From: Wolfgang Denk Date: Sun, 14 Jun 2009 18:58:47 +0000 (+0200) Subject: MPC512x: factor out common code X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7629f1c06b6dea36bbc7bf70820b824e9b6d2227;p=u-boot.git MPC512x: factor out common code Now that we have 3 boards for the MPC512x it turns out that they all use the very same fixed_sdram() code. This patch factors out this common code into cpu/mpc512x/fixed_sdram.c and adds a new header file, include/asm-ppc/mpc512x.h, with some macros, inline functions and prototype definitions specific to MPC512x systems. Signed-off-by: Wolfgang Denk Cc: Stefan Roese Cc: Reinhard Arlt --- diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index f44c352493..9662308782 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #ifdef CONFIG_MISC_INIT_R #include @@ -34,9 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern int mpc5121_diu_init(void); -extern void ide_set_reset(int idereset); - /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ CLOCK_SCCR1_LPC_EN | \ @@ -53,14 +51,9 @@ extern void ide_set_reset(int idereset); CLOCK_SCCR2_DIU_EN | \ CLOCK_SCCR2_I2C_EN) -#define CSAW_START(start) ((start) & 0xFFFF0000) -#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) - -long int fixed_sdram(void); - int board_early_init_f(void) { - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; u32 spridr; /* @@ -71,14 +64,7 @@ int board_early_init_f(void) CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE) ); out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - in_be32(&im->sysconf.lpcs2aw); - __asm__ __volatile__ ("isync"); + sync_law(&im->sysconf.lpcs2aw); /* * Initialize Local Window for the On Board SRAM access @@ -88,14 +74,7 @@ int board_early_init_f(void) CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE) ); out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG); - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - in_be32(&im->sysconf.lpcs6aw); - __asm__ __volatile__ ("isync"); + sync_law(&im->sysconf.lpcs6aw); /* * Configure Flash Speed @@ -124,100 +103,6 @@ phys_size_t initdram (int board_type) return fixed_sdram(); } -/* - * fixed sdram init: - * The board doesn't use memory modules that have serial presence - * detect or similar mechanism for discovery of the DRAM settings - */ -long int fixed_sdram (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2(msize); - u32 i; - - /* Initialize IO Control */ - out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); - - /* Initialize DDR Local Window */ - out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); - out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1); - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - in_be32(&im->sysconf.ddrlaw.ar); - __asm__ __volatile__ ("isync"); - - /* Enable DDR */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); - - /* Initialize DDR Priority Manager */ - out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); - out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); - out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); - out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); - out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); - out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); - out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); - out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); - out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); - out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); - out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); - out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); - out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); - out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); - out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); - out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); - out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); - out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); - out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); - out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); - out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); - out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); - out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); - - /* Initialize MDDRC */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); - out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); - out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); - - /* Initialize DDR */ - for (i = 0; i < 10; i++) - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - /* Start MDDRC */ - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); - - return msize; -} - int misc_init_r(void) { u32 tmp; @@ -295,7 +180,6 @@ static iopin_t ioregs_init[] = { }, }; - int checkboard (void) { puts("Board: ARIA\n"); diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index bff96db72a..f591e32621 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -28,6 +28,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -46,9 +47,6 @@ DECLARE_GLOBAL_DATA_PTR; #define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ CLOCK_SCCR2_I2C_EN) -#define CSAW_START(start) ((start) & 0xFFFF0000) -#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) - int eeprom_write_enable(unsigned dev_addr, int state) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -61,18 +59,7 @@ int eeprom_write_enable(unsigned dev_addr, int state) else clrbits_be32(&im->gpio.gpdat, 0x00100000); -return 0; -} - -/* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync. - */ -static inline void sync_law(volatile void *addr) -{ - in_be32(addr); - __asm__ __volatile__ ("isync"); + return 0; } int board_early_init_f(void) @@ -146,93 +133,6 @@ int board_early_init_f(void) return 0; } -/* - * fixed sdram init: - * The board doesn't use memory modules that have serial presence - * detect or similar mechanism for discovery of the DRAM settings - */ -long int fixed_sdram(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2(msize); - u32 i; - - /* Initialize IO Control */ - out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); - - /* Initialize DDR Local Window */ - out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); - out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1); - sync_law(&im->sysconf.ddrlaw.ar); - - /* Enable DDR */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); - - /* Initialize DDR Priority Manager */ - out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); - out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); - out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); - out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); - out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); - out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); - out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); - out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); - out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); - out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); - out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); - out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); - out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); - out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); - out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); - out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); - out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); - out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); - out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); - out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); - out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); - out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); - out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); - - /* Initialize MDDRC */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); - out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); - out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); - - /* Initialize DDR */ - for (i = 0; i < 10; i++) - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - /* Start MDDRC */ - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); - - return msize; -} - phys_size_t initdram(int board_type) { return get_ram_size(0, fixed_sdram()); diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index ec74fd35d2..a0d7a82e4b 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #ifdef CONFIG_MISC_INIT_R #include @@ -36,9 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern int mpc5121_diu_init(void); -extern void ide_set_reset(int idereset); - /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ CLOCK_SCCR1_DDR_EN | \ @@ -56,10 +54,6 @@ extern void ide_set_reset(int idereset); CLOCK_SCCR2_MEM_EN | \ CLOCK_SCCR2_SPDIF_EN) -#define CSAW_START(start) ((start) & 0xFFFF0000) -#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) - -long int fixed_sdram(void); void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip); /* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */ @@ -84,10 +78,10 @@ void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) out_8(csreg, v); } -int board_early_init_f (void) +int board_early_init_f(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 lpcaw, spridr; + u32 spridr; /* * Initialize Local Window for the CPLD registers access (CS2 selects @@ -98,14 +92,7 @@ int board_early_init_f (void) CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE) ); out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - lpcaw = in_be32(&im->sysconf.lpcs6aw); - __asm__ __volatile__ ("isync"); + sync_law(&im->sysconf.lpcs2aw); /* * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control @@ -146,104 +133,11 @@ int board_early_init_f (void) return 0; } -phys_size_t initdram (int board_type) +phys_size_t initdram(int board_type) { u32 msize = 0; - msize = fixed_sdram (); - - return msize; -} - -/* - * fixed sdram init -- the board doesn't use memory modules that have serial presence - * detect or similar mechanism for discovery of the DRAM settings - */ -long int fixed_sdram (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2 (msize); - u32 i; - - /* Initialize IO Control */ - out_be32 (&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); - - /* Initialize DDR Local Window */ - out_be32 (&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); - out_be32 (&im->sysconf.ddrlaw.ar, msize_log2 - 1); - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - in_be32(&im->sysconf.ddrlaw.ar); - __asm__ __volatile__ ("isync"); - - /* Enable DDR */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); - - /* Initialize DDR Priority Manager */ - out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); - out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); - out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); - out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); - out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); - out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); - out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); - out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); - out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); - out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); - out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); - out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); - out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); - out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); - out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); - out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); - out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); - out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); - out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); - out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); - out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); - out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); - out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); - - /* Initialize MDDRC */ - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); - out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); - out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); - - /* Initialize DDR */ - for (i = 0; i < 10; i++) - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); - - /* Start MDDRC */ - out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); - out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); + msize = fixed_sdram(); return msize; } diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile index 022c676dec..427db7ae04 100644 --- a/cpu/mpc512x/Makefile +++ b/cpu/mpc512x/Makefile @@ -27,7 +27,15 @@ $(shell mkdir -p $(OBJTREE)/board/freescale/common) LIB = $(obj)lib$(CPU).a START = start.o -COBJS-y := traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o +COBJS-y := cpu.o +COBJS-y += traps.o +COBJS-y += cpu_init.o +COBJS-y += fixed_sdram.o +COBJS-y += i2c.o +COBJS-y += interrupts.o +COBJS-y += iopin.o +COBJS-y += serial.o +COBJS-y += speed.o COBJS-${CONFIG_FSL_DIU_FB} += diu.o COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o diff --git a/cpu/mpc512x/fixed_sdram.c b/cpu/mpc512x/fixed_sdram.c new file mode 100644 index 0000000000..d906903d28 --- /dev/null +++ b/cpu/mpc512x/fixed_sdram.c @@ -0,0 +1,113 @@ +/* + * (C) Copyright 2007-2009 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include + +/* + * fixed sdram init: + * The board doesn't use memory modules that have serial presence + * detect or similar mechanism for discovery of the DRAM settings + */ +long int fixed_sdram(void) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2(msize); + u32 i; + + /* Initialize IO Control */ + out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); + + /* Initialize DDR Local Window */ + out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); + out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1); + sync_law(&im->sysconf.ddrlaw.ar); + + /* Enable DDR */ + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); + + /* Initialize DDR Priority Manager */ + out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); + out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); + out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); + out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); + out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); + out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); + out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); + out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); + out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); + out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); + out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); + out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); + out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); + out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); + out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); + out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); + out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); + out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); + out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); + out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); + out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); + out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); + out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); + + /* Initialize MDDRC */ + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); + out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); + out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); + + /* Initialize DDR */ + for (i = 0; i < 10; i++) + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + + /* Start MDDRC */ + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); + + return msize; +} diff --git a/include/asm-ppc/mpc512x.h b/include/asm-ppc/mpc512x.h new file mode 100644 index 0000000000..20456f52f7 --- /dev/null +++ b/include/asm-ppc/mpc512x.h @@ -0,0 +1,57 @@ +/* + * include/asm-ppc/mpc512x.h + * + * Prototypes, etc. for the Freescale MPC512x embedded cpu chips + * + * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASMPPC_MPC512X_H +#define __ASMPPC_MPC512X_H + +/* + * macros for manipulating CSx_START/STOP + */ +#define CSAW_START(start) ((start) & 0xFFFF0000) +#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) + +/* + * Inlines + */ + +/* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync. + */ +static inline void sync_law(volatile void *addr) +{ + in_be32(addr); + __asm__ __volatile__ ("isync"); +} + +/* + * Prototypes + */ +extern long int fixed_sdram(void); +extern int mpc5121_diu_init(void); +extern void ide_set_reset(int idereset); + +#endif /* __ASMPPC_MPC512X_H */