
 
 #define CINS_TIMEOUT		1000
+#define PIO_TIMEOUT		100000
 
 #define DSADDR		0x2e004