From: Marek Vasut <marex@denx.de>
Date: Sun, 12 Jul 2015 13:23:28 +0000 (+0200)
Subject: arm: socfpga: config: Move SPL GD and malloc to RAM
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=7599b53dc1a1c89457a755858d4b6946e0e7fadd;p=u-boot.git

arm: socfpga: config: Move SPL GD and malloc to RAM

Now that the SPL structure is organised such that it matches the
U-Boot's SPL design, it is possible to use the option of relocating
GD to RAM. And since we have GD in RAM, move malloc area to RAM as
well. We point the malloc base pointer 1 MiB past U-Boot's load
address. We use simple malloc for SPL because it is 3kiB smaller
in terms of code size than regular malloc which was used thus far.

Signed-off-by: Marek Vasut <marex@denx.de>
---

diff --git a/arch/arm/mach-socfpga/spl.c b/arch/arm/mach-socfpga/spl.c
index 82570f8617..13ec24bc16 100644
--- a/arch/arm/mach-socfpga/spl.c
+++ b/arch/arm/mach-socfpga/spl.c
@@ -178,5 +178,8 @@ void board_init_f(ulong dummy)
 
 	socfpga_bridges_reset(1);
 
+	/* Configure simple malloc base pointer into RAM. */
+	gd->malloc_base = CONFIG_SYS_TEXT_BASE + (1024 * 1024);
+
 	board_init_r(NULL, 0);
 }
diff --git a/configs/socfpga_arria5_defconfig b/configs/socfpga_arria5_defconfig
index ee03156046..4d1cd21c15 100644
--- a/configs/socfpga_arria5_defconfig
+++ b/configs/socfpga_arria5_defconfig
@@ -14,3 +14,6 @@ CONFIG_SPL_SIMPLE_BUS=y
 CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/socfpga_cyclone5_defconfig b/configs/socfpga_cyclone5_defconfig
index 75ed347f0e..ae3a1dea91 100644
--- a/configs/socfpga_cyclone5_defconfig
+++ b/configs/socfpga_cyclone5_defconfig
@@ -17,3 +17,6 @@ CONFIG_SPL_SIMPLE_BUS=y
 CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig
index 2e50ce9a2c..71d4711679 100644
--- a/configs/socfpga_socrates_defconfig
+++ b/configs/socfpga_socrates_defconfig
@@ -17,3 +17,6 @@ CONFIG_SPL_SIMPLE_BUS=y
 CONFIG_DM_SPI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x00800000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index bed8600a94..60a602517f 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -39,10 +39,11 @@
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1_SIZE
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0xFFFF0000
-#define CONFIG_SYS_INIT_RAM_SIZE	(0x10000 - CONFIG_SYS_SPL_MALLOC_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR					\
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE -	\
-	GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_SP_OFFSET		\
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR			\
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
@@ -290,9 +291,10 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_RAM_DEVICE
 #define CONFIG_SPL_TEXT_BASE		CONFIG_SYS_INIT_RAM_ADDR
-#define CONFIG_SYS_SPL_MALLOC_START	CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SYS_SPL_MALLOC_SIZE	(5 * 1024)
 #define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
 
 #define CHUNKSZ_CRC32			(1 * 1024)	/* FIXME: ewww */
 #define CONFIG_CRC32_VERIFY