From: Andrejs Cainikovs Date: Fri, 3 Mar 2023 13:26:34 +0000 (+0100) Subject: colibri-imx8x: drop obsolete environment variables X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=77532779d481b6f9795b1c6862600c53b87ae4f2;p=u-boot.git colibri-imx8x: drop obsolete environment variables Drop obsolete environment variables boot_file, bootcmd_mfg, fdt_addr, finduuid, image, mfgtool_args, mmcargs, mmcdev, mmcpart, panel, sec_boot, vidargs. Signed-off-by: Andrejs Cainikovs --- diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 9a4a5f3b5d..94243117f1 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -8,7 +8,6 @@ #include #include -#include #define MEM_LAYOUT_ENV_SETTINGS \ "fdt_addr_r=0x83000000\0" \ @@ -16,12 +15,6 @@ "ramdisk_addr_r=0x83800000\0" \ "scriptaddr=0x80800000\0" -#ifdef CONFIG_AHAB_BOOT -#define AHAB_ENV "sec_boot=yes\0" -#else -#define AHAB_ENV "sec_boot=no\0" -#endif - /* Boot M4 */ #define M4_BOOT_ENV \ "m4_0_image=m4_0.bin\0" \ @@ -29,8 +22,6 @@ "${m4_0_image}\0" \ "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \ -#define MFG_NAND_PARTITION "" - /* Enable Distro Boot */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ @@ -38,47 +29,23 @@ func(DHCP, dhcp, na) #include -#define CFG_MFG_ENV_SETTINGS \ - "mfgtool_args=setenv bootargs ${consoleargs} " \ - "rdinit=/linuxrc g_mass_storage.stall=0 " \ - "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \ - "g_mass_storage.idProduct=0x37FF " \ - "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \ - "${vidargs} clk_ignore_unused\0" \ - "initrd_addr=0x83800000\0" \ - "initrd_high=0xffffffff\0" \ - "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \ - "${fdt_addr};\0" \ - /* Initial environment variables */ #define CFG_EXTRA_ENV_SETTINGS \ - AHAB_ENV \ BOOTENV \ - CFG_MFG_ENV_SETTINGS \ M4_BOOT_ENV \ MEM_LAYOUT_ENV_SETTINGS \ - "boot_file=Image\0" \ "boot_script_dhcp=boot.scr\0" \ "console=ttyLP3\0" \ - "fdt_addr=0x83000000\0" \ "fdt_board=eval-v3\0" \ - "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ - "image=Image\0" \ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "mmcargs=setenv bootargs ${consoleargs} " \ - "root=PARTUUID=${uuid} rootwait " \ - "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=1\0" \ - "panel=NULL\0" \ "setup=setenv setupargs console=tty1 console=${console},${baudrate} " \ "consoleblank=0 earlycon\0" \ "update_uboot=askenv confirm Did you load flash.bin resp. u-boot-dtb.imx (y/N)?; " \ "if test \"$confirm\" = \"y\"; then " \ "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \ "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \ - "${blkcnt}; fi\0" \ - "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" + "${blkcnt}; fi\0" #define CFG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000